MC1458 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Philips Semiconductors Linear Products Product specification MC/SA1458/MC1558General purpose operational amplifier 59August 31, 1994 853-1062 13721

DESCRIPTION

The MC1458 is a high-performance operational amplifier with high open-loop gain, internal compensation, high common-mode range and exceptional temperature stability. The MC1458 is short-circuit protected. The MC1458/SA1458/MC1558 consists of a pair of 741 operational amplifiers on a single chip.

FEATURES

  • Internal frequency compensation
  • Short-circuit protection
  • Excellent temperature stability
  • High input voltage range
  • No latch-up
  • 1558/1458 are 2 “op amps” in space of one 741 package PIN CONFIGURATION 4 5 – + + –A B OUTPUT B INVERTING INPUT B NON -INVERTING INPUT B OUTPUT A INVERTING INPUT A NON -INVERTING INPUT A D, N Packages TOP VIEW

ORDERING INFORMATION

DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG # 8-Pin Plastic Small Outline (SO) Package 0 to +70°C MC1458D 0174C 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C MC1458N 0404B 8-Pin Plastic Small Outline (SO) Package -40°C to +85°C SA1458D 0174C 8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA1458N 0404B 8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C MC1558N 0404B ABSOLUTE MAXIMUM RATINGS SYMBOL PARAMETER RATING UNIT VS Supply voltage MC1458 ±18 V SA1458 ±18 V MC1558 ±22 V TJ Junction temperature +150 °C PD MAX Maximum power dissipation, TA=25°C (still-air)1 N package 1160 mW D package 780 mW VDIFF Differential input voltage ±30 V VIN Input voltage2 ±15 V Output short-circuit duration Continuous TA Operating ambient temperature range MC1458 0 to +70 °C SA1458 -40 to +85 °C MC1558 -55 to +125 °C TSTG Storage temperature range -65 to +150 °C TSOLD Lead soldering temperature (10sec max) 300 °C NOTES: 1. The following derating factors should be applied above 25°C; N package at 9.3mW/°C; D package at 6.2mW/°C 2. For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.

Philips Semiconductors Linear Products Product specification MC/SA1458/MC1558General purpose operational amplifier August 31, 1994 60 EQUIVALENT SCHEMATIC Amplifier “A” of MC1458, SA1458, MC1558 NON–INVERTING INPUT 3 Q5 Q6 1K Ω 50K Ω 1kΩ INVERT. INPUT Q9 Q12 Q13 39K Ω Q10 Q11 Q22 Q14 25Ω OUTPUT R10 50Ω Q20 Q16 Q17 Q18 Q15 R11 50ΩR12 50kΩ 4.5KΩ 7.5KΩ 5kΩ DC ELECTRICAL CHARACTERISTICS TA=25°C, VS=±15V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS MC1558 UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max UNIT VOS Offset voltage R S=10kΩ 1.0 5.0 mV R S=10kΩ , over temperature 6.0 mV ΔVOS Offset voltage Over temperature 10 µV/°C IOS Offset current 20 200 nA Over temperature 500 nA ΔIOS Offset current Over temperature 0.10 nA/°C IBIAS Input bias current 80 500 nA Over temperature 1500 nA ΔIBIAS Bias current Over temperature 1.0 nA/°C VOUT Output voltage swing R L=10kΩ , over temperature ±12 ±14 VVOUT Output voltage swing R L=2kΩ , over temperature ±10 ±13 V AVOL Large-signal voltage gain R L=2kΩ ,VO =±10V 50 100 V/mVAVOL Large-signal voltage gain R L=2kΩ , VO =± temperature 20 V/mV Offset voltage adjustment range ±30 mV PSRR Power supply rejection ratio R S≤10kΩ 30 150 µV/V CMRR Common mode rejection ratio 70 90 dB ICC Supply current 2.3 5.0 mA VIN Input voltage range ±12 ±13 V PD Power consumption 70 150 mW Channel separation 120 dB R OUT Output resistance 75 Ω ISC Output short-circuit current 10 25 60 mA

Philips Semiconductors Linear Products Product specification MC/SA1458/MC1558General purpose operational amplifier August 31, 1994 61 DC ELECTRICAL CHARACTERISTICS (Continued) TA=25°C VCC =±15V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS MC1458 SA1458 UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max Min Typ Max UNIT VOS Offset voltage R S=10kΩ 2.0 6.0 2.0 6.0 mV R S=10kΩ , over temp. 7.5 7.5 mV ΔVOS Offset voltage Over temperature 12 12 µV/°C IOS Offset current 20 200 20 200 nA Over temperature 300 500 nA ΔIOS Offset current Over temperature 0.10 0.10 nA/°C IBIAS Input bias current 80 500 80 500 nA Over temperature 800 1500 nA ΔIBIAS Bias current Over temperature 1.0 1.0 nA/°C VOUT Output voltage swing R L=10kΩ , over temp. ±12 ±14 ±12 ±14 VVOUT Output voltage swing R L=2kΩ , over temp. ±10 ±13 ±10 ±13 V R L=2kΩ , VO =±10V 25 200 20 200 V/mV AVOL Large-signal voltage gain R L=2kΩ , VO =±10V, Over temperature 15 15 V/mV Offset voltage adjustment range ±30 ±30 mV PSRR Power supply rejection ratio R S≤10kΩ 30 150 30 150 µV/V CMRR Common-mode rejection ratio 70 90 70 90 dB ICC Supply current 2.3 5.6 2.3 5.6 mA VIN Input voltage range ±12 ±13 ±12 ±13 V R IN Input resistance 0.3 1 0.3 1 M Ω PD Power consumption 70 170 70 170 mW Channel separation 120 120 dB ISC Output short-circuit current 25 25 mA AC ELECTRICAL CHARACTERISTICS TA=25°C VS=±15V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS MC1458, SA1458, MC1558 UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max UNIT R IN Parallel input resistance Open-loop, f=20Hz 0.3 M Ω Common-mode input impedance f=20Hz 200 M Ω Equivalent input noise voltage AV=100, RS=10kΩ , BW=1.0kHz, f=1.0kHz 30 nV Hz BW Power bandwidth AV=1, RL=2.0kΩ , THD≤5%, VOUT =20VP-P 14 kHz Phase margin 65 degrees AV Gain margin 11 dB Unity gain crossover frequency Open loop 1.0 MHz Transient response unity gain VIN=20mV, RL=2kΩ , CL≤100pF tR Rise time 0.3 µs Overshoot 5.0 % SR Slew rate C L≤100pF, RL≥2kΩ , VIN=±10V 0.8 V/µs

Philips Semiconductors Linear Products Product specification MC/SA1458/MC1558General purpose operational amplifier August 31, 1994 62 TYPICAL PERFORMANCE CHARACTERISTICS VS = +15V –55oC < TA < + 125O C R L > 2kΩ 5 10 15 20 SUPPLY VOLTAGE — + V PEAK–TO–PEAK OUTPUT SWING — V Output Voltage Swing as a Function of Supply Voltage –55oC < TA < + 125O C 0 5 10 15 20 SUPPLY VOLTAGE — + V COMMON MODE VOL TAGE RANGE – V+ Input Common–Mode Range as a Function of Supply Voltage TA = 25oC 100 5 10 15 20 POWER CONSUMPTION — mW SUPPLY VOLTAGE — + V 500 400 300 200 100 –60 –20 20 60 100 140 TEMPERATURE — oC INPUT BIAS CURRENT — nA VS = +15V 10.0 5.0 3.0 1.0 0.5 0.3 INPUT RESIST ANCE — M Ω 0.1 –60 –20 20 60 100 140 TEMPERATURE — oC TA = 25oC 5 10 15 20 INPUT OFFSET CURRENT — nA SUPPLY VOLTAGE — + V Input Bias Current as a Function Of Ambient Temperature Input Resistance as a Function of Ambient Temperature Power Consumption as a Function of Supply Voltage Input Offset Current as a Function of Supply Voltage VS = +15V 140 120 100 –60 –20 20 60 100 140 TEMPERATURE — oC INPUT OFFSET CURRENT — nA TEMPERATURE — oC POWER CONSUMPTION — mV –60 –20 20 60 100 140 Input Offset Current as a Function of Ambient Temperature Power Consumption as a Function of Ambient Temperature LOAD RESISTANCE — k Ω PEAK–TO–PEAK OUTPUT SWING — V VS = + 15V TA = 25oC Output Voltage Swing as a Function of Load Resistance

Philips Semiconductors Linear Products Product specification MC/SA1458/MC1558General purpose operational amplifier August 31, 1994 63 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) MEAN SQUARE VOL TAGE — A Hz2 10–1kHz –60 –20 20 60 100 140 TEMPERATURE — oC SHORT CIRCUIT CURRENT — mA VS = + 15V TA = 25oC 10 –13 10 –14 10 –15 10 –16 10 –17 10 –18 10 100 1K 10K 100K FREQUENCY — Hz MEAN SQUARE VOL TAGE — V Hz2 VS = + 15V TA = 25oC MEAN SQUARE CURRENT 10 –21 10 –22 10 –23 10 –24 10 –25 10 –26 10 100 1K 10K 100K FREQUENCY — Hz 100 0.1 100 1K 10K 100K 10–100kHz 10–100kHz SOURCE RESISTANCE — Ω TOTAL NOISE REFERRED T O INPUT — Vrmsµ VS = + 15V TA = 25oC 106 105 104 103 102 1 10 100 1K 10K 100K 1M 10M FREQUENCY — Hz VOLTAGE GAIN 1 10 100 1K 10K 100K 1M 10M FREQUENCY — Hz VS = + 15V TA = 25oC –45 –90 –135 –180 PHASE DEGREES VS = + 15V TA = 25oC R L = 10kΩ 100 1K 10K 100K 1M FREQUENCY — Hz PEAK–TO–PEAK OUTPUT SWING — V VS = + 15V TA = 25oC 100 1 10 100 1K 10K 100K 1M 10M FREQUENCY — Hz COMMON MODE REJECTION RA TE — dB OUTPUT — mV TIME — µs VS = + 15V TA = 25oC R L = 2kΩ C L = 100pF RISE TIME Output Short–Circuit Current as a Function of Ambient Temperature Input Noise Voltage as a Function of Frequency Input Noise Current as a Function of Frequency Broadband Noise for Various Bandwidths Open–Looped Voltage Gain as a Function of Frequency Open-Looped Phase Response as a Function of Frequency Output Voltage Swing as a Function of Frequency Common–Mode Rejection Ratio as a Function of Frequency Transient Response

Philips Semiconductors Linear Products Product specification MC/SA1458/MC1558General purpose operational amplifier August 31, 1994 64 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 10 100 1K 10K 100K (VOLTAGE FOLLOWER) + 15 VOLT SUPPLIES THD < 5% V OUTPUT VOLTAGE (Vp–p)OUT FREQUENCY — Hz Power Bandwidth (Large–Signal Swing vs Frequency)