MC14001 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

/C0066/C0045/C0083/C0117/C0102/C0102/C0105/C0120 /C0083/C0101/C0114/C0105/C0101/C0115 /C0067/C0077/C0079/C0083 /C0071/C0097/C0116/C0101/C0115 The B Series logic gates are constructed with P and N channel enhancement mode devices in a single monolithic structure (Complemen- tary MOS). Their primary use is where low power dissipation and/or high noise immunity is desired.

  • Supply Voltage Range = 3.0 Vdc to 18 Vdc
  • All Outputs Buffered
  • Capable of Driving Two Low–power TTL Loads or One Low–power Schottky TTL Load Over the Rated Temperature Range.
  • Double Diode Protection on All Inputs Except: Triple Diode Protection on MC14011B and MC14081B
  • Pin–for–Pin Replacements for Corresponding CD4000 Series B Suffix Devices (Exceptions: MC14068B and MC14078B) L SUFFIX CERAMIC CASE 632

ORDERING INFORMATION

TA = – 55° to 125°C for all packages. P SUFFIX PLASTIC CASE 646 D SUFFIX SOIC CASE 751A ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ MAXIMUM RATINGS* (Voltages Referenced to VSS ) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ Value ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VDD ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ DC Supply Voltage ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 0.5 to + 18.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Vin, Vout ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ Input or Output Voltage (DC or Transient) ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 0.5 to VDD + 0.5 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ lin, lout ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ Input or Output Current (DC or Transient), per Pin ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ± 10 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ PD ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ Power Dissipation, per Package† ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ 500 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mW ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Tstg ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ Storage Temperature ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 65 to + 150 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ /C0095C ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ TL ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ Lead Temperature (8–Second Soldering) ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ 260 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ /C0095C *Maximum Ratings are those values beyond which damage to the device may occur. †Temperature Derating: Plastic “P and D/DW” Packages: – 7.0 mW//C0095C From 65/C0095C To 125/C0095C Ceramic “L” Packages: – 12 mW//C0095C From 100/C0095C To 125/C0095C This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS ≤ (Vin or Vout) ≤ VDD . Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD ). Unused outputs must be left open. /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1995 REV 3 /C0077/C0067/C0049/C0052/C0048/C0048/C0049/C0066 /C0081/C0117/C0097/C0100 /C0050/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0079/C0082 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0048/C0050/C0066 /C0068/C0117/C0097/C0108 /C0052/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0079/C0082 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0049/C0049/C0066 /C0081/C0117/C0097/C0100 /C0050/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0065/C0078/C0068 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0049/C0050/C0066 /C0068/C0117/C0097/C0108 /C0052/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0065/C0078/C0068 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0050/C0051/C0066 /C0084/C0114/C0105/C0112/C0108/C0101 /C0051/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0065/C0078/C0068 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0050/C0053/C0066 /C0084/C0114/C0105/C0112/C0108/C0101 /C0051/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0079/C0082 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0054/C0056/C0066 /C0056/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0065/C0078/C0068 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0055/C0049/C0066 /C0081/C0117/C0097/C0100 /C0050/C0045/C0073/C0110/C0112/C0117/C0116 /C0079/C0082 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0055/C0050/C0066 /C0068/C0117/C0097/C0108 /C0052/C0045/C0073/C0110/C0112/C0117/C0116 /C0079/C0082 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0055/C0051/C0066 /C0084/C0114/C0105/C0112/C0108/C0101 /C0051/C0045/C0073/C0110/C0112/C0117/C0116 /C0065/C0078/C0068 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0055/C0053/C0066 /C0084/C0114/C0105/C0112/C0108/C0101 /C0051/C0045/C0073/C0110/C0112/C0117/C0116 /C0079/C0082 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0055/C0056/C0066 /C0056/C0045/C0073/C0110/C0112/C0117/C0116 /C0078/C0079/C0082 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0056/C0049/C0066 /C0081/C0117/C0097/C0100 /C0050/C0045/C0073/C0110/C0112/C0117/C0116 /C0065/C0078/C0068 /C0071/C0097/C0116/C0101 /C0077/C0067/C0049/C0052/C0048/C0056/C0050/C0066 /C0068/C0117/C0097/C0108 /C0052/C0045/C0073/C0110/C0112/C0117/C0116 /C0065/C0078/C0068 /C0071/C0097/C0116/C0101

MOTOROLA CMOS LOGIC DATAMC14001B LOGIC DIAGRAMS

2 INPUT

3 INPUT

4 INPUT

NC = 6, 8 NC = 6, 8 NC = 6, 8 NC = 6, 8 NC = 6, 8 NC = 6, 8 VDD = PIN 14 VSS = PIN 7 FOR ALL DEVICES NOR MC14001B Quad 2–Input NOR Gate MC14025B Triple 3–Input NOR Gate MC14002B Dual 4–Input NOR Gate MC14078B 8–Input NOR Gate MC14068B 8–Input NAND Gate MC14012B Dual 4–Input NAND Gate MC14023B Triple 3–Input NAND Gate NAND MC14011B Quad 2–Input NAND Gate OR MC14071B Quad 2–Input OR Gate AND MC14081B Quad 2–Input AND Gate MC14075B Triple 3–Input OR Gate MC14073B Triple 3–Input AND Gate MC14072B Dual 4–Input OR Gate MC14082B Dual 4–Input AND Gate

NC = NO CONNECTION MC14012B Dual 4–Input NAND Gate MC14023B Triple 3–Input NAND Gate MC14001B Quad 2–Input NOR Gate MC14002B Dual 4–Input NOR Gate MC14011B Quad 2–Input NAND Gate MC14078B 8–Input NOR Gate MC14082B Dual 4–Input AND Gate MC14081B Quad 2–Input AND Gate MC14025B Triple 3–Input NOR Gate MC14068B 8–Input NAND Gate MC14071B Quad 2–Input OR Gate MC14072B Dual 4–Input OR Gate MC14073B Triple 3–Input AND Gate MC14075B Triple 3–Input OR Gate

MOTOROLA CMOS LOGIC DATAMC14001B ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (Voltages Referenced to VSS ) ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Characteristic ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ VDD Vdc ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 55/C0095C ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ 25/C0095C ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ 125/C0095C ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Unit ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Characteristic ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ VDD Vdc ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Min ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Max ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Min ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Typ # ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Max ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Min ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Max ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Unit ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Output Voltage “0” Level Vin = VDD or 0 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VOL ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.05 0.05 0.05 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.05 0.05 0.05 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.05 0.05 0.05 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ “1” Level Vin = 0 or VDD ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VOH ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 4.95 9.95 14.95 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 4.95 9.95 14.95 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 4.95 9.95 14.95 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Input Voltage “0” Level (VO = 4.5 or 0.5 Vdc) (VO = 9.0 or 1.0 Vdc) (VO = 13.5 or 1.5 Vdc) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VIL ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 1.5 3.0 4.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 2.25 4.50 6.75 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 1.5 3.0 4.0 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 1.5 3.0 4.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ “1” Level (VO = 0.5 or 4.5 Vdc) (VO = 1.0 or 9.0 Vdc) (VO = 1.5 or 13.5 Vdc) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VIH ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 3.5 7.0 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 3.5 7.0 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 2.75 5.50 8.25 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 3.5 7.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Output Drive Current (VOH = 2.5 Vdc) Source (VOH = 4.6 Vdc) (VOH = 9.5 Vdc) (VOH = 13.5 Vdc) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ IOH ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ – 3.0 – 0.64 – 1.6 – 4.2 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ – 2.4 – 0.51 – 1.3 – 3.4 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ – 4.2 – 0.88 – 2.25 – 8.8 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ – 1.7 – 0.36 – 0.9 – 2.4 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mAdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ (VOL = 0.4 Vdc) Sink (VOL = 0.5 Vdc) (VOL = 1.5 Vdc) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ IOL ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.64 1.6 4.2 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.51 1.3 3.4 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.88 2.25 8.8 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.36 0.9 2.4 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mAdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Input Current ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Iin ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ± 0.1 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ± 0.00001 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ± 0.1 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ± 1.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ µAdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Input Capacitance (Vin = 0) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ C in ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 7.5 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ pF ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Quiescent Current (Per Package) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ IDD ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.25 0.5 1.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.0005 0.0010 0.0015 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.25 0.5 1.0 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 7.5 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ µAdc ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Total Supply Current† (Dynamic plus Quiescent, Per Gate, CL = 50 pF) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ IT ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 5.0 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ IT = (0.3 µA/kHz) f + IDD /N IT = (0.6 µA/kHz) f + IDD /N IT = (0.9 µA/kHz) f + IDD /N ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ µAdc #Data labelled “Typ” is not to be used for design purposes but is intended as an indication of the IC’s potential performance. The formulas given are for the typical characteristics only at 25/C0095C. †To calculate total supply current at loads other than 50 pF: IT(CL) = IT(50 pF) + (CL – 50) Vfk where: IT is in µA (per package), CL in pF, V = (VDD – VSS ) in volts, f in kHz is input frequency, and k = 0.001 x the number of exercised gates per package.

*The formulas given are for the typical characteristics only at 25/C0095C. #Data labelled “Typ” is not to be used for design purposes but is intended as an indication of the IC’s potential performance.

  • All unused inputs of AND, NAND gates must be connected to VDD .

All unused inputs of OR, NOR gates must be connected to VSS . Figure 1. Switching Time Test Circuit and Waveforms

MOTOROLA CMOS LOGIC DATAMC14001B CIRCUIT SCHEMATIC NOR, OR GATES VSS 3, 4, 10, 11 VDD VSS VDD * Inverter omitted in MC14001B 1, 6, 8, 13 2, 5, 9, 12 9, 6, 10 VSS VDD 1, 3, 11 2, 4, 12 VSS VDD VSS VDD * Inverter omitted in MC14025B 8, 5, 13 1, 13 VSS VDD 3, 9 2, 10 VSS VDD * Inverter omitted in MC14002B SAME AS ABOVE 5, 11 4, 12 VSS VDD VSS VDD SAME AS ABOVE SAME AS ABOVE SAME AS ABOVE MC14001B, MC14071B One of Four Gates Shown MC14025B, MC14075B One of Three Gates Shown MC14002B, MC14072B One of Two Gates Shown MC14078B Eight Input Gate

NAND, AND GATES 3, 4, 10, 11 VSS VDD * Inverter omitted in MC14011B 9, 6, 10 VSS VDD * Inverter omitted in MC14023B 2, 5, 9, 12 1, 6, 8, 13 2, 4, 12 1, 3, 11 VDD VDD VSS VSS 8, 5, 13 1, 13 VSS VDD * Inverter omitted in MC14012B 2, 10 3, 9 VDD VSS SAME AS ABOVE 4, 12 5, 11 VSS VDD VSS VDD VDD VSS VDD VSS SAME AS ABOVE SAME AS ABOVE SAME AS ABOVE MC14011B, MC14081B One of Four Gates Shown MC14023B, MC14073B One of Three Gates Shown MC14012B, MC14082B One of Two Gates Shown MC14068B Eight Input Gate

MOTOROLA CMOS LOGIC DATAMC14001B OUTLINE DIMENSIONS L SUFFIX CERAMIC DIP PACKAGE CASE 632–08 ISSUE Y DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.750 0.785 19.05 19.94 B 0.245 0.280 6.23 7.11 C 0.155 0.200 3.94 5.08 D 0.015 0.020 0.39 0.50 F 0.055 0.065 1.40 1.65 G 0.100 BSC 2.54 BSC J 0.008 0.015 0.21 0.38 K 0.125 0.170 3.18 4.31 L 0.300 BSC 7.62 BSC M 0 15 0 15 N 0.020 0.040 0.51 1.01 /C0095/C0095/C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. –A– –B– C

14 PLD

K

14 PLJ

M L SBM0.25 (0.010) TSAM0.25 (0.010) T –T– SEATING PLANE 1 7 14 9 P SUFFIX PLASTIC DIP PACKAGE CASE 646–06 ISSUE L NOTES: 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. ROUNDED CORNERS OPTIONAL. 1 7 14 8 B A F H G D K C N L J M SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.715 0.770 18.16 19.56 B 0.240 0.260 6.10 6.60 C 0.145 0.185 3.69 4.69 D 0.015 0.021 0.38 0.53 F 0.040 0.070 1.02 1.78 G 0.100 BSC 2.54 BSC H 0.052 0.095 1.32 2.41 J 0.008 0.015 0.20 0.38 K 0.115 0.135 2.92 3.43 L 0.300 BSC 7.62 BSC M 0 10 0 10 N 0.015 0.039 0.39 1.01 /C0095 /C0095 /C0095 /C0095

CASE 751A–03 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. –A– –B– G P 7 PL 14 8 M0.25 (0.010) B M SBM0.25 (0.010) A ST –T– FR X 45 SEATING PLANE D 14 PL K C JM /C0095 DIM MIN MAX MIN MAX INCHESMILLIMETERS A 8.55 8.75 0.337 0.344 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 0.050 BSC J 0.19 0.25 0.008 0.009 K 0.10 0.25 0.004 0.009 M 0 7 0 7 P 5.80 6.20 0.228 0.244 R 0.25 0.50 0.010 0.019 /C0095 /C0095 /C0095 /C0095 How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. MC14001B/D /C0042/C0077/C0067/C0049/C0052/C0048/C0048/C0049/C0066/C0047/C0068/C0042