MC1320 LAMBDA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

(1) 2 mounting options : MC13 Screw mounting type MC13DIN Din rail mounting type (2) Worldwide compliance : Voltage rating 3 phase AC500V, 10, 20, 30A (3) Safe design : Terminal with cover, Low leakage current (4) Environmental compliance : Lead free soldering m Safety standard UL1283 CSA Std. C22. 2 No. 8 EN133200 m Circuit m Derating v Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. v Contact us about delivery before ordering. Temperature (°C) Current (%) EN133200 m Specifications (Note) : Value for Ta<50°C For Ta>50°C derate according to the derating curve shown on the right. Model STD type MC1306 MC1310 MC1320 MC1330 Items DIN type MC1306DIN MC1310DIN MC1320DIN MC1330DIN Rated Voltage (AC) 500V (50/60Hz) Rated Current (*1) 10A 20A 30A Test Voltage (terminals to base plate, 1min AC) 2000V (100mA) at 25°C, 70% RH Isolation Resistance (terminals to base plate, 500VDC) 100MΩmin at 25°C, 70% RH Leakage Current 500V,60Hz 5.0mA max DC Resistance (three lines) 90mΩmax 68mΩmax 23mΩmax 11mΩmax Temperature Rise 30°C max Operating Temperature -25°C ~ +85°C Operating Humidity 30% ~ 95% RH (No Dewdrop) Storage Temperature -40°C ~ +85°C Storage Humidity 10% ~ 95% RH (No Dewdrop) MC13 At no operating 10~55~10Hz, Amplitude (Sweep for 1min) 0.825mm constant (Maximum 49.0m/s2)X,Y,Z 1hour each Vibration At no operating 55~250~55Hz, Acceleration (Sweep for 1min) 19.6m/s2, X,Y,Z 1hour each MC13DIN At no operating 10~55~10Hz, Acceleration (Sweep for 1min) 9.8m/s2, X,Y,Z 1hour each Weight 600g

m MC13DIN (Unit: mm) (Unit: mm) m MC13 A B C *Mounting MC13**DIN could be mounted on 35mm wide (TS35 type) Din-rail.For mounting, put the part (A) of the unit over the top hat rail and push forward like (B), so that the rail stopper is firmly held on the Din-rail. For unmounting, put a screw driver int the part (C) and lift it up to remove the unit. *Ground Do not earth whth Din-rail. Earth directly from the ground terminal of MC13DIN. m MC13DIN explanation

m Attenuation Characteristic (typical)

m Attenuation Characteristic (typical)