MC13159 MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
/C0077/C0067/C0049/C0051/C0049/C0053/C0057 SEMICONDUCTOR TECHNICAL DATA WIDEBAND FM IF SUBSYSTEM FOR PHS AND DIGITAL
APPLICATIONS
ORDERING INFORMATION
TA = –30° to +85°C TSSOP–16 DTB SUFFIX PLASTIC PACKAGE CASE 948F (TSSOP–16) Order this document by MC13159/D MC13159DTB 1MOTOROLA ANALOG IC DEVICE DATA /C0065/C0100/C0118/C0097/C0110/C0099/C0101 /C0073/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0087/C0105/C0100/C0101/C0098/C0097/C0110/C0100 /C0070/C0077 /C0073/C0070 /C0083/C0117/C0098/C0115/C0121/C0115/C0116/C0101/C0109 The MC13159 is a wideband FM IF subsystem that is designed for high performance data and digital applications. Excellent high frequency performance is achieved, with low cost, through the use of Motorola’s RF bipolar process. The MC13159 includes a mixer, local oscillator buffer amplifier, IF amplifier, limiter amplifier and RSSI functions. The mixer is useful for a 240 MHz input used in a single–ended/balanced differential configuration. The IF and limiter amplifier are separated so that an external filter can be used in series, or connected directly with an external capacitor. The RSSI output is derived by summing the output of both the IF and Limiter sections. An enable control is provided to power down the IC for power management in battery powered applications. Suitable applications include PHS, DECT, PDC, and PCS telephones, wideband wireless data links, and other battery powered radio systems.
- Designed for PHS Applications
- 2.7 to 5.5 V Operating Voltage
- Low Drain Current: 5.5 mA (Typ)
- Wide Input Dynamic Range of Mixer (Maximum –16 dBm Input)
- Enable Function for Power Down Mode
- Over 80 dB of RSSI Dynamic Range (AC Coupling between IF Amplifier and Limiter Amplifier)
- Few External Components Required Simplified Block Diagram 16 15 14 13 12 11 10 9 Mixin VEE Mixout Enable IFin IFDec1 IFDec2 IFout Mix Decoup VCC LO in RSSI Mixer IF Amp LIM Amp RSSI 12345678 LIMoutLIMDec2 LIMDec1 LIMin Local Oscillator Buffer This device contains 164 active transistors. This document contains information on a new product. Specifications and information herein are subject to change without notice. Motorola, Inc. 1997 Rev 1
2 MOTOROLA ANALOG IC DEVICE DATA
Power Supply Voltage VS(max) 6.0 Vdc Junction Temperature TJmax 150 °C Storage Temperature Range Tstg –65 to +150 °C NOTE: ESD data available upon request. RECOMMENDED OPERATING CONDITIONS Rating Symbol Value Unit Power Supply Voltage VS 2.7 to 5.5 Vdc Input Frequency fin 10 to 600 MHz Ambient Temperature Range TA –30 to +85 °C Input Signal Level at Local Input Vin –10 dBm DC ELECTRICAL CHARACTERISTICS (TA = 25°C, VS = 3.0 V; No Input Signal) Characteristics Conditions Symbol Min Typ Max Unit Total Drain Current 1 Active Mode ICC1 4.5 5.5 7.5 mA Total Drain Current 2 Disable Mode ICC2 – 0.1 10 µA AC ELECTRICAL CHARACTERISTICS Characteristics Conditions Symbol Min Typ Max Unit MIXER (TA = 25°C; VS = 3.0; fRF = 240 MHz, fLO = 229.3 MHz) Mixer Conversion Gain 50 Ω Termination Input Matched – 11 dB Noise Figure Input Matched NF – 14 – dB Mixer Input Impedance Single–Ended Rp Cp 400 4.0 Ω pF Mixer Output Impendance – – – 330 – Ω 1.0 dB Gain Compression @Mix in Vicp – –16 – dBm 3rd Order Input Intercept 50 Ω Termination IIP3 – –8.0 – dBm IF AMPLIFIER SECTION (TA = 25°C; VS = 3.0 V; fIF = 10.7 MHz) IF Gain f = 10.7 MHz – 32 36 45 dB Input Impedance – – – 330 – Ω Output Impedance – – – 330 – Ω LIMITING AMPLIFIER SECTION (TA = 25°C; VS = 3.0 V; fIF = 10.7 MHz) Limiter Gain f = 10.7 MHz – – 70 – dB Input Impedance – – – 330 – Ω Output Swing – – 400 500 600 /C0109/C0086/C0112/C0112 Output Rise Time – – – 10 – /C0110/C0115 Output Fall Time – – – 20 – /C0110/C0115 RSSI SECTION (TA= 25°C; VS = 3.0 V; fIF = 10.7 MHz) RSSI Slope – – 10 14 18 mV/dB RSSI Output DC Voltage 1 No Input Signal – 0.8 0.9 1.0 /C0086 RSSI Output DC Voltage 2 VIF = –85 dBm – 0.82 0.95 1.02 /C0086 RSSI Output DC Voltage 3 VIF = –80 dBm – 0.85 1.0 1.15 /C0086 RSSI Output DC Voltage 4 VIF = –40 dBm – 1.4 1.5 1.6 /C0086 RSSI Output DC Voltage 5 Vin = 0 dBm – 1.95 2.1 2.25 /C0086
Figure 1. Test Circuit
10.7 MHz
240 MHz
229.3 MHz
4 MOTOROLA ANALOG IC DEVICE DATA
Figure 2. Test Circuit for Evaluation
10.8 MHz
248.5 MHz
0.5 Vpp
Text boards are for the TSSOP package and socket.
- CF2: Murata CFEC10.8ME1 (dual
237.7 MHz
5MOTOROLA ANALOG IC DEVICE DATA PIN FUNCTION DESCRIPTION Pin Symbol Internal Equivalent Circuit Description
1 Mix Decoup
1.0 k 1.0 k VCC Mixer Decoupling Mixer decoupling pin. 220 pF is decoupled to the RF ground. This pin also can be used for differential input with Mixin.
16 Mixin 16 1 Mixer Input
Input impedance is about 400 Ω at 240 MHz. Single–ended matching section at 240 MHz is referenced at application circuit.
2 VCC Supply Voltage
Supply voltage range range is from 2.7 Vdc to 5.5 Vdc. 1.0 nF of decoupling capacitor is placed directly at this pin to reduce the floor noise.
3 LO in
1.0 k VCC Local Oscillator Input Connected to external local oscillator. Input impedance is about 900 Ω at 230 MHz.
4 RSSI
The RSSI current creates a voltage drop across an internal 15 kΩ resistor. LIMDec2 LIMDec1 VCC VCC VCC VCC Limiter Decoupling Limiter decoupling pins. Decoupling capacitors are connected to the RF ground, and one is placed between Dec1 and Dec2 330 between D ec1 and D ec2.
8 LIMin 7
330 Limiter Input
The input impedance is 330 Ω ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter.
6 LIMout
800 µA VCC VCC Limiter Output The output level is about 0.5 Vpp.
6 MOTOROLA ANALOG IC DEVICE DATA
PIN FUNCTION DESCRIPTION (continued) Pin DescriptionInternal Equivalent CircuitSymbol
9 IFout
300 µA VCC VCC IF Output The output impedance is 330 Ω ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter. IFDec2 IFDec1 VCC VCC VCC VCC IF Decoupling IF decoupling pins. Decoupling capacitor is connected from Dec1 to the RF ground, and one is placed between Dec1 and Dec2 1112 330 between Dec1 and Dec2.
12 IFin
330 IF Input
The input impedance is 330 Ω ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter.
13 Enable VCC
The IC regulators are enabled by placing this pin at VEE .
14 Mixout
700 µA 220 6.0 k VCC Mixer Output The mixer output impedance is 330 Ω ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter.
15 VEE Supply Ground
7MOTOROLA ANALOG IC DEVICE DATA DTB SUFFIX PLASTIC PACKAGE CASE 948F–01 (TSSOP–16) ISSUE O OUTLINE DIMENSIONS ÇÇÇ ÇÇÇ DIM MIN MAX MIN MAX INCHESMILLIMETERS A 4.90 5.10 0.193 0.200 B 4.30 4.50 0.169 0.177 D 0.05 0.15 0.002 0.006 F 0.50 0.75 0.020 0.030 G 0.65 BSC 0.026 BSC H 0.18 0.28 0.007 0.011 J 0.09 0.20 0.004 0.008 J1 0.09 0.16 0.004 0.006 K 0.19 0.30 0.007 0.012 K1 0.19 0.25 0.007 0.010 L 6.40 BSC 0.252 BSC M 0 8 0 8 NOTES:
1 DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982. 2 CONTROLLING DIMENSION: MILLIMETER. 3 DIMENSION A DOES NOT INCLUDE MOLD FLASH. PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE.
4 DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE.
5 DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION.
6 TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7 DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE –W–. /C0095/C0095/C0095/C0095 SECTION N–N SEATING PLANE IDENT. PIN 1 1 8 16 9 DETAIL E J B C D A K H G ÉÉÉ ÉÉÉ DETAIL E F M L 2X L/2 –U– SU0.15 (0.006)T SU0.15 (0.006)T SUM0.10 (0.004) V ST 0.10 (0.004) –T– –V– –W– 0.25 (0.010) 16X REFK N N
8 MOTOROLA ANALOG IC DEVICE DATA
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://www.mot.com/SPS/ MC13159/D