MC13001X MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

/C0077/C0067/C0049/C0051/C0048/C0048/C0049/C0088 /C0077/C0067/C0049/C0051/C0048/C0048/C0055/C0088 SEMICONDUCTOR TECHNICAL DATA MONOMAX BLACK AND WHITE TV SUBSYSTEM

ORDERING INFORMATION

TA = 0° to +70°C Plastic DIP Order this document by MC13001X/D P SUFFIX PLASTIC PACKAGE CASE 710 1MOTOROLA ANALOG IC DEVICE DATA /C0077/C0111/C0110/C0111/C0109/C0097/C0120 /C0066/C0108/C0097/C0099/C0107 /C0097/C0110/C0100 /C0087/C0104/C0105/C0116/C0101 /C0084/C0086 /C0083/C0117/C0098/C0115/C0121/C0115/C0116/C0101/C0109 The MONOMAX is a single chip IC that will perform the electronic functions of a monochrome TV receiver, with the exception of the tuner, sound channel, and p owe r output stages. The M C13001X P a nd MC13007XP will function as a drop–in replacement for the MC13001P and MC13007P , but some external IF components can be removed for maximum benefit. IF AGC range has been increased, video output impedance lowered, and horizontal driver output current capability increased.

  • Full Performance Monochrome Receiver with Noise and Video Processing (Black Level Clamp, DC Contrast, Beam Limiter)
  • Video IF Detection On–Chip (No Coils, No Pins, except Inputs)
  • Noise Filtering On–Chip (Minimum Pins and Externals)
  • Oscillator Components On–Chip (No Precision Capacitors Required)
  • MC13001XP for 525 Line NTSC and MC13007XP for 625 Line CCIR
  • Low Dissipation in All Circuit Sections
  • High Performance Vertical Countdown
  • 2–Loop Horizontal System with Low Power Startup Mode
  • Noise Protected Sync and Gated AGC System
  • Designed to work with TDA1190P or TDA3190P Sound IF and Audio Output Devices

Figure 1. Basic Elements of the System

2 MOTOROLA ANALOG IC DEVICE DATA

MAXIMUM RATINGS (TA = 25°C, unless otherwise noted.) Rating Symbol Value Unit Power Supply Voltage – Pin 18 VCC +16 Vdc Power Dissipation PD 1.0 W Horizontal Driver Current – Pin 17 Ihor –20 mA RF AGC Current – Pin 11 IRFAGC 20 mA Video Detector Current – Pin 24 IVID 5.0 mA Vertical Driver Current – Pin 22 Ivert 5.0 mA Auxiliary Regulator Current – Pin 19 Ireg 35 mA Thermal Resistance Junction–to–Case R θJC 60 °C/W Maximum Junction T emperature TJ 150 °C Storage Temperature Range Tstg –65 to + 150 °C Operating T emperature Range TA 0° to + 70 °C RECOMMENDED OPERATING CONDITIONS Rating Symbol Value Unit Horizontal Output Drive Current Ihor ≤10 mA RF AGC Current IRFAGC ≤10 mA Regulator Current Ireg ≤20 mA ELECTRICAL CHARACTERISTICS (VCC = 11.3 V, TA = 25°C) Characteristics Symbol Min Typ Max Unit Power Supply Current (Pins 18, 19) ICC 44 – 76 mA Regulator Voltage (Pin 19) Vreg 7.2 8.2 8.8 Vdc HORIZONTAL SPECIFICATIONS Oscillator Frequency (Nominal) (Pin 12) fhor(NOM) 13 – 19 kHz Oscillator Sensitivity – 230 – Hz/µA Startup Frequency (I18 = 4.0 mA) fhor –10 – +10 % Oscillator Temperature Stability (0 ≤ TA ≤ 75°C) – – 50 – Hz Phase Detector 1 (Charge/Discharge Current) (Non–Standard Frame) (Standard Frame) Iφ1 ±900 ±400 µA Phase Detector 2 (Charge/Discharge Current) Vφ2 – +1.0 –0.6 – mA Phase Detector 1 (Output Voltage Limits) Vφ1 – 7.5 (max) 2.5 (min) – Vdc Phase Detector 2 (Output Voltage Limits) Vφ1 – 7.7 (max) 1.5 (min) Phase Detector 1 (Leakage Current) – – 2.0 µA Phase Detector 2 (Leakage Current) – – 3.0 Horizontal Delay Range (Sync to Flyback) 18 (max) 5.0 (min) µs Horizontal Output Saturation Voltage (I17 = 15 mA) V17(sat) – – 0.3 Vdc Phase–Detector 1 (Gain Constant) (Out–of–Lock) (In–Lock) 5.0 µA/µs Horizontal Pull–In Range ±500 ±750 – Hz

Figure 2. Monomax AGC Characteristics Figure 3. Video Output Response

4 MOTOROLA ANALOG IC DEVICE DATA

4.5 MHz

2.66 MHz

Figure 4. Detector Products

45.74 MHz = 25 mVrms

41.25 MHz = Relative to

Figure 5. Pin 28 Sound Output Figure 6. Pin 24 Video Output anti–lockout circuit connected to the sync separator at Pin 7. the noise cancelled sync for gating.

6 MOTOROLA ANALOG IC DEVICE DATA

230 Hz/µA, a high value resistor can be used (680 kΩ ) which

can be a raw flyback pulse simply fed via a suitable resistor. is permitted to reset is controlled by the window control.

10 Stage Counter Counter Reset

Figure 9. Monomax Vertical Countdown

respective window if a sync pulse has not appeared.

1.0 V pp

Figure 10. Vertical Waveforms defection–derived supply system.

12 V Supply

8.2 V to

Figure 11. Power Supply Circuit

8 MOTOROLA ANALOG IC DEVICE DATA

Figure 12. Test Circuit Diagram

See Application Note AN879 for further information. /C0123for extra performance with low signal strength.

0.47 F µ

Figure 13. Simplified Application

10 MOTOROLA ANALOG IC DEVICE DATA

CASE 710–02 ISSUE C OUTLINE DIMENSIONS NOTES: 1. POSITIONAL TOLERANCE OF LEADS (D), SHALL BE WITHIN 0.25 (0.010) AT MAXIMUM MATERIAL CONDITION, IN RELATION TO SEATING PLANE AND EACH OTHER. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. SEATING PLANE M A B K C N FG D H J L DIM MIN MAX MIN MAX INCHESMILLIMETERS A 36.45 37.21 1.435 1.465 B 13.72 14.22 0.540 0.560 C 3.94 5.08 0.155 0.200 D 0.36 0.56 0.014 0.022 F 1.02 1.52 0.040 0.060 G 2.54 BSC 0.100 BSC H 1.65 2.16 0.065 0.085 J 0.20 0.38 0.008 0.015 K 2.92 3.43 0.115 0.135 L 15.24 BSC 0.600 BSC M 0 15 0 15 N 0.51 1.02 0.020 0.040 /C0095 /C0095/C0095 /C0095 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 MC13001X/D /C0042/C0077/C0067/C0049/C0051/C0048/C0048/C0049/C0088/C0047/C0068/C0042