MC12066 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

/C0077/C0067/C0049/C0050/C0048/C0054/C0054 SEMICONDUCTOR TECHNICAL DATA MECL PLL COMPONENTS ÷64/256 PRESCALER

ORDERING INFORMATION

MC12066D T A = –40° to +85°C SO–8 PIN CONNECTIONS Order this document by MC12066/D D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) VCC (Top View) 8NC IN IN Gnd OUT OUT SEL /C0049/C0046/C0051 /C0071/C0072/C0122 /C0080/C0114/C0101/C0115/C0099/C0097/C0108/C0101/C0114 The MC12066 is a selectable divide by 64/256 prescaler. Typical frequency synthesis applications include electronically tuned TV/CATV and communication systems as well as instrumentation. The MC12066 is pin and functionally compatible to the Plessey SP4666, but with significantly lower power consumption. An internal, two stage preamplifier is included which isolates the differential inputs and provides gain for the input signal. Differential outputs are provided. The MC12066 contains an internal low pass filter to reduce harmonic content to a low level. The filter bandwidth is selectable depending on the state of the SEL pin. The typical –3.0 dB bandwidth is 4.3 MHz for ÷256 mode, and 17.2 MHz for ÷64 mode. Figures 2 and 3 illustrate typical device performance.

  • 1.3 GHz Toggle Frequency
  • Operating Supply Voltage of 2.7 to 5.5 V
  • Low–Power 7.5 mA Typical at VCC = 5.0 V
  • High Input Sensitivity, 5 mVrms Max at VCC = 2.7 to 5.5, TA = –40 to 85°C
  • 600 mV Minimum Peak–to–Peak Output Swing
  • Differential Outputs TRUTH TABLE SEL Prescaler L H 256 MAXIMUM RATINGS Characteristic Symbol Range Unit Power Supply Voltage VCC 7.0 Vdc Operating Temperature Range TA –40 to 85 °C Storage Temperature Range Tstg –65 to 175 °C NOTE: ESD data available upon request. ELECTRICAL CHARACTERISTICS (VCC = 2.7 to 5.5 V; TA = –40 to 85°C, unless otherwise noted.) Characteristic Symbol Min Typ1 Max Unit Toggle Frequency (Sine Wave Input) fmax 2 fmin 1.3 1.6 GHz MHz Supply Current at 5.5 V ICC – 7.5 12 mA Output Voltage (Load =12 pF) Vout 0.6 1.0 – Vpp Input Voltage Sensitivity 50–200 MHz 200–1300 MHz Vin min 2.5 0.5 mVrms Input Overload Vin max 200 400 – mVrms Input HIGH Voltage (SEL) VIH 0.7VCC – – V Input LOW Voltage (SEL) VIL – – 0.3VCC V NOTES: 1. Typical measured at 25°C, 5.0 V 2. See Figure 2  Motorola, Inc. 1997 Rev 2

2 MOTOROLA RF/IF DEVICE DATA

Figure 1. Prescaler Block Diagram

5 SEL

Figure 2. Typical Input Signal Amplitude and Output Peak–to–Peak Amplitude versus Input Frequency

4 MOTOROLA RF/IF DEVICE DATA

CASE 751–06 (SO–8) ISSUE T SEATING PLANE A0.25 M CB SS

0.25 M B M

h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.19 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10 OUTLINE DIMENSIONS Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 4–32–1 Nishi–Gotanda, Shagawa–ku, Tokyo, Japan. 03–5487–8488 Customer Focus Center: 1–800–521–6274 Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE : http://motorola.com/sps/ MC12066/D