MC12053A MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 /C0077/C0067/C0049/C0050/C0048/C0053/C0051/C0065 Order this document by MC12053A/D SEMICONDUCTOR TECHNICAL DATA MECL PLL COMPONENTS ÷64/65, ÷128/129 LOW POWER DUAL MODULUS PRESCALER WITH STAND–BY MODE PIN CONNECTIONS D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) IN (Top View) 8IN VCC SW OUT SB MC Gnd Device Operating Temp Range Package

ORDERING INFORMATION

MC12053AD TA = –40 to 85°C SO–8 1MOTOROLA RF/IF DEVICE DATA /C0049/C0046/C0049 /C0071/C0072/C0122 /C0083/C0117/C0112/C0101/C0114 /C0076/C0111/C0119 /C0080/C0111/C0119/C0101/C0114 /C0068/C0117/C0097/C0108 /C0077/C0111/C0100/C0117/C0108/C0117/C0115 /C0080/C0114/C0101/C0115/C0099/C0097/C0108/C0101/C0114 /C0087/C0105/C0116/C0104 /C0083/C0116/C0097/C0110/C0100/C0045/C0066/C0121 /C0077/C0111/C0100/C0101 The MC12053A is a super low power ÷64/65, ÷128/129 dual modulus prescaler. Motorola’s advanced Bipolar MOSAIC V technology is utilized to achieve low power dissipation of 4.3 mW at a minimum supply voltage of 2.7 V. The Divide Ratio Control input, SW, permits selection of divide ratio as desired. A HIGH on SW selects ÷64/65; an OPEN on SW selects ÷128/129. The Modulus Control input, MC, selects the proper divide number after SW has been biased to select the desired divide ratio. Stand–by mode is featured to reduce current drain to 50 µA typical at 2.7 V when the stand–by pin, SB, is switched LOW, disabling the prescaler. On–chip output termination provides 500 µA (typical) output current, which is sufficient to drive a CMOS synthesizer input high impedance load (8.0 pF typical).

  • 1.1 GHz Toggle Frequency
  • Supply Voltage of 2.7 to 5.5 V
  • Low Power 1.5 mA Typical at VCC = 2.7 V
  • Operating Temperature Range of –40 to 85°C
  • On–Chip Output Termination
  • The MC12053A Is Pin and Functionally Compatible With the MC12036
  • Modulus Control Input Level Is Compatible With Standard CMOS and TTL MOSAIC V is a trademark of Motorola FUNCTIONAL TABLE SW MC Divide Ratio H H 64 H L 65 L H 128 L L 129 NOTES: 1. SW: H = VCC – 0.5 to VCC , L = Open. A logic L can also be applied by grounding this pin, but this is not recommended due to increased power consumption. 2. MC & SB: H = 2.0 V to VCC , L = Gnd to 0.8 V. MAXIMUM RATINGS Characteristic Symbol Range Unit Power Supply Voltage, Pin 2 VCC –0.5 to 7.0 Vdc Operating Temperature Range TA –40 to 85 °C Storage Temperature Range Tstg –65 to 150 °C Modulus Control Input, Pin 6 MC –0.5 to VCC Vdc Maximum Output Current, Pin 4 IO 4.0 mA NOTE: ESD data available upon request.  Motorola, Inc. 1998 Rev 5 ARCHIVE INFORMATION ARCHIVE INFORMATION Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

2 MOTOROLA RF/IF DEVICE DATA

NOTE: Assumes 8.0 pF high impedance load. Figure 1. Logic Diagram (MC12053A) Figure 2. Modulus Setup Time setup or MC release plus the prop delay. Figure 3. AC Test Circuit Freescale Semiconductor, Inc.

4 MOTOROLA RF/IF DEVICE DATA

Figure 6. Typical Input Impedance versus Input Frequency Freescale Semiconductor, Inc.

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 MC12053A 5MOTOROLA RF/IF DEVICE DATA D SUFFIX PLASTIC PACKAGE CASE 751–06 (SO–8) ISSUE T SEATING PLANE 5 8 A0.25 M CB SS

0.25 M B M

h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.19 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095 /C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10 OUTLINE DIMENSIONS Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. – http://sps.motorola.com/mfax/ 852–26629298 HOME PAGE : http://motorola.com/sps/ MC12053A/D ARCHIVE INFORMATION ARCHIVE INFORMATION Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...