MC12033A MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
/C0077/C0067/C0049/C0050/C0048/C0051/C0051/C0065 /C0077/C0067/C0049/C0050/C0048/C0051/C0051/C0066 Order this document by MC12033A/D SEMICONDUCTOR TECHNICAL DATA MECL PLL COMPONENTS ÷32/33, ÷64/65 LOW VOLTAGE DUAL MODULUS PRESCALER P SUFFIX PLASTIC PACKAGE CASE 626 PIN CONNECTIONS D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) IN (Top View) 8IN VCC SW OUT NC MC Gnd Device Operating Temp Range Package
ORDERING INFORMATION
TA = –40° to +85°C SO–8 Plastic MC12033BD MC12033BP SO–8 Plastic /C0050/C0046/C0048 /C0071/C0072/C0122 /C0076/C0111/C0119 /C0086/C0111/C0108/C0116/C0097/C0103/C0101 /C0068/C0117/C0097/C0108 /C0077/C0111/C0100/C0117/C0108/C0117/C0115 /C0080/C0114/C0101/C0115/C0099/C0097/C0108/C0101/C0114 The MC12033 is a high frequency low voltage dual modulus prescaler used in phase–locked loop (PLL) applications. A high frequency input signal up to 2.0 GHz is provided for cordless and cellular communication services such as DECT, PHS, and PCS. The MC12033 can be operated down to a minimum supply voltage of 2.7 V required for battery operated portable systems. The MC12033A can be used with CMOS synthesizer requiring positive edges to trigger internal counters such as Motorola’s MC145XXX series in a PLL to provide tuning signal up to 2.0 GHz in programmable frequency steps. The MC12033B can be used with CMOS synthesizers requiring negative edges to trigger internal counters. A Divide Ratio Control (SW) permits selection of a 32/33 or 64/65 divide ratio as desired. The Modulus Control (MC) selects the proper divide number after SW has been biased to select the desired divide ratio. NOTE: The “B” Version Is Not Recommended for New Designs
- 2.0 GHz Toggle Frequency
- Supply Voltage 2.7 V to 5.0 Vdc
- Low Power 10.0 mA Typical at VCC = 2.7 V
- Operating Temperature Range of –40 to 85°C
- The MC12033 is Pin Compatible With the MC12022
- Short Setup Time (tset) 8ns Typical at 2.0 GHz
- Modulus Control Input Level Is Compatible With Standard CMOS and TTL FUNCTIONAL TABLE SW MC Divide Ratio H H 32 H L 33 L H 64 L L 65 NOTES: 1. SW: H = VCC , L = Open. A logic L can also be applied by grouunding this pin, but this is not recommended due to increased power soncumption. 2. MC: H = 2.0 V to VCC , L = GND to 0.8 V. MAXIMUM RATINGS Parameter Symbol Value Unit Power Supply Voltage, Pin 2 VCC –0.5 to 7.0 Vdc Operating Temperature Range TA –40 to 85 °C Storage Temperature Range Tstg –65 to 150 °C Modulus Control Input, Pin 6 MC –0.5 to 6.5 Vdc Maximum Output Current, Pin 4 IO 10.0 mA NOTE: ESD data available upon request. Motorola, Inc. 1997 Rev 3
2 MOTOROLA RF/IF DEVICE DATA
- Divide ratio of ÷32/33 @ 2.0 GHz
setup or MC release plus the prop delay. Figure 1. Logic Diagram (MC12033A) Figure 2. Modulus Setup Time Figure 3. AC Test Circuit
4 MOTOROLA RF/IF DEVICE DATA
CASE 626–05 ISSUE K D SUFFIX PLASTIC PACKAGE CASE 751–06 (SO–8) ISSUE T NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. F NOTE 2 –A– –B– –T– SEATING PLANE H J G D K N C L M MAM0.13 (0.005) B MT DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.40 10.16 0.370 0.400 B 6.10 6.60 0.240 0.260 C 3.94 4.45 0.155 0.175 D 0.38 0.51 0.015 0.020 F 1.02 1.78 0.040 0.070 G 2.54 BSC 0.100 BSC H 0.76 1.27 0.030 0.050 J 0.20 0.30 0.008 0.012 K 2.92 3.43 0.115 0.135 L 7.62 BSC 0.300 BSC N 0.76 1.01 0.030 0.040 /C0095/C0095 SEATING PLANE A0.25 M CB SS
0.25 M B M
h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.19 0.25 D 4.80 5.00 E
1.27 BSCe
3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10 OUTLINE DIMENSIONS Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 4–32–1 Nishi–Gotanda, Shagawa–ku, Tokyo, Japan. 03–5487–8488 Customer Focus Center: 1–800–521–6274 Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE : http://motorola.com/sps/ MC12033A/D