MC12026A ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • 1.1 GHz Toggle Frequency
  • Supply V oltage 4.5 to 5.5 V
  • Low Power 4.0 mA Typical
  • Operating Temperature Range of –40 to 85°C
  • The MC12026 is Pin Compatible with the MC12022
  • Short Setup Time (tset ) 6.0 ns Typical @ 1.1 GHz
  • Modulus Control Input Level is Compatible with Standard CMOS and TTL FUNCTIONAL TABLE SW MC Divide Ratio H H 8 H L 9 L H 16 L L 17 1. SW: H = VCC , L = Open. A logic L can also be applied by grounding this pin, but this is not recommended due to increased power consumption. 2. MC: H = 2.0 V to VCC , L = GND to 0.8 V. MAXIMUM RATINGS Characteristics Symbol Value Unit Power Supply Voltage, Pin 2 VCC –0.5 to 7.0 Vdc Operating Temperature Range TA –40 to 85 °C Storage Temperature Range Tstg –65 to 150 °C Modulus Control Input, Pin 6 MC –0.5 to 6.5 Vdc Maximum Output Current, Pin 4 IO 10.0 mA NOTE: ESD data available upon request. http://onsemi.com SO–8 D SUFFIX CASE 751 PIN CONNECTIONS Device Package Shipping

ORDERING INFORMATION

MC12026AD SO–8 98 Units/Rail MC12026ADR2 SO–8 2500 Tape & Reel (Top View) IN8IN VCC SW OUT NC MC Gnd See general marking information in the device marking section on page 6 of this data sheet. DEVICE MARKING INFORMATION

Figure 6. Typical Output Waveform

Figure 7. Typical Input Impedance versus Input Frequency

http://onsemi.com SO–8 D SUFFIX CASE 751 MARKING DIAGRAMS A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week ALYW 026A ALYW 026B

http://onsemi.com PACKAGE DIMENSIONS SO–8 D SUFFIX CASE 751–07 ISSUE W SEATING PLANE N J X 45 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. A B S DH C 0.10 (0.004) DIM A MIN MAX MIN MAX INCHES 4.80 5.00 0.189 0.197 MILLIMETERS B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.33 0.51 0.013 0.020 G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0 8 0 8 N 0.25 0.50 0.010 0.020 S 5.80 6.20 0.228 0.244 –X– –Y– G MYM0.25 (0.010) –Z– YM0.25 (0.010) Z S X S M

http://onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION JAPAN : ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone : 81–3–5740–2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. MC12026A/D Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800–282–9855 Toll Free USA/Canada