ML12015 LANSDALE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

www.lansdale.comPage 1 of 4 Issue A ML12015 ML12016 ML12017 Dual Modulus Prescaler Legacy Device: Motorola MC12015, MC12016, MC12017 The ML12015, ML12016 and ML12017 are dual modu- lus prescalers which will drive divide by 32 and 33, 40 and 41, and 64 and 65, respectively. An internal regulator is provided to allow these devices to be used over a wide range of power–supply voltages. The devices may be oper- ated by applying a supply voltage of 5.0 Vdc ±10% at Pin 7, or by applying an unregulated voltage source from 5.5 Vdc to 9.5 Vdc to Pin 8.

  • 225 MHz Toggle Frequency
  • Low–Power 7.5 mA Maximum at 6.8 V
  • Control Input and Output Are Compatible With Standard CMOS
  • Connecting Pins 2 and 3 Allows Driving One TTL Load
  • Supply V oltage 4.5 V to 9.5 V
  • Operating Temperature Range TA = –40 to 85°C SIMPLIFIED BLOCK DIAGRAM 0.1µF VCC Voltage Regulator N / N+1 0.1µF Vreg 4 GND 0.001µF Signal GND 0.001µFSignal Input

2 Active

  1. V reg at Pin 7 is not guaranteed to be between 4.5 and 5.5V when VCC is being applied to Pin 8 2. Pin 7 is not to be used as a source of regulated output voltage P-DIP 8 SO 8 SO 8 SO 8 P-DIP 8 P-DIP 8 MC12015P MC12015D MC12016D MC12017D MC12016P MC12017P ML12015PP ML12015-5P ML12016-5P ML12017-5P ML12016PP ML12017PP Note: Lansdale lead free ( Pb) product, as it becomes available, will be identified by a part number prefix change from ML to MLE. MECL PLL COMPONENTS SEMICONDUCTOR TECHNICAL DATA

LANSDALE Semiconductor, Inc.ML12015, ML12016, ML12017 www.lansdale.comPage 2 of 4 Issue A SymbolRating MAXIMUM RATINGS Value Unit Regulated Voltage, Pin 7 Vreg 8.0 Vdc Power Supply Voltage, Pin 8 VCC 10 Vdc Operating Temperature Range TA –40 to +85 °C Storage Temperature Range Tstg –65 to +175 °C Characteristic Symbol Min Typ Max Unit Toggle Frequency (Sine Wave Input) fmax 225 – – MHz fmin – – 35 Supply Current ICC – 6.0 7.8 mA Control Input HIGH (÷32, 40 or 64) VIH 2.0 – – V Control Input LOW (÷33, 41 or 65) VIL – – 0.8 V Output Voltage HIGH (Isource = 50µA) [Nofe 1] VOH 2.5 – – V Output Voltage LOW (Isink = 2mA) [Note 1] VOL – – 0.5 V Input Voltage Sensitivity Vin mVpp

35 MHz 400 – 800

50 to 225 MHz 200 – 800 PLL Response Time [Notes 2 and 3] tPLL – – tout to 70 ns NOTES: 1. Pin 2 connected to Pin 3. 2. tPLL = the period of time the PLL has from the prescaler rising output tranistion (50%) to the modulus control input edge transition (50%) to ensure proper modulus selection. 3. tout = period of output waveform.

www.lansdale.comPage 4 of 4 Issue A SO 8 = -5P PLASTIC P (ML12015-5P , ML12016-5P , ML12017-5P) ACKAGE CASE 751-06 (SO–8) ISSUE T OUTLINE DIMENSIONS SEATING PLANE A0.25 M CB SS

0.25 M B M

h C θ X 45° L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.19 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h L 0.40 1.25 0.25 0.50 NOTES: 1. DIMENSIONING AND T OLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOW ABLE DAMBAR PROTRUSION SHALL BE 0.127 T OTAL IN EXCESS OF THE B DIMENSION A T MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10 Lansdale Semiconductor reserves the right to make changes without further notice to any products herein to improve relia bili- ty, function or design. Lansdale does not assume any lia bility arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. “Typical” parameters which may be provided in Lansdale data sheets and/or specifications can vary in different applications, and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by the customer’s technical experts. Lansdale Semiconductor is a registered trademark of Lansdale Semiconductor, Inc. P DIP 8 = PP PLASTIC PACKAGE (ML12015PP , ML12016PP , ML12017PP) CASE 626-04 LANSDALE Semiconductor, Inc.ML12015, ML12016, ML12017