MC112 WINSEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
（Model: MC112 /MC112C/MC112D） Manual Version: 1.3 Valid from: 2014-05-01 Zhengzhou Winsen Electronics Technology Co., Ltd
This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the sensor, we shall not be responsible for the loss. The specific such as color, appearance, sizes &etc, please in kind prevail. We are devoting ourselves to products development and technical innovation, so we reserve the right to improve the products without notice. Please confirm it is the valid version before using this manual. At the same time, users’ comments on optimized using way are welcome. Please keep the manual properly, in order to get help if you have questions during the usage in the future. Zhengzhou Winsen Electronics Techn ology CO., LTD
Zhengzhou Winsen Electronics Technology Co.,Ltd TEL: +86-371-67169097/ 67169670 Email:sales@winsensor.com MC112 /MC112C/MC112D Catalytic Flammable Gas Sensor Profile MC112 / MC112C/ MC112D adopts catalytic combustion principle, and its two arms of electric bridge consists of a test element and a compensate element. The resistance of the test element rises once it meets the combustible gases, in the same time, the output voltage of the bridge changes and the voltage variation rises in direct proportion to the gas concentration. The compensate element, as a conference, has the function of compensating temperature and humidity.
Features
It has good sensitivity to methane in wide range, and has advantages such as long lifespan, low cost and simple drive circuit &etc. The bridge output is linear, quick response, good repeatability and selectivity, good stability, excellent resistance to the interference of H2S gas and organosilicone. Main Applications It is widely used in industrial occasion to detect the concentration of natural gas, LPG, CO and alkanes. It is also used in combustible gas leakage alarm system, combustible gas detector and gas concentration meter and so on. Fig1. Sensor Structure Fig2. Basic Test Circuit
Zhengzhou Winsen Electronics Technology Co.,Ltd TEL: +86-371-67169097/ 67169670 Email:sales@winsensor.com Technical Parameters Model MC112 / MC112C/MC112D Sensor Type Catalytic Standard Encapsulation Metal, Metallurgy powder mesh Working voltage(V) 3.0±0.1 Working current(mA) MC112: 105±10; MC112C: 100±10; MC112D: 150±10 Sensitivity (mV) 1% CH4 MC112: 20 to 40; MC112C/MC112D: 15 to 35 1% C3H8 MC112: 30 to 60; MC112C/MC112D: 30 to 55 Linearity ≤5% Measuring range(%LEL) 0 to 100 Response Time (90%) ≤10s Recovery Time (90%) ≤30s Working Environment -40 to +70℃, less than 95%RH Storage Environment -20 to +70℃, less than 95%RH Size (mm) MC112 /MC112D: 19×9.5×14; MC112C: 14×8×10 Anti-explosion Mark ExdibⅠ Sensitivity, response and recovery Fig3. Sensitivity Curve Fig4. Response and recovery curve Changing of output signal at different temperature Fig5. Zero point at different temp. Fig6. Sensitivity at different temp. Temp. Characteristic Temp. Characteristic
Zhengzhou Winsen Electronics Technology Co.,Ltd TEL: +86-371-67169097/ 67169670 Email:sales@winsensor.com Changing of output signal at different humidity Changing of output signal with different voltage supplying Long-term Stability The drift in air per year is within ±2mV, in 1%CH4 is within ±2mV. For a short period storage (in 2 weeks), the sensor need be galvanical continuously for 8 hours to reach stability. For more than one year storage, it need more than 48 hours. Fig7.Zero point at different humidity Fig8. Sensitivity at different humidity Fig10. Sensitivity with different voltage Fig11.Zero and Sensitivity fluctuation Output(mV) Output(mV) Output(mV) In Air In 1% CH4 gas Time (weeks) Humidity Characteristic Humidity Characteristic Humidity Humidity In Air In 1%CH4 Temp. ℃ Temp. ℃ Fig9. Zero point with different voltage
Zhengzhou Winsen Electronics Technology Co.,Ltd TEL: +86-371-67169097/ 67169670 Email:sales@winsensor.com Cautions 1. Following conditions must be prohibited
1.1 Exposed to organic silicon steam
Sensing material will lose sensitivity and never recover if the sensor absorbs organic silicon steam. Sensors must avoid exposing to silicon bond, fixature, silicon latex, putty or plastic contain silicon environment.
1.2 High Corrosive gas
If the sensors are exposed to high concentration corrosive gas (such as H 2S, SOX, Cl2, HCl et c.), it will not only result in corrosion of sensors structure, also it cause sincere sensitivity attenuation.
1.3 Alkali, Alkali metals salt, halogen pollution
The sensors performance will be changed badly if sensors be sprayed polluted by alkali metals salt especially brine, or be exposed to halogen such as fluorine.
1.4 Touch water
Sensitivity of the sensors will be reduced when spattered or dipped in water.
1.5 Freezing
Do avoid icing on sensor’s surface, otherwise sensing material will be broken and lost sensitivity.
1.6 Applied higher voltage
Applied voltage on sensor should not be higher than stipulated value, even if the sensor is not physically damaged or broken, it causes down-line or heater damaged, and bring on sensors’ sensitivity characteristic changed badly.
1.7 Pins connection
When the sensor is connecting to the circuit, one of detection part pins and one of compensation part pins connects as the signal output. The other one of detection part pins connects negative electrode while the other one of compensation part pins connects positive electrode. The part with “■” mark is the detection part( for the separate type sensor, the one part with bigger top hole is detector part),the other part is the compensation part. 2. Following conditions must be avoided
2.1 Water Condensation
Indoor conditions, slight water condensation will influence sensors’ performance lightly. However, if water condensation on sensors surface and keep a certain period, sensors’ sensitive will be decreased.
2.2 Used in high gas concentration
No matter the sensor is electrified or not, if it is placed in high gas concentration for long time, se nsors characteristic will be affected. If lighter gas sprays the sensor, it will cause extremely damage.
2.3 Long time storage
The sensors resistance will drift reversibly if it’s stored for long t ime without electrify, this drift is related with storage conditions. Sensors should be stored in airproof bag without volatile silicon compound. For the sensors with long time storage but no electrify, they need long galvanical aging time for stability before using. The suggested aging time is 24 hours at least if the storage time is more than half an year.
2.4 Long time exposed to adverse environment
No matter the sensors electrified or not, if exposed to adverse environment for long time, such as high humidity, high temperature, or high pollution etc., it will influence the sensors’ performance badly.
2.5 Vibration
Continual vibration will result in sensors down -lead response then break. In transportation or assembling line, pneumatic screwdriver/ultrasonic welding machine can lead this vibration.
2.6 Concussion
If sensors meet strong concussion, it may lead its lead wire disconnected.
2.7 Usage Conditions
2.7.1 For sensor, handmade welding is optimal way. The welding conditions as follow:
Zhengzhou Winsen Electronics Technology Co.,Ltd TEL: +86-371-67169097/ 67169670 Email:sales@winsensor.com Soldering flux: Rosin soldering flux contains least chlorine Homothermal soldering iron Temperature： 250℃ Time：less than 3 seconds
2.7.2 If users choose wave-soldering, the following conditions should be obey
Soldering flux: Rosin soldering flux contains least chlorine Speed: 1-2 meter per minute Warm-up temperature：100±20℃ Welding temperature：250±10℃ One time pass wave crest welding machine If disobey the above using terms, sensors sensitivity will be reduced. Zhengzhou Winsen Electronics Technology Co., Ltd Add: No.299, Jinsuo Road, National Hi-Tech Zone, Zhengzhou 450001 China Tel: +86-371-67169097 / 67169670 Fax: +86-371-60932988 E-mail: sales@winsensor.com Website: www.winsentech.com