MC10E158_16 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
- 600 ps Max. D to Output
- 800 ps Max. SEL to Output
- Differential Outputs
- One VCCO Pin Per Output Pair
- PECL Mode Operating Range: ♦ VCC = 4.2 V to 5.7 V with VEE = 0 V
- NECL Mode Operating Range: ♦ VCC = 0 V with VEE = −4.2 V to −5.7 V
- Internal Input 50 k/C0087 Pulldown Resistors
- ESD Protection: ♦ Human Body Model; > 2 kV ♦ Machine Model; > 200 V
- Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test
- Moisture Sensitivity Level: 3 (Pb-Free) ♦ For Additional Information, see Application Note AND8003/D
- Flammability Rating: ♦ UL 94 V−0 @ 0.125 in, Oxygen Index: 28 to 34
- Transistor Count = 126 devices
- These Devices are Pb-Free, Halogen Free and are RoHS Compliant MARKING DIAGRAM* xxx = 10 or 100 A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week G = Pb-Free Package PLCC−28 FN SUFFIX CASE 776−02 MCxxxE158FNG AWLYYWW www.onsemi.com †For information on tape and reel specifications, in- cluding part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D *For additional marking information, refer to
ORDERING INFORMATION
Device Package Shipping † MC10E158FNG PLCC−28 (Pb-Free)
37 Units/Tube
MC10E158FNR2G PLCC−28 (Pb-Free) 500/T ape & Reel PLCC−28 (Pb-Free) MC100E158FNG 37 Units/Tube
Figure 2. Logic Diagram
1 Pinout: 28-Lead PLCC
- All VCC and VCCO pins are tied together on the die.
Figure 1. 28-Lead Pinout connected to Power Supply to guarantee proper operation. Table 1. PIN DESCRIPTION Table 2. Logic Diagram
Table 3. MAXIMUM RATINGS should not be assumed, damage may occur and reliability may be affected. Table 4. 10E SERIES PECL DC CHARACTERISTICS (VCC = 5.0 V, VEE = 0.0 V (Note 1)) values are applied individually under normal operating conditions and not valid simultaneously.
- Input and output parameters vary 1:1 with V
- Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.
Table 5. 10E SERIES NECL DC CHARACTERISTICS (VCCx = 0.0 V; V EE = −5.0 V (Note 1)) values are applied individually under normal operating conditions and not valid simultaneously.
- Input and output parameters vary 1:1 with V
- Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.
Table 6. 100E SERIES PECL DC CHARACTERISTICS (VCCx = 5.0 V; VEE = 0.0 V (Note 1)) values are applied individually under normal operating conditions and not valid simultaneously.
- Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.
Table 7. 100E SERIES NECL DC CHARACTERISTICS (VCCx = 0 V; VEE = −5.0 V (Note 1)) values are applied individually under normal operating conditions and not valid simultaneously.
- Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.
values are applied individually under normal operating conditions and not valid simultaneously.
- Within-device skew is defined as identical transitions on similar paths through a device.
Figure 3. Typical Termination for Output Driver and Device Evaluation
MC10E158, MC100E158 www.onsemi.com PACKAGE DIMENSIONS
28 LEAD PLLC
CASE 776−02 ISSUE F −N− −M−−L− V W D D Y BRK 28 1 VIEW S SL-M S0.010 (0.250) N ST SL-M M0.007 (0.180) N ST 0.004 (0.100) G J C Z R E A SEATING PLANE SL-M M0.007 (0.180) N ST −T− B SL-M S0.010 (0.250) N ST SL-M M0.007 (0.180) N STU SL-M M0.007 (0.180) N ST Z G1X VIEW D−D SL-M M0.007 (0.180) N ST VIEW S H K F SL-M M0.007 (0.180) N ST NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635). DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.485 0.495 12.32 12.57 B 0.485 0.495 12.32 12.57 C 0.165 0.180 4.20 4.57 E 0.090 0.110 2.29 2.79 F 0.013 0.021 0.33 0.53 G 0.050 BSC 1.27 BSC H 0.026 0.032 0.66 0.81 R 0.450 0.456 11.43 11.58 U 0.450 0.456 11.43 11.58 V 0.042 0.048 1.07 1.21 W 0.042 0.048 1.07 1.21 X 0.042 0.056 1.07 1.42 Z 2 10 2 10 G1 0.410 0.430 10.42 10.92 /C0095/C0095/C0095/C0095
MC10E158, MC100E158 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 MC10E158/D ECLinPS is a registered trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative