MC10E116_06 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • 500 ps Max. Propagation Delay
  • VBB Supply Output
  • Dedicated VCCO Pin for Each Receiver
  • PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V
  • NECL Mode Operating Range: VCC = 0 V with VEE = −4.2 V to −5.7 V
  • Output Qs will default low when inputs are < VCC −2.5 V
  • Internal Input 50 k/C0087 Pulldown Resistors
  • Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
  • ESD Protection: Human Body Model; > 2 kV , Machine Model; > 200 V
  • Moisture Sensitivity Level: Pb = 1 Pb−Free = 3 For Additional Information, see Application Note AND8003/D
  • Flammability Rating: UL 94 V−0 @ 0.125 in, Oxygen Index: 28 to 34
  • Transistor Count = 98 devices
  • Pb−Free Packages are Available* *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. MARKING DIAGRAM* xxx = 10 or 100 A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week G= P b −Free Package PLCC−28 FN SUFFIX CASE 776 MCxxxE116G AWLYYWW http://onsemi.com *For additional marking information, refer to See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet.

ORDERING INFORMATION

1 Pinout: 28-Lead PLCC

  • All VCC and VCCO pins are tied together on the die.

connected to Power Supply to guarantee proper operation. Figure 1. Pinout Assignment Figure 2. Logic Diagram Table 1. PIN DESCRIPTION VBB Reference Voltage Output. Table 2. MAXIMUM RATINGS

Table 3. 10E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V, VEE = 0.0 V (Note 1) values are applied individually under normal operating conditions and not valid simultaneously.

  1. Input and output parameters vary 1:1 with V
  2. Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.
  3. V IHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.

Table 4. 10E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; V EE = −5.0 V (Note 4) values are applied individually under normal operating conditions and not valid simultaneously.

  1. Input and output parameters vary 1:1 with V
  2. Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.
  3. V IHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.

Table 5. 100E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V, VEE = 0.0 V (Note 7) values are applied individually under normal operating conditions and not valid simultaneously.

  1. Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.
  2. V IHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.

Table 6. 100E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; V EE = −5.0 V (Note 10) values are applied individually under normal operating conditions and not valid simultaneously.

  1. Outputs are terminated through a 50 /C0087 resistor to VCC − 2.0 V.

12.VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC.

values are applied individually under normal operating conditions and not valid simultaneously.

13.10 Series: V

14.Within-device skew is defined as identical transitions on similar paths through a device. Figure 3. Typical Termination for Output Driver and Device Evaluation

MC10E116, MC100E116 http://onsemi.com Device Package Shipping† MC10E116FN PLCC−28 37 Units / Rail MC10E116FNG PLCC−28 (Pb−Free)

37 Units / Rail

MC10E116FNR2 PLCC−28 500 / Tape & Reel MC10E116FNR2G PLCC−28 (Pb−Free) 500 / Tape & Reel MC100E116FN PLCC−28 37 Units / Rail MC100E116FNG PLCC−28 (Pb−Free) MC100E116FNR2 PLCC−28 500 / Tape & Reel MC100E116FNR2G PLCC−28 (Pb−Free) 500 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Resource Reference of Application Notes AN1405/D − ECL Clock Distribution Techniques AN1406/D − Designing with PECL (ECL at +5.0 V) AN1503/D − ECLinPS/C0116 I/O SPiCE Modeling Kit AN1504/D − Metastability and the ECLinPS Family AN1568/D − Interfacing Between LVDS and ECL AN1672/D − The ECL Translator Guide AND8001/D − Odd Number Counters Design AND8002/D − Marking and Date Codes AND8020/D − Termination of ECL Logic Devices AND8066/D − Interfacing with ECLinPS AND8090/D − AC Characteristics of ECL Devices

MC10E116, MC100E116 http://onsemi.com PACKAGE DIMENSIONS PLCC−28 FN SUFFIX PLASTIC PLCC PACKAGE CASE 776−02 ISSUE E −N− −M−−L− V W D D Y BRK 28 1 VIEW S SL−M S0.010 (0.250) N ST SL−M M0.007 (0.180) N ST 0.004 (0.100) G J C Z R E A SEATING PLANE SL−M M0.007 (0.180) N ST −T− B SL−M S0.010 (0.250) N ST SL−M M0.007 (0.180) N STU SL−M M0.007 (0.180) N ST Z G1X VIEW D−D SL−M M0.007 (0.180) N ST VIEW S H K F SL−M M0.007 (0.180) N ST NOTES: 1. DATUMS −L−, −M−, AND −N− DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM −T−, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635). DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.485 0.495 12.32 12.57 B 0.485 0.495 12.32 12.57 C 0.165 0.180 4.20 4.57 E 0.090 0.110 2.29 2.79 F 0.013 0.019 0.33 0.48 G 0.050 BSC 1.27 BSC H 0.026 0.032 0.66 0.81 R 0.450 0.456 11.43 11.58 U 0.450 0.456 11.43 11.58 V 0.042 0.048 1.07 1.21 W 0.042 0.048 1.07 1.21 X 0.042 0.056 1.07 1.42 Z 2 10 2 10 G1 0.410 0.430 10.42 10.92 /C0095/C0095/C0095/C0095

MC10E116, MC100E116 http://onsemi.com ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 MC10E116/D ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC). LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative