MC100E101

MC10E101 MOTOROLA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

/C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA 2–1 REV 2 Motorola, Inc. 1996 /C0081/C0117/C0097/C0100 /C0052/C0262/C0073/C0110/C0112/C0117/C0116 /C0079/C0082/C0047/C0078/C0079/C0082 /C0071/C0097/C0116/C0101 The MC10E/100E101 is a quad 4-input OR/NOR gate.

• 500ps Max. Propagation Delay
• Extended 100E VEE Range of – 4.2V to – 5.46V
• 75kΩ Input Pulldown Resistors PIN NAMES Pin Function D 0a – D3d Data Inputs Q 0 – Q3 True Outputs Q 0 – Q3 Inverting Outputs /C0077/C0067/C0049/C0048/C0069/C0049/C0048/C0049 /C0077/C0067/C0049/C0048/C0048/C0069/C0049/C0048/C0049 QUAD 4-INPUT OR/NOR GATE FN SUFFIX PLASTIC PACKAGE CASE 776-02 Pinout: 28-Lead PLCC (Top View) VCCOD 0aD 0bD 0cD 0dD 1aD 1b VCCO D 2d D 2c D 2b VEE D 2a D 1d D 1c 25 24 23 22 21 20 19 116 7 8 9 10 D 3a D 3b D 3c D 3d Q 3 Q 3 Q 2 Q 2 VCC Q 1 Q 1 Q 0 Q 0 D 0a D 0b D 0c D 0d D 1a D 1b D 1c D 1d D 2a D 2b D 2c D 2d D 3a D 3b D 3c D 3d Q 0 Q 0 Q 1 Q 1 Q 2 Q 2 Q 3 Q 3 LOGIC DIAGRAM * All VCC and VCCO pins are tied together on the die.

MOTOROLA ECLinPS and ECLinPS Lite DL140 — Rev 4 2–2 DC CHARACTERISTICS (VEE = VEE (min) to VEE (max); VCC = VCCO = GND) 0°C 25°C 85°C Symbol Characteristic min typ max min typ max min typ max Unit Condition IIH Input HIGH Current 150 150 150 µA IEE Power Supply Current mA 10E 30 36 30 36 30 36 100E 30 36 30 36 35 42 AC CHARACTERISTICS (VEE = VEE (min) to VEE (max); VCC = VCCO = GND) 0°C 25°C 85°C Symbol Characteristic min typ max min typ max min typ max Unit Condition tPLH Propagation Delay to Output ps tPHL D to Q 200 350 500 200 350 500 200 350 500 tSKEW Within-Device Skew 50 50 50 ps 1 tSKEW Within-Gate Skew 25 25 25 2 tr Rise/Fall Time ps tf 20 - 80% 300 380 575 300 380 575 300 380 575 1. Within-device skew is defined as identical transitions on similar paths through a device. 2. Within-gate skew is defined as the variation in propagation delays of a gate when driven from its different inputs.

2–3 MOTOROLAECLinPS and ECLinPS Lite DL140 — Rev 4 OUTLINE DIMENSIONS FN SUFFIX PLASTIC PLCC PACKAGE CASE 776–02 ISSUE D 0.007 (0.180) T L –M S N SM 0.007 (0.180) T L –M S N SM 0.007 (0.180) T L –M S N SM 0.010 (0.250) T L –M S N SS 0.007 (0.180) T L –M S N SM 0.010 (0.250) T L –M S N SS 0.007 (0.180) T L –M S N SM 0.007 (0.180) T L –M S N SM 0.004 (0.100) SEATING PLANE -T- 12.32 12.32 4.20 2.29 0.33 0.66 0.51 0.64 11.43 11.43 1.07 1.07 1.07 10.42 1.02 12.57 12.57 4.57 2.79 0.48 0.81 11.58 11.58 1.21 1.21 1.42 0.50 10° 10.92

1.27 BSC

A B C E F G H J K R U V W X Y Z MIN MIN MAX MAX INCHES MILLIMETERS DIM NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIM G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIM R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635). VIEW S B U Z G1X VIEW D-D H K F VIEW S G C Z A R E J 0.485 0.485 0.165 0.090 0.013 0.026 0.020 0.025 0.450 0.450 0.042 0.042 0.042 0.410 0.040 0.495 0.495 0.180 0.110 0.019 0.032 0.456 0.456 0.048 0.048 0.056 0.020 10° 0.430

0.050 BSC

-N- Y BRK D DW -M--L- 28 1 V

MOTOROLA ECLinPS and ECLinPS Lite DL140 — Rev 4 2–4 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 MC10E101/D /C0042/C0077/C0067/C0049/C0048/C0069/C0049/C0048/C0049/C0047/C0068/C0042