MC100 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
April, 2016 3M™ Scotch-Weld™ Metal Instant Adhesive MC100 Product Description 3M™ Scotch-Weld™ Metal Instant Adhesives are designed to give optimum performance and high strength bonds on metals, including galvanized or anodized surfaces. Product Features
- 3M™ Scotch-Weld™ Metal Instant Adhesive MC100 is a low viscosity cyanoacrylate designed for metals bonding but which can also bond plastics, rubbers and other common substrates.
3M™ Scotch-Weld™ Metal Instant Adhesive MC100 Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Uncured Physical Properties Property Values Notes Color Clear Colors may vary from nearly white to yellow/amber. Adhesive performance is not aected by color variation. Viscosity 70 to 110 cP Cone-Plate viscosity, CP75 at 3000/s shear rate Base Ethyl Typical Mixed Physical Properties Property Values Substrate Notes Test Condition Time to Handling Strength <30 s EPDM Rubber Time to handling is substrate dependent. Time to Full Cure 24 h Room Temperature Gap Fill 0.006 in Percent of Initial Strength Test Condition 100 % Room Temperature 84 % @ 167°F 69 % @ 212°F 22 % @ 257°F Property: Percent of Initial Strength Typical Performance Characteristics Temperature Use Range: -60 to 180 °F Typical Physical Properties Property Values Specic Gravity 1.06 g/mL Appearance Liquid
3M™ Scotch-Weld™ Metal Instant Adhesive MC100 Handling/Application Information Directions for Use Surface Preparation For optimum strength structural bonds, paint, oxide lms, oils, dust, mold release agents, and all other surface contaminants must be completely removed. However, the amount of surface preparation depends on the required bond strength and the environmental aging resistance desired by the user. Typical quick surface preparation would include wiping with a clean solvent (such as isopropyl alcohol*), abrading the surface with a clean ne abrasive, and then wiping again with a clean solvent to remove loose particles. *Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use. Cured Bond Characteristics Storage and Shelf Life For short term storage (<30 days), keep adhesive in a cool (60°F to 80°F [16°C to 27°C]), dry place out of direct sunlight. Keep containers tightly covered and free of moisture. Refrigeration (40°F [4°C]) gives optimum long term storage stability. 3M™ Scotch-Weld™ Metal Instant Adhesives can be expected to have a shelf life of 15 months from date of manufacture when stored under refrigerated conditions. Trademarks 3M and Scotch-Weld are trademarks of 3M Company. References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Scotch-Weld-Metal-Instant-Adhesive-MC100?N=5002385+3293241411&rt=rud Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=MC100 This product was manufactured under a quality system registered to ISO 9001 standards.
3M™ Scotch-Weld™ Metal Instant Adhesive MC100 Precautionary Information Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501. Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.