MC0402N220F500CT

MC0603X104K250CT MULTICOMP | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 26

Technical content

Features

• A wide selection of sizes is available (0201 to 1812).
• High capacitance in given case size.
• Capacitor with lead-free termination (pure Tin).

Applications

• For general digital circuit.
• For power supply bypass capacitors.
• For consumer electronics.
• For telecommunication.

Page <2> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Size Inch (mm) L (mm) W (mm) T (mm)/Symbol Soldering Method * MB min (mm) 1206 (3216) 0.80±0.10 B R / W 0.6 ±0.2 (0.5 ±0.25)*** 0.95±0.10 C R 1.25±0.10 D R 1.15±0.15 J R 3.2 ±0.2 1.6 ±0.2

19 G R

0.85 ±0.1 T R / W 3.2 +0.3/-0.1 1210 (3225) 3.2 ±0.3 2.5 ±0.2 0.95 ±0.1 C R 0.75 ±0.25 0.85 ±0.1 T R 1.25 ±0.1 D R 3.2 ±0.4 2.5 ±0.3 1.6 ±0.2 G R 2 ±0.2 K R 2.5 ±0.3 M R 1812 (4532) 4.5 ±0.4 (4.5+0.5/-0.3) 3.2 ±0.3 1.25 ±0.1 D R 0.75 ±0.25 (0.5 ±0.25)* 1.6 ±0.2 J R 2 ±0.20 K R 3.2 ±0.4 2.5 ±0.3 M R 2.8 ±0.3 U R * R = Reflow soldering process ; W = Wave soldering process. For 1808/1812/1825_200V~4000V and safety certificated products. * For 1206_≥1000V, 1808/1812_200V~4000V and safety certificated products. #1: For 0603/Cap≥10μF or 0603(≤6.3V)/Cap≥4.7μF or 0603(>10V)/Cap>1μF products, Excluding 0603X225(16V&25V),0603S225(6.3V&16V),0603X475(6.3V&16V),0603S475(4V&6.3V). #2: For 0201/ 0.1uF < Cap < 0.68uF products, Excluding 0201X334~474(≤6.3V) & 0201X224(≤10V). #4: For 1210(200V&250V)/Cap>0.47μF products. #5: For 1206(100V)/Cap≥1.2μF products. General Electrical Data: Dielectric NP0 X7R X5R Size 0402, 0603, 0805, 1206, 1210, 1812 Capacitance range* 0.1pF to 0.1μF 100pF to 47μF 100pF to 220μF Capacitance tolerance** Cap≤5pF#1: A(±0.05pF),B(±0.1pF), C (±0.25pF) 5pF<Cap<10pF: C(±0.25pF),D(±0.5pF) Cap≥10pF: F (±1%), G (±2%), J (±5%), K (±10%) J (±5%), K (±10%), M (±20%) K (±10%), M (±20%) Rated voltage (WVDC) 10V, 16V, 25V, 50V,100V 4V, 6.3V, 10V, 16V, 25V, 50V, 100V

Page <3> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Capacitance Range Capacitance #1: NP0, 0.1pF product only provide B tolerance; 0603N0R3/0R4 provide B&C tolerance. * Measured at the condition of 30~70% related humidity. temperature X7R/X6S/X5R/X7S: Please refer to page 13 “Reliability test conditions and requirements” for detail. Y5V: Apply 1.0±0.2Vrms, 1.0kHz±10%, at 20°C ambient temperature. ** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour and then leave i n ambient condition for 24±2 hours before measurement. Dielectric NP0 X7R X5R Operating temperature -55 to +125°C -55 to +85°C Capacitance characteristic ±30ppm ±15% Termination Ni/Sn (lead-free termination) Dielectric NPO Size 0402 0603 0805 Rated Voltage (V DC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 0.1pF (0R1) N N N N 0.2pF (0R2) N N N N 0.3pF (0R3) N N N N S S S S 0.4pF (0R4) N N N N S S S S 0.5pF (0R5) N N N N N S S S S S A A A A A 0.6pF (0R6) N N N N N S S S S S A A A A A 0.7pF (0R7) N N N N N S S S S S A A A A A 0.8pF (0R8) N N N N N S S S S S A A A A A 0.9pF (0R9) N N N N N S S S S S A A A A A 1.0pF (1R0) N N N N N S S S S S A A A A A 1.2pF (1R2) N N N N N S S S S S A A A A A 1.5pF (1R5) N N N N N S S S S S A A A A A 1.8pF (1R8) N N N N N S S S S S A A A A A 2.0pF (2R0) N N N N N S S S S S A A A A A 2.2pF (2R2) N N N N N S S S S S A A A A A 2.7pF (2R7) N N N N N S S S S S A A A A A 3.0pF (3R0) N N N N N S S S S S A A A A A 3.3pF (3R3) N N N N N S S S S S A A A A A 3.9pF (3R9) N N N N N S S S S S A A A A A

Page <4> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Dielectric NPO Size 0402 0603 0805 Rated Voltage (V DC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 4.0pF (4R0) N N N N N S S S S S A A A A A 4.7pF (4R7) N N N N N S S S S S A A A A A 5.0pF (5R0) N N N N N S S S S S A A A A A 5.6pF (5R6) N N N N N S S S S S A A A A A 6.0pF (6R0) N N N N N S S S S S A A A A A 6.8pF (6R8) N N N N N S S S S S A A A A A 7.0pF (7R0) N N N N N S S S S S A A A A A 8.0pF (8R0) N N N N N S S S S S A A A A A 8.2pF (8R2) N N N N N S S S S S A A A A A 9.0pF (9R0) N N N N N S S S S S A A A A A 10pF (100) N N N N N S S S S S A A A A A 12pF (120) N N N N N S S S S S A A A A A 15pF (150) N N N N N S S S S S A A A A A 18pF (180) N N N N N S S S S S A A A A A 22pF (220) N N N N N S S S S S A A A A A 27pF (270) N N N N N S S S S S A A A A A 33pF (330) N N N N N S S S S S A A A A A 39pF (390) N N N N N S S S S S A A A A A 47pF (470) N N N N N S S S S S A A A A A 56pF (560) N N N N N S S S S S A A A A A 68pF (680) N N N N N S S S S S A A A A A 82pF (820) N N N N N S S S S S A A A A A 100pF (101) N N N N N S S S S S A A A A A 120pF (121) N N N N N S S S S S A A A A A 150pF (151) N N N N N S S S S S A A A A A 180pF (181) N N N N N S S S S S A A A A A 220pF (221) N N N N N S S S S S A A A A A 270pF (271) N N N N S S S S S A A A A A 330pF (331) N N N N S S S S S A A A A A 390pF (391) N N N N S S S S S B B B B B 470pF (471) N N N N S S S S S B B B B B 560pF (561) N N N N S S S S S B B B B B 680pF (681) N N N N S S S S S B B B B B 820pF (821) N N N N S S S S S B B B B B 1,000pF (102) N N N N S S S S S B B B B B 1,200pF (122) X X X X X B B B B B

Page <5> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Dielectric NPO Size 0402 0603 0805 Rated Voltage (V DC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 1,500pF (152) X X X X X B B B B B 1,800pF (182) X X X X X B B B B B 2,200pF (222) X X X X X B B B B B 2,700pF (272) X X X X X D D D D D 3,300pF (332) X X X X X D D D D D 3,900pF (392) X X X X X D D D D D 4,700pF (472) X X X X X D D D D D 5,600pF (562) X X X X X D D D D D 6,800pF (682) X X X X X D D D D D 8,200pF (822) X X X X X D D D D D 0.010uF (103) X X X X X D D D D D 0.012uF (123) D D D D D 0.015uF (153) D D D D D 0.018uF (183) D D D D D 0.022uF (223) D D D D D 1. The letter in cell is expressed the symbol of product thickness. 2. The letter in cell with “ * ” mark is expressed capacitance tolerance “J” (±5%) only.

Page <6> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Capacitance NP0 Dielectric 1206 Size Dielectric NP0 Size 1206 1210 Rated Voltage (V DC) 10 16 25 50 100 10 16 25 50 100 16 25 50 100 1.0pF (1R0) 1.2pF (1R2) B B B B B 1.5pF (1R5) B B B B B 1.8pF (1R8) B B B B B 2.2pF (2R2) B B B B B 2.7pF (2R7) B B B B B 3.3pF (3R3) B B B B B 3.9pF (3R9) B B B B B 4.7pF (4R7) B B B B B 5.6pF (5R6) B B B B B 6.8pF (6R8) B B B B B 8.2pF (8R2) B B B B B 10pF (100) B B B B B C C C C C D D D D 12pF (120) B B B B B C C C C C D D D D 15pF (150) B B B B B C C C C C D D D D 18pF (180) B B B B B C C C C C D D D D 22pF (220) B B B B B C C C C C D D D D 27pF (270) B B B B B C C C C C D D D D 33pF (330) B B B B B C C C C C D D D D 39pF (390) B B B B B C C C C C D D D D 47pF (470) B B B B B C C C C C D D D D 56pF (560) B B B B B C C C C C D D D D 68pF (680) B B B B B C C C C C D D D D 82pF (820) B B B B B C C C C C D D D D 100pF (101) B B B B B C C C C C D D D D 120pF (121) B B B B B C C C C C D D D D 150pF (151) B B B B B C C C C C D D D D 180pF (181) B B B B B C C C C C D D D D 220pF (221) B B B B B C C C C C D D D D 270pF (271) B B B B B C C C C C D D D D 330pF (331) B B B B B C C C C C D D D D 390pF (391) B B B B B C C C C C D D D D 470pF (471) B B B B B C C C C C D D D D 560pF (561) B B B B B C C C C C D D D D 680pF (681) B B B B B C C C C C D D D D 820pF (821) B B B B B C C C C C D D D D

Page <7> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Capacitance Dielectric NP0 Size 1206 1210 Rated Voltage (V DC) 10 16 25 50 100 10 16 25 50 100 16 25 50 100 1,000pF (102) B B B B B C C C C C D D D D 1,200pF (122) B B B B B C C C C C D D D D 1,500pF (152) B B B B B C C C C C D D D D 1,800pF (182) B B B B B C C C C C D D D D 2,200pF (222) B B B B B C C C C C D D D D 2,700pF (272) B B B B B C C C C C D D D D 3,300pF (332) B B B B B C C C C C D D D D 3,900pF (392) B B B B B C C C C C D D D D 4,700pF (472) B B B B B C C C C C D D D D 5,600pF (562) B B B B B C C C C C D D D D 6,800pF (682) C C C C C C C C C C D D D D 8,200pF (822) D D D D D C C C C C D D D D 0.010µF (103) D D D D D C C C C C D D D D 0.012µF (123) P P P P P D D D D D D D D D 0.015µF (153) P P P P P D D D D D D D D D 0.018µF (183) P P P P P K K K K K D D D D 0.022µF (223) P P P P P K K K K K D D D D 0.027µF (273) P P P P K K K K K D D D D 0.033µF (333) P P P P K K K K K D D D D 0.039µF (393) P P P P K K K K K D D D D 0.047µF (473) P P P P K K K K K D D D D 0.056µF (563) P P P P M M M M 0.068µF (683) P P P P M M M M 0.082µF (823) P P P P M M M M 0.1µF (104) P P P P M M M M 1. The letter in cell is expressed the symbol of product thickness. 2. The letter in cell with “ * ” mark is expressed capacitance tolerance “J” (±5%) only.

Page <8> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Capacitance X7R Dielectric 0402, 0603, 0805 Sizes Dielectric SIZE 0402 0603 0805 Rated Voltage (VDC) 10 16 25 50 100 6.3 10 16 25 50 100 6.3 10 16 25 35 50 100 100pF (101) N N N N N S S S S S B B B B B 120pF (121) N N N N N S S S S S B B B B B 150pF (151) N N N N N S S S S S B B B B B 180pF (181) N N N N N S S S S S B B B B B 220pF (221) N N N N N S S S S S B B B B B 270pF (271) N N N N N S S S S S B B B B B 330pF (331) N N N N N S S S S S B B B B B 390pF (391) N N N N N S S S S S B B B B B 470pF (471) N N N N N S S S S S B B B B B 560pF (561) N N N N N S S S S S B B B B B 680pF (681) N N N N N S S S S S B B B B B 820pF (821) N N N N N S S S S S B B B B B 1,000pF (102) N N N N N S S S S S B B B B B 1,200pF (122) N N N N N S S S S S B B B B B 1,500pF (152) N N N N N S S S S S B B B B B 1,800pF (182) N N N N N S S S S S B B B B B 2,200pF (222) N N N N N S S S S S B B B B B 2,700pF (272) N N N N N S S S S S B B B B B 3,300pF (332) N N N N N S S S S S B B B B B 3,900pF (392) N N N N N S S S S S B B B B B 4,700pF (472) N N N N N S S S S S B B B B B 5,600pF (562) N N N N S S S S S B B B B B 6,800pF (682) N N N N S S S S S B B B B B 8,200pF (822) N N N N S S S S S B B B B B 0.010µF (103) N N N N S S S S S B B B B B 0.012µF (123) N N N N S S S S X B B B B B 0.015µF (153) N N N N S S S S X B B B B B 0.018µF (183) N N N N S S S S X B B B B B 0.022µF (223) N N N N S S S S X B B B B B 0.027µF (273) N N N N S S S S X B B B B D 0.033µF (333) N N N N S S S X X B B B B D 0.039µF (393) N N N N S S S X X B B B B D 0.047µF (473) N N N N S S S X X B B B B D 0.056µF (563) N N N E S S S X X B B B B D 0.068µF (683) N N N E S S S X X B B B B D 0.082µF (823) N N N E S S S X X B B B B D

Page <9> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 1. The letter in cell is expressed the symbol of product thickness. 2. The letter in cell with “ * ” mark is expressed product not in 10% (code “K”) tolerance. Capacitance Dielectric SIZE 0402 0603 0805 Rated Voltage (VDC) 10 16 25 50 100 6.3 10 16 25 50 100 6.3 10 16 25 35 50 100 0.10µF (104) N N N N E S S S X X B B B B D 0.12µF (124) S S X B B B B I 0.15µF (154) N S S X X D D D D I 0.18µF (184) S S X D D D D I 0.22µF (224) N N N N S S X X D D D D I 0.27µF (274) X X X X D D D I I 0.33µF (334) N N X X X X X D D D I I 0.39µF (394) X X X X D D D I I 0.47µF (474) N N X X X X X D D D I I 0.56µF (564) X X X D D D 0.68µF (684) X X X D D D I 0.82µF (824) X X X D D D 1.0µF (105) N X X X X X D D D I I 1.5µF (155) I I I 2.2µF (225) X X X I I I I I I 3.3µF (335) 4.7µF (475) X I I I I 6.8µF (685) 10µF (106) I I I* 22µF (226)

Page <10> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro X7R Dielectric 1206 Size Dielectric X7R Size 1206 1210 1812 Rated Voltage (VDC) 10 16 25 35 50 100 10 16 25 50 100 10 16 25 50 100 100pF (101) 120pF (121) 150pF (151) B B B B B 180pF (181) B B B B B 220pF (221) B B B B B 270pF (271) B B B B B 330pF (331) B B B B B 390pF (391) B B B B B 470pF (471) B B B B B 560pF (561) B B B B B 680pF (681) B B B B B 820pF (821) B B B B B 1,000pF (102) B B B B B C C C C C D D D D D 1,200pF (122) B B B B B C C C C C D D D D D 1,500pF (152) B B B B B C C C C C D D D D D 1,800pF (182) B B B B B C C C C C D D D D D 2,200pF (222) B B B B B C C C C C D D D D D 2,700pF (272) B B B B B C C C C C D D D D D 3,300pF (332) B B B B B C C C C C D D D D D 3,900pF (392) B B B B B C C C C C D D D D D 4,700pF (472) B B B B B C C C C C D D D D D 5,600pF (562) B B B B B C C C C C D D D D D 6,800pF (682) B B B B B C C C C C D D D D D 8,200pF (822) B B B B B C C C C C D D D D D 0.010µF (103) B B B B B C C C C C D D D D D 0.012µF (123) B B B B B C C C C C D D D D D 0.015µF (153) B B B B B C C C C C D D D D D 0.018µF (183) B B B B B C C C C C D D D D D 0.022µF (223) B B B B B C C C C C D D D D D 0.027µF (273) B B B B B C C C C C D D D D D 0.033µF (333) B B B B B C C C C C D D D D D 0.039µF (393) B B B B B C C C C C D D D D D 0.047µF (473) B B B B B C C C C C D D D D D 0.056µF (563) B B B B B C C C C C D D D D D 0.068µF (683) B B B B B C C C C C D D D D D 0.082µF (823) B B B B D C C C C C D D D D D Capacitance

Page <11> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Dielectric X7R Size 1206 1210 1812 Rated Voltage (VDC) 10 16 25 35 50 100 10 16 25 50 100 10 16 25 50 100 0.10µF (104) B B B B C C C C C C D D D D D 0.12µF (124) B B B B D C C C C C D D D D D 0.15µF (154) C C C C G C C C C C D D D D D 0.18µF (184) C C C C G C C C C C D D D D D 0.22µF (224) C C C C G C C C C D D D D D D 0.27µF (274) C C C D G C C C C G D D D D D 0.33µF (334) C C C D G C C C D G D D D D D 0.39µF (394) C C J P G C C C D M D D D D D 0.47µF (474) J J J P G C C C D M D D D D K 0.56µF (564) J J J P P D D D D M D D D D K 0.68µF (684) J J J P P D D D D K D D D K K 0.82µF (824) J J J P P D D D D K D D D K K 1.0µF (105) J J J P P D D D D K D D D K K 1.5µF (155) J J P G G M M D K K 2.2µF (225) J J P P P G G M M G M M 3.3µF (335) P P P G G M K K 4.7µF (475) P P P P K K K M M M M 6.8µF (685) M M 10µF (106) P P P P K K K M M M 22µF (226) P P* M M M 47µF (476) M 100µF (107) Capacitance 1. The letter in cell is expressed the symbol of product thickness. 2. The letter in cell with “ * ” mark is expressed product not in 10% (code “K”) tolerance.

Page <12> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro X5R Dielectric 0402, 0603, 0805, 1206, 1210 Sizes Dielectric X5R Size 0402 0603 Rated Voltage (VDC) 4 6.3 10 16 25 50 4 6.3 10 16 25 50 100pF (101) 150pF (151) 220pF (221) 330pF (331) 470pF (471) 680pF (681) 820pF (821) 1,000pF (102) 1,500pF (152) 2,200pF (222) 2,700pF (272) 3,300pF (332) 4,700pF (472) 6,800pF (682) 0.010µF (103) 0.015µF (153) N 0.022µF (223) N 0.033µF (333) N N 0.047µF (473) N N N N 0.068µF (683) N N N E 0.082µF (823) N N N E 0.10µF (104) N N N N E 0.15µF (154) N N N N 0.22µF (224) N N N N N X X X X 0.33µF (334) N N N N X X X X 0.47µF (474) N N N N E X X X X X 0.68µF (684) N N X X X X 0.82uF (824) X X X X 1.0µF (105) N N N N E X X X X X 1.5µF (155) X 2.2µF (225) N N N E X X X X X 3.3µF (335) X X 4.7µF (475) E E E* X X X X 6.8uF (685) 10µF (106) E* E* X X X X X 22µF (226) E* X* X* X* 47µF (476) X* X* Capacitance

Page <13> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Capacitance Dielectric X5R Size 0805 1206 1210 Rated Voltage (VDC) 4 6.3 10 16 25 50 4 6.3 10 16 25 50 4 6.3 10 16 25 35 50 1.0µF (105) D D D I P 1.5µF (155) I I I I J J P P K K 2.2µF (225) I I I I I J J P P K K 3.3µF (335) I I I I P P P P 4.7µF (475) I I I I I P P P P P K K K 6.8uF (685) P P 10µF (106) I I I I I P P P P P K K K K M M 22µF (226) I I* I* I* P P P P M M M M M 47µF (476) I* I* I* P P P* M M M M* 100µF (107) I* I* P M* M* M* 220µF (227) P* M* M* 1. The letter in cell is expressed the symbol of product thickness. 2. The letter in cell with “ * ” mark is expressed product not in 10% (code “K”) tolerance.

Page <14> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Reliability Test Conditions And Requirements No Item Test Condition Requirements

1 Visual and

• * No remarkable defect. * Dimensions to conform to individual specification sheet. 2 Capacitance *Test temp.: Room Temperature. *Class I: (NP0) ≤1000pF, 1 ±0.2Vrms, 1MHz±10% >1000pF, 1 ±0.2Vrms, 1KHz±10% Class II: (X7R, X7E, X6S, X5R,X7S,Y5V) C≤10μF, 1 ±0.2Vrms, 1KHz±10% ** C>10μF, 0.5±0.2Vrms, 120Hz±20% 0603/475(6.3V) X5R#1: 0402≥225(10V), 0603=106 (6.3V) TT18X≥475(10V) , TT15X series X6S: 0402≥225 (6.3V), X7S: 0402/225(6.3V) #1 Excluding 4(16V), 0402X475M6R3, 0402X106M100 (1.0±0.2Vrms, 1KHz±10%) *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Shall not exceed the limits given in the detailed spec. 3 Q/ D.F. (Dissipation Factor) NP0: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C X7R: Rated ≥ 100V ≤2.5% ≤3% 1206≥0.47µF ≤10% 0805≥0.22μF; 1210≥3.3μF 50V ≤2.5% 1206≥2.2µF;1210≥10µF 25V ≤3.5% ≤5% 0201≥0.01µF;0805≥1µF;1210≥10µF ≤7% 0603≥0.33µF 0805≥2.2µF;1206≥4.7µF;1210≥22µF ≤12.5% 0402≥0.33μF 16V ≤3.5% 0805≥0.68μF; 1206≥2.2μF; 1210≥4.7μF 0603>0.47μF; 0805≥2.2μF; 1206≥4.7μF; 1210≥22μF 10V ≤5% ≤10% 0201≥0.1μF; 0402≥1μF; 0603≥10μF; 0805≥4.7μF; 1206≥47μF; 1210≥100μF ≤15% 0201≥0.1µF;0402≥1µF 6.3V ≤10% 0805≥4.7µF;1206≥47µF;1210≥100µF ≤20% 0402≥2.2μF 4V ≤15% --- --- * I.R.: 10GΩ or RxC500Ω-F whichever is smaller. Class II (X7R)

Page <15> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro X5R: No Item Test Condition Requirements 3 Q/ D.F. (Dissipation Factor) *Test temp.: Room Temperature. *Class I: (NP0) ≤1000pF, 1 ±0.2Vrms, 1MHz±10% >1000pF, 1 ±0.2Vrms, 1KHz±10% Class II: (X7R, X7E, X6S, X5R,X7S,Y5V) C≤10μF, 1 ±0.2Vrms, 1KHz±10% ** C>10μF, 0.5±0.2Vrms, 120Hz±20% 0603/475(6.3V) X5R#1: 0402≥225(10V), 0603=106 (6.3V) TT18X≥475(10V) , TT15X series X6S: 0402≥225 (6.3V), X7S: 0402/225(6.3V) #1 Excluding 4(16V), 0402X475M6R3, 0402X106M100 (1.0±0.2Vrms, 1KHz±10%) *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Shall not exceed the limits given in the detailed spec. NP0: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C X7R: Rated ≥ 100V ≤2.5% ≤3% 1206≥0.47µF 50V ≤2.5% 1206≥2.2µF;1210≥10µF ≤12.5% 1206=10μF 25V ≤3.5% ≤5% 0201=0.01μF; 0805≥1μF ≤7% 0603≥0.33µF 0805≥2.2μF; 1206≥4.7μF; 1210≥10μF 16V ≤3.5% 0805≥0.68μF; 1206≥2.2μF; 1210≥4.7μF 0603>0.47μF; 0805≥2.2μF; 1206≥4.7μF; 1210≥22μF ≤12.5% 0402≥1μF;0805=10μF 10V ≤5% ≤10% 0201≥0.012μF; 0402≥0.22μF; 0603≥0.33μF; 0805≥2.2μF; 1206≥2.2μF; 1210≥22μF; 01R5/X5R ≤12.5% 0805=10μF ≤15% 0201≥0.1µF;0402≥1µF 0603≥10μF 6.3V ≤10% 0805≥4.7µF;1206≥47µF;1210≥100µF ≤20% 0402≥2.2μF 4V ≤15% --- --- * I.R.: 10GΩ or RxC500Ω-F whichever is smaller. Class II (X7R)

Page <16> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro No Item Test Condition Requirements 4. Dielectric Strength * To apply voltage (≤100V) 250%. * Duration: 1 to 5 sec. * Charge and discharge current less than 50mA. * No evidence of damage or flash over during test. 5. Insulation Resistance * Test temp.: Room Temperature. * To apply rated voltage for MAX. 120sec. 10G or RxC≥500Ω-F whichever is smaller. Class II (X7R, X7E, X5R,X6S,X7S,Y5V:) Rated voltage Insulation Resistance 100V: All X7R 10GΩ or RxC≥100 Ω-F whichever is smaller 50V:0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF 35V:0805≥2.2µF;1206≥2.2µF;1210≥10µF 25V:0402≥1µF;0603≥2.2µF;0805≥2.2µF;1206≥10µF;1210≥10µF 16V: 0201≥0.1μF,0402≥0.22μF;0603≥1μF; 0805≥2.2μF;1206≥10μF;1210≥47μF 10V: 0201≥47nF;0402≥0.47μF;0603≥0.47μF;0805≥2.2μF; 1206≥4.7μF;1210≥47μF 6.3V ; 4V ; Size≥1812 Rated voltage Insulation Resistance All X6S items, All X7S items RxC≥50 Ω-F. 100V: 1210≥3.3µF 50V: 0402≥0.1µF; 0603≥2.2µF; 0805≥10µF;1206≥10µF 35V: 0603≥1µF; 25V: 0201≥0.1µF; 0402≥2.2µF;0603≥10µF; 0805≥10µF;1206≥22µF 16V: 0603≥10µF; 0402≥1µF; 0201≥0.22µF 10V: 0201>0.1µF; 0402≥1µF; 0603≥10µF; 0805≥47µF 6.3V:0201≥0.1µF; 0402≥1µF; 0603>4.7µF; 0805≥47µF; 1206≥10µF 4V: 0603≥22µF; 0805≥47µF; 1206≥100µF

Page <17> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro No Item Test Condition Requirements 6. Temperature Coefficient With no electrical load. T.C. Operating Temp T.C. Capacitance Change NPO 55~125°C at 25°C NPO Within ±30ppm/°C X7R -55~125°C at 25°C X7R Within ±15% X5R -55~ 85°C at 25°C X5R Within ±15% *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Measurement voltage for Class II: 0402 0603 Cap<1μF: 1V Cap<1μF: 1V Cap=1μF: 0.5V 0402B224-16V: 0.5V 0402B334/474-6.3V&10V: 0.5V 0402S334/474-6.3V: 0.5V 0402X225/475-6.3V: 0.5V 1μF≤Cap≤4.7μF: 0.5V 0603X106-10V: 0.5V 1μF<Cap<10μF: 0.2V 0402B105M6R3V: 0.2V Cap>4.7μF: 0.2V Cap≥10μF: 0.1V 0805 1206/1210 Cap<10μF: 1V Cap≤10μF: 1V Cap=10μF: 0.5V 0805B475/6.3V~25V: 0.5V 10μF<Cap≤100μF: 0.5V Cap>10μF: 0.2V Cap>100μF: 0.2V 1206X107-6.3V: 0.2V 1210S107-6.3V: 0.2V 7. Adhesive Strength of Termination * Pressurizing force: 2N (0201) and 5N (≤0603) and 10N (>0603) * Test time: 10±1 sec. * No remarkable damage or removal of the terminations. 8. Vibration Resistance * Vibration frequency: 10~55 Hz/min. * Total amplitude: 1.5mm * Test time: 6 hrs. (Two hrs each in three mutually perpendicular directions.) * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Cap./DF(Q) Measurement to be made after de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * No remarkable damage. * Cap change and Q/D.F.: To meet initial spec. 9. Solderability * Solder temperature: 235±5°C * Dipping time: 2±0.5 sec. 95% min. coverage of all metalized area.

Page <18> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro No Item Test Condition Requirements 10. Bending Test * The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm per second until the deflection becomes 1 mm and then the pressure shall be maintained for 5±1 sec. * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Measurement to be made after keeping at room temp. for 24±2 hrs. * No remarkable damage. * Cap change: NP0: within ±5% or 0.5pF whichever is larger X7R, X5R, X6S, X7S: within ±12.5% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test.) 11. Resistance to Soldering Heat * Solder temperature: 260±5°C * Dipping time: 10±1 sec * Preheating: 120 to 150°C for 1 minute before immerse the capacitor in a eutectic solder. * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * No remarkable damage. * Cap change: NP0: within ±2.5% or 0.25pF whichever is larger X7R, X5R, X6S, X7S: within ±7.5% * 25% max. leaching on each edge. 12. Temperature Cycle * Conduct the five cycles according to the temperatures and time. Step Temp. (°C) Time (min.) 1 Min. operating temp. +0/-3 30± 3 2 Room temp. 2~3 3 Max. operating temp. +3/-0 30±3 4 Room temp. 2~3 * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * No remarkable damage. * Cap change: NP0: within ±2.5% or 0.25pF whichever is larger X7R, X5R, X6S, X7S: within ±7.5%

Page <19> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro No Item Test Condition Requirements 13. Humidity (Damp Heat) Steady State *Test temp.: 40±2°C *Humidity: 90~95%RH *Test time: 500+24/-0hrs. *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * No remarkable damage. * Cap change: NP0: within ±5% or 0.5pF whichever is larger X7R, X5R, X6S, X7S: ≥10V,within ±12.5%; ≤6.3V within ±25%; 10V: 0603≥4.7μF;0402≥1μF;0201≥0.1μF, within ±25%; * Q/D.F. value: NP0: More than 30pF Q≥350, 10pF≤C≤30pF, Q≥275+2.5C Less than 10pF Q200+10C X7R, X5R, X6S, X7S: Rated ≥ 100V ≤3% ≤6% 1206≥0.47µF 50V ≤3% 1206≥2.2µF;1210≥10µF 35V ≤5% ≤20% 0603≥1µF;0805≥2.2µF;1206≥2.2µF;1210≥10µF 25V ≤5% ≤14% 0603≥0.33µF ≤15% 0201≥0.1μF(0201/X5R>0.01μF); 0603≥0.47μF;TTseries ≤20% 0402≥0.33μF 16V ≤5% ≤15% 0201≥0.012μF;04028≥0.22μF (0402/X7R80.15μF); 0603≥0.33μF;0805≥2.2μF;1206≥2.2μF;1210≥22μF 10V ≤7.5% ≤15% 0201≥0.012μF;0402V0.22μF (0402/X7R≥0.15μF); 0603≥0.33μF;0805V2.2μF;1206≥2.2μF;1210≥22μF ≤20% 0201≥0.1μF;0402≥1μF;0603/X5R≥10μF;01R5/X5R 0603≥10μF;0805≥4.7μF;1206≥47μF;1210≥100μF 4V ≤20% --- --- *I.R.: ≥10V, 1GΩ or 50Ω-F whichever is smaller. Class II (X7R, X5R, X6S, X7S, Y5V) Rated voltage Insulation Resistance 100V: All X7R;1210≥3.3μF 1GΩ or RxC≥10 Ω-F whichever is smaller. 50V: 0402>0.01μF;0603≥1μF;0805≥1μF;12064.7μF;1210≥4.7μF 35V:0603≥1μF;0805≥2.2μF; 1206≥2.2μF;1210≥10μF 1206≥10μF;1210≥10μF 16V: 0201≥0.1uF;0402≥0.22μF;0603≥1μF;0805≥2.2μF; 1206≥10μF;1210≥47μF 10V:0201≥47nF;0402≥0.47μF;0603≥0.47μF;0805≥2.2μF; 1206≥4.7μF;1210≥47μF 6.3V ; 4V ; All X6S/X7S items; Size≥1812

Page <20> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro No Item Test Condition Requirements 14. Humidity (Damp Heat) Load *Test temp.: 40±2°C *Humidity: 90~95%RH *Test time: 500+24/-0 hrs. *To apply voltage: Rated voltage (MAX. 500V) *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de- aging at 150°C for 1hr then set for 24±2 hrs at room temp. * No remarkable damage. * Cap change: NP0: ±7.5% or 0.75pF whichever is larger. X7R, X5R, X6S, X7S: ≥10V,within ±12.5%; ≤6.3V within ±25%; 10V: 0603≥4.7μF;0402≥1μF;0201≥0.1μF, within ±25%; * Q/D.F. value: NP0: C≥30pF,Q≥200;C<30pF, Q≥100+10/3C X7R, X5R, X6S, X7S: Rated ≥ 100V ≤3% ≤6% 1206≥0.47µF 50V ≤3% 1206≥2.2µF;1210≥10µF 35V ≤5% ≤20% 0603≥1µF;0805≥2.2µF;1206≥2.2µF;1210≥10µF 25V ≤5% X5R=0.01μF);0805≥1μF;1210≥10μF* ≤14% 0603≥0.33µF ≤15% 0603≥0.47μF;TTseries ≤20% 0402≥0.33μF 16V ≤5% ≤15% 0201≥0.012μF;04028≥0.22μF (0402/X7R80.15μF); 0603≥0.33μF;0805≥2.2μF;1206≥2.2μF;1210≥22μF 10V ≤7.5% ≤15% 0201≥0.012μF;0402V0.22μF (0402/X7R≥0.15μF); 0603≥0.33μF;0805V2.2μF;1206≥2.2μF;1210≥22μF ≤20% 0201≥0.1μF;0402≥1μF;0603/X5R≥10μF;01R5/X5R 0603≥10μF;0805≥4.7μF;1206≥47μF;1210≥100μF 4V ≤20% --- --- *I.R.: ≥10V, 500MΩ or 25Ω-F whichever is smaller. Class II (X7R, X5R, X6S, X7S, Y5V) Rated voltage Insulation Resistance 100V: All X7R;1210≥3.3μF 500MΩor RxC≥5Ω-F whichever is smaller. 50V: 0402>0.01μF;0603≥1μF;0805≥1μF;12064.7μF;1210≥4.7μF 35V:0603≥1μF;0805≥2.2μF; 1206≥2.2μF;1210≥10μF 1206≥10μF;1210≥10μF 16V: 0201≥0.1uF;0402≥0.22μF;0603≥1μF;0805≥2.2μF; 1206≥10μF;1210≥47μF 10V:0201≥47nF;0402≥0.47μF;0603≥0.47μF;0805≥2.2μF; 1206≥4.7μF;1210≥47μF 6.3V ; 4V ; All X6S/X7S items; Size≥1812

Page <21> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro No Item Test Condition Requirements 15. High Temperature Load (Endurance) *Test temp.: NP0, X7R/X7E/X7S: 125±3°C X6S: 105±3°C X5R, Y5V: 85±3°C *Test time: 1000+24/-0 hrs. *To apply voltage: (1) 100% of rated voltage for below range. Size Dielectric Rated voltage Capacitance 0402 X5R ≥16V C >1.0μF≤16V 25V,50V X7R/X7S/ Y5V 6.3V,10V C≥1.0μF 0603 X5R/X7R/ X6S/X7S 4V C≥22μF 6.3V,10V C≥4.7μF X5R/X6S/ X7S 25V C≥1.0μF X7R 35V C≥1.0μF 0805 X5R/X7R/ X6S/X7S 4V C≥47μF 6.3V C≥22μF 10V,50V C≥10μF X7R/X7S 16V,25V C≥10μF X5R C≥22μF

1206 X5R/X7R/

X6S ≤6.3V C≥47μF 1210 X5R/X7R/ X6S 16V C≥47μF X7R 100V C≥3.3μF TT15 X5R 6.3V C >1.0μF TT21 X5R/X7R/ X6S ≤10V C >10μF ** 1WV items must follow de-rating conditions. (2) 150% of rated voltage for below range. * No remarkable damage. Cap change: NP0: ±3.0% or ±0.3pF whichever is larger X7R, X5R, X6S, X7S: ≥10V,within ±12.5%; ≤6.3V within ±25%; 10V: 0603≥4.7μF;0402≥1μF;0201≥0.1μF, within ±25% Q/D.F. value: NP0: More than 30pF, Q≥350 10pF≤C<30pF, Q≥275+2.5C Less than 10pF, Q≥200+10C X7R, X5R, X6S, X7S: *I.R.: 10V, 1GΩ or 50Ω-F whichever is smaller. Class II (X7R, X5R, X6S, X7S, Y5V) Rated ≥ 100V ≤3% ≤6% 1206≥0.47µF 50V ≤3% 1206≥2.2µF;1210≥10µF 35V ≤5% ≤20% 0603≥1µF;0805≥2.2µF;1206≥2.2µF;1210≥10µF 25V ≤5% ≤14% 0603≥0.33µF ≤15% 0201≥0.1μF(0201/X5R>0.01μF); 0603≥0.47μF;TTseries ≤20% 0402≥0.33μF 16V ≤5% ≤15% 0201≥0.012μF;04028≥0.22μF (0402/X7R80.15μF); 0603≥0.33μF;0805≥2.2μF;1206≥2.2μF;1210≥22μF 10V ≤7.5% ≤15% 0201≥0.012μF;0402V0.22μF (0402/X7R≥0.15μF); 0603≥0.33μF;0805V2.2μF;1206≥2.2μF;1210≥22μF ≤20% 0201≥0.1μF;0402≥1μF;0603/X5R≥10μF;01R5/X5R 0603≥10μF;0805≥4.7μF;1206≥47μF;1210≥100μF 4V ≤20% --- --- Rated voltage Insulation Resistance 100V: All X7R;1210≥3.3μF 1GΩor RxC≥10Ω-F whichever is smaller. 50V: 0402>0.01μF;0603≥1μF;0805≥1μF;12064.7μF;1210≥4.7μF 35V:0603≥1μF;0805≥2.2μF; 1206≥2.2μF;1210≥10μF 1206≥10μF;1210≥10μF 16V: 0201≥0.1uF;0402≥0.22μF;0603≥1μF;0805≥2.2μF; 1206≥10μF;1210≥47μF 10V:0201≥47nF;0402≥0.47μF;0603≥0.47μF;0805≥2.2μF; 1206≥4.7μF;1210≥47μF 6.3V ; 4V ; All X6S/X7S items; Size≥1812

Page <22> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro No Item Test Condition Requirements 15. High Temperature Load (Endurance) Size Dielectric Rated voltage Capacitance

0402 X7R/X5R/

50V C>0.01μF 10~25V C≥0.22μF 0603 X7R 50V C>0.1μF 25V C=1.0μF X5R 50V C≥1.0μF X5R/X7R/ X6S/X7S 10V,16V C≥1.0μF Y5V 16V C≥2.2μF

0805 X5R/X7R/

100V C≥0.47μF 50V C≥0.68μF 35V C≥2.2μF 10~25V C≥4.7μF 1206 X7R 100V C≥1.0μF 50V C≥2.2μF X5R/X6S/ X7S 100V C>1.0μF 50V C=4.7μF

1210 X5R/X7R/

X6S/X7S 50V~100V C≥2.2μF (3) 6.3V or C 10μF :150% of rated voltage. (4) 10V Ur < 500V: 200% of rated voltage. (5) 500V: 150% of rated voltage. (6) Ur 630V: 120% of rated volt- age * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. ** De-rating conditions: The general MLCC products are designed for use in devices with a typical lifetime around 10 years. The general MLCC products are designed so that the useful lifetime can be extended longer than 10 years under the following conditions: (80% of the rated voltage or less, Maximum operating temperature -20 degree C or less) Extended useful lifetime, under specific operating conditions, can be estimated from the chart.

• The useful lifetime is the time when cumulative failure rate becomes 1%.
• Please note that the useful lifetime data is for reference only and not guaranteed. * "Room condition" Temperature: 15 to 35°C, Relativ e humidity: 25 to 75%, Atmospheric pressure: 86 to 106kPa.

Page <23> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Tape & reel dimensions APPENDIXES Size 0402 0603 0805 1206 1210 18812 Thickness N,E S,H,X A,H B,T D,I B,T C,J,D G,P T C,D G,K M D,F G,K M,U A0 0.7 +/-0.2 1.05 +/-0.3 1.5 +/-0.2 1.5 +/-0.2 < 1.8 1.9 B0 1.2 +/-0.2 1.8 +/-0.3 2.3 +/-0.2 2.3 +/-0.2 < 2.7 3.5 +/-0.1 ≤1.2 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.25 +/-0.1 0.25 +/-0.1 0.25 +/-0.1 W 8 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 +/-0.3 P0 4 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 10xP0 40 +/-0.1 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 +/-0.2 P1 2 +/-0.05 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 P2 2 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.1 +/-0.1 +/-0.1 D0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 D1 - - - - 1 +/-0.10 - 1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 +/-0.1 1.5 +/-0.1 1.5 +/-0.1 1.5 +/-0.1 E 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 1.75 +/-0.1 F 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 3.5 +/-0.05 5.5 +/-0.1 5.5 +/-0.1 5.5 +/-0.1

Page <24> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Storage and handling conditions (1) To store products at 5°C to 40°C ambient temperature and 20% to 70%. related humidity conditions; MSL Level 1. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight, the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. Application Notes Constructions No. Name NP0 X7R

1 Ceramic material CaZrO3 based BaTiO3 based

2 Inner electrode Ni

4 Middle layer Ni

5 Outer layer Sn

Size 0402, 0603, 0805 1206, 1210 1812 Reel size 7” 10” 13” 7” C 13 ±0.5 13 ±0.5 13 ±0.5 13 ±0.5 A 178 ±2 250 ±2 330 ±2 178 ±2 N 60 +1/-0 50 min 50 min 60+1/-0

Page <25> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Description Part Number SMD Multilayer Ceramic Capacitors, 0402, X7R, 1nF, 5%, 16V MC0402B102J160CT SMD Multilayer Ceramic Capacitors, 0402, X7R, 15nF, 10%, 50V MC0402B153K500CT SMD Multilayer Ceramic Capacitors, 0402, X7R, 22nF, 5%, 25V MC0402B223J250CT SMD Multilayer Ceramic Capacitors, 0402, X7R, 470nF, 10%, 10V MC0402B474K100CT SMD Multilayer Ceramic Capacitors, 0402, NPO, 10pF, 10%, 50V MC0402N100K500CT SMD Multilayer Ceramic Capacitors, 0402, NPO, 100pF, 5%, 100V MC0402N101J101CT SMD Multilayer Ceramic Capacitors, 0402, NPO, 1nF, 5%, 25V MC0402N102J250CT SMD Multilayer Ceramic Capacitors, 0402, NPO, 12pF, 5%, 25V MC0402N120J250CT SMD Multilayer Ceramic Capacitors, 0402, NPO, 22pF, 1%, 50V MC0402N220F500CT SMD Multilayer Ceramic Capacitors, 0402, X5R, 1uF, 20%, 16V MC0402X105M160CT SMD Multilayer Ceramic Capacitors, 0603, X7R, 270nF, 10%, 16V MC0603B274K160CT SMD Multilayer Ceramic Capacitors, 0603, X7R, 47nF, 5%, 50V MC0603B473J500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 10pF, 0.25pF, 50V MC0603N100C500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 10pF, 1%, 100V MC0603N100F101CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 10pF, 10%, 50V MC0603N100K500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 100pF, 5%, 25V MC0603N101J250CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 1nF, 5%, 100V MC0603N102J101CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 16pF, 5%, 50V MC0603N160J500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 22pF, 10%, 25V MC0603N220K250CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 2700pF, 5%, 50V MC0603N272J500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 3300pF, 1%, 50V MC0603N332F500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 36pF, 5%, 50V MC0603N360J500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 470pF, 5%, 100V MC0603N471J101CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 4700pF, 1%, 50V MC0603N472F500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 4700pF, 5%, 25V MC0603N472J250CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 510pF, 5%, 50V MC0603N511J500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 5.6pF, 0.25pF, 50V MC0603N5R6C500CT SMD Multilayer Ceramic Capacitors, 0603, NPO, 62pF, 5%, 50V MC0603N620J500CT Part Number Table Fig. 6 Recommended reflow soldering profile for SMT process with SnAgCu series solder paste. Fig. 7 Recommended wave soldering profile for SMT process with SnAgCu series solder.

Page <26> V1.006/09/24 SMD Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Description Part Number SMD Multilayer Ceramic Capacitors, 0603, NPO, 6800pF, 5%, 50V MC0603N682J500CT SMD Multilayer Ceramic Capacitors, 0603, X5R, 100nF, 10%, 25V MC0603X104K250CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 1nF, 10%, 1KV MC0805B102K102CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 10nF, 10%, 500V MC0805B103K501CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 1uF, 5%, 10V MC0805B105J100CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 1uF, 5%, 16V MC0805B105J160CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 1uF, 5%, 25V MC0805B105J250CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 10uF, 20%, 10V MC0805B106M100CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 220nF, 5%, 100V MC0805B224J101CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 220nF, 10%, 100V MC0805B224K101CT SMD Multilayer Ceramic Capacitors, 0805, X7R, 680nF, 10%, 50V MC0805B684K500CT SMD Multilayer Ceramic Capacitors, 0805, NPO, 10nF, 1%, 50V MC0805N103F500CT SMD Multilayer Ceramic Capacitors, 0805, NPO, 10nF, 5%, 50V MC0805N103J500CT SMD Multilayer Ceramic Capacitors, 0805, NPO, 22nF, 1%, 50V MC0805N223F500CT SMD Multilayer Ceramic Capacitors, 0805, NPO, 22nF, 5%, 50V MC0805N223J500CT SMD Multilayer Ceramic Capacitors, 0805, X5R, 1uF, 20%, 50V MC0805X105M500CT SMD Multilayer Ceramic Capacitors, 1206, X7R, 1nF, 20%, 50V MC1206B102M500CT SMD Multilayer Ceramic Capacitors, 1206, X7R, 10nF, 20%, 50V MC1206B103M500CT SMD Multilayer Ceramic Capacitors, 1206, X7R, 1uF, 20%, 50V MC1206B105M500CT SMD Multilayer Ceramic Capacitors, 1206, X7R, 22uF, 10%, 10V MC1206B226K100CT SMD Multilayer Ceramic Capacitors, 1206, X7R, 47nF, 10%, 500V MC1206B473K501CT SMD Multilayer Ceramic Capacitors, 1206, NPO, 1500pF, 5%, 50V MC1206N152J500CT SMD Multilayer Ceramic Capacitors, 1206, X5R, 4.7uF, 10%, 50V MC1206X475K500CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 1nF, 10%, 2KV MC1210B102K202CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 10nF, 5%, 1KV MC1210B103J102CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 10uF, 10%, 50V MC1210B106K500CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 2.2uF, 10%, 50V MC1210B225K500CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 22uF, 10%, 25V MC1210B226K250CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 22uF, 20%, 25V MC1210B226M250CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 3.3uF, 10%, 50V MC1210B335K500CT SMD Multilayer Ceramic Capacitors, 1210, X7R, 4700pF, 10%, 2KV MC1210B472K202CT SMD Multilayer Ceramic Capacitors, 1210, X5R, 10uF, 20%, 50V MC1210X106M500CT SMD Multilayer Ceramic Capacitors, 1210, X5R, 100uF, 20%, 16V MC1210X107M160CT SMD Multilayer Ceramic Capacitors, 1812, X7R, 10nF, 10%, 2KV MC1812B103K202CT SMD Multilayer Ceramic Capacitors, 1812, X7R, 1uF, 10%, 50V MC1812B105K500CT