MC038-010 DANFOSS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • User-programmable with PLUS+1 GUIDE
  • Support of unlimited read-write FRAM, 2MB flash vault memory
  • 38 pins: (1) DEUTSCH DRC connector
  • 32 bit fixed-point DSP running at 150 MHz
  • 12 bit analog-to-digital converter
  • 15 inputs
  • 13 outputs
  • 9 to 36 VDC power supply, monitored internally
  • 2 CAN 2.0 B ports, the fixed range analog input can be configured as the shield pin
  • 1 independent ECU power supply, 6 VDC to 36 VDC, and regulated internally
  • 3 independent power supplies for powering output pins, 9 to 36 VDC
  • 1 CAN 2.0B port. The fixed range analog (AIN/CAN Shield) pin may be configured as a shield pin
  • 5 VDC power supply for external sensors rated at 150 mA, monitored and regulated internally
  • 2 LEDs under application software control
  • CE compliant Data Sheet PLUS+1® Controllers MC038-010 and MC038-012 © Danfoss | August 2018 11051653 | AI00000044en-US0301 | 1

15 Inputs

  • (3 universal (DIN/AIN/FreqIN) that are user-defined as either: ‒ Analog: with configurable ranges 0 to 5.25 VDC (with over range protection) or 0 to 36 VDC ‒ Digital: pull up (5 VDC), pull down (0 VDC) or pull to center (2.5 VDC) ‒ Frequency (timing): 1 Hz to 10 kHz
  • (2) digital (DIN) configurable as pull up (5 VDC), pull down (0 VDC)
  • (9) digital/analog (DIN/AIN) that are user-defined as either: ‒ Digital: pull up (5 VDC), pull down (0 VDC) or pull to center (2.5 VDC) ‒ Analog: 0 to 5.25 VDC or 0 to 36 VDC
  • (1) fixed range analog (AIN/CAN shield)0 to 5.25 VDC or CAN shield pin

13 Outputs

  • (2) DOUT (2 A) configurable as source only
  • (3) HDOUT (6 A) configurable as source only
  • (3) HPWMOUT/DOUT (6 A), configurable as source only
  • (4) HPWMOUT/DOUT (10 A) configurable as source only, can be used as bi-directional pairs, (see Dimensions and Pin Assignments, back page for pair assignments)
  • (1) HPWMOUT/DOUT (10A) configurable as source only
  • Outputs are powered by three independent power supply pins (see Dimensions and Pin Assignments, back page for output pin power supply assignments and maximum allowable current per power supply pin)
  • All PWM outputs operate as open loop. The output is a constant voltage. Comprehensive technical literature is online at www.danfoss.com Characteristics Specifications Supply voltage 9 to 36 VDC Operating temperature (ambient) –40 °C to +70 °C [–40 °F to +158 °F] Storage temperature –40 °C to +85 °C [–40 °F to +185 °F] Programming temperature 0 °C to +70 °C [+32 °F to +158 °F] IP rating (with mating connector attached) IP 67 EMI/RFI rating 100 V/M Weight 0.53 kg [1.16 lb] Vibration IEC 60068-2-64 Shock IEC 60068-2-27 test Ea Max. current, sourcing 70 A Max. current, sinking 25 A Max. current, power pins: C1-P36, C1-P37, C1-P38 25 A per pin Data Sheet MC038-010 and MC038-012 2 | © Danfoss | August 2018 11051653 | AI00000044en-US0301

Dimensions and pin assignments Mounting dimensions in mm 47.1 51.6 193.8 159.7 144.5 114.4 147.5 35.7 139.11 32.4 CCaution PCB damage may occur. To prevent damage to the module all module power supply + pins must be connected to the vehicle power supply to support advertised module maximum output current capacity. DO NOT use module power supply + pins to supply power to other modules on a machine. CCaution Warranty will be voided if device is opened. Device is not field serviceable. Do not open the device. Use care when wiring mating connector. Pinouts are for device pins. Pin connector 37 29 34 36 6 1 Pin Function Pin Function C1-P1 CPU power ground - C1-P20 DIN/AIN C1-P2 CPU power supply + C1-P21 HPWM/DOUT (6A-Pwr = C1-P37, source only) C1-P3 CAN0 + C1-P22 HPWM/DOUT (10A-Pwr = C1-P37, source only) C1-P4 CAN0 - C1-P23 DOUT (2A-Pwr = C1-P38, source only) C1-P5 AIN/CAN shield C1-P24 DIN/AIN C1-P6 DIN C1-P25 DIN/AIN C1-P7 DIN C1-P26 DIN/AIN C1-P8 5 V DC sensor power + C1-P27 DIN/AIN C1-P9 Sensor power ground - C1-P28 DOUT (2A-Pwr = C1-P38, source only) C1-P10 DIN/AIN/FreqIN C1-P29 DOUT (2A-Pwr = C1-P38, source only) C1-P11 DIN/AIN/FreqIN C1-P30 DOUT (6A-Pwr = C1-P38, source only) C1-P12 DIN/AIN/FreqIN C1-P31 DOUT (6A-Pwr = C1-P38, source only) C1-P13 HPWM/DOUT (10A-Pwr = C1P37, pair with C1-P15) C1-P32 DOUT (6A-Pwr = C1-P38, source only) C1-P14 DIN/AIN C1-P33 HPWM/DOUT (6A-Pwr = C1-P36, source only) C1-P15 HPWM/DOUT (10A-Pwr = C1P37, pair with C1-P13) C1-P34 HPWM/DOUT (10A-Pwr = C1-P36, pair with C1-P29) C1-P16 HDOUT (6A-Pwr = C1-P38, source only) C1-P35 Output power ground - C1-P17 DIN/AIN C1-P36 Output power supply + C1-P18 DIN/AIN C1-P37 Output power supply + C1-P19 DIN/AIN C1-P38 Output power supply + Data Sheet MC038-010 and MC038-012 © Danfoss | August 2018 11051653 | AI00000044en-US0301 | 3

Related products part numbers CG150 CAN/USB Gateway 11153051 DEUTSCH mating connector bag assembly 11027919 (16 to 20 AWG) PLUS+1 GUIDE Professional 11179523 Comprehensive information MC0XX-0XX Controller Family Technical Information, 520L0719 MC038-010 and MC038-012 Application Program Interface (API) document Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. 4 | © Danfoss | August 2018 11051653 | AI00000044en-US0301