MBT-283 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Bias-Tee The Big Deal

  • Extremely Wideband, 1.5 to 28 GHz
  • Very low insertion loss, 0.7 dB typ.
  • Good return loss, 20 dB typ.
  • Excellent Isolation, 47 dB typ. Product Overview Mini-Circuits’ MBT-283+ is an ultra-wideband MMIC surface mount bias tee covering applications from 1.5 GHz to 28 GHz with low insertion loss, excellent return loss, and high DC-RF isolation over its entire frequency range. This model is capable of handling up to +30 dBm (1W) RF input power and DC input current up to 500mA. MBT-283+ is enclosed in a 3.5 x 2.5mm, 16-lead MCLP package for good thermal performance. Feature Advantages Ultra-wideband, 1.5 to 28 GHz Supports a wide range of applications with a single device, including biasing broadband amplifier, laser diodes, active antennas and more. Low insertion loss, 0.7 dB Preserves signal strength from input to output and minimizes overall system loss Excellent return loss, 20 dB typ. Provides excellent matching for 50 systems with minimal signal reflection. RF power handling up to 1W This model supports applications with a variety of power requirements. Excellent DC-RF isolation
  • 59 dB, 1.5 to 10 GHz
  • 47 dB, 10 to 20 GHz
  • 48 dB, 20 to 28 GHz Minimizes RF leakage and interference with other elements in the system. Key Features MBT-283+ 50Ω Wideband, 1.5 to 28 GHz MMIC CASE STYLE: JV2579

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Bias-Tee MMIC simplified schematic & pad description Function Pad Number Description RF 4 RF Pad RF + DC 10 RF + DC Pad DC 15 DC Pad, Connects DC port via C1 N/C 1,2, 6-8, 12-14 & 16 No connection, grounded on Test Board. GROUND 3,5,9,11 & Paddle Ground Product Features

  • Extremely Wideband, 1.5 to 28 GHz
  • Very low insertion loss, 0.7 dB typ.
  • Good return loss, 20 dB typ.
  • Excellent Isolation, 47 dB typ.
  • Patent pending REV. OR ECO-004199 MBT -283+ GY/RS/CP 200921 General Description Mini-Circuits’ MBT-283+ is an ultra-wideband MMIC surface mount bias tee covering applications from 1.5 GHz to 28 GHz with low insertion loss, excellent return loss, and high DC-RF isolation over its entire frequency range. This model is capable of handling up to +30 dBm (1W) RF input power and DC input current up to 500mA. MBT-283+ is enclosed in a 3.5 x 2.5mm, 16-lead MCLP package for good thermal performance. Typical Applications
  • Biasing Amplifiers
  • Biasing laser diodes
  • Biasing of active antennas 50Ω Wideband, 1.5 to 28 GHz MBT-283+ CASE STYLE: JV2579 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Generic photo used for illustration purposes only

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Absolute Maximum Ratings2 Parameter Ratings Operating Temperature -40°C to 85°C Storage Temperature -65°C to 150°C RF Power 30 dBm Voltage at DC Port 35V Current at DC Port 500mA 2. Permanent damage may occur if any of these limits are exceeded. MBT-283+ 1. Measured on Mini-Circuits Characterization Test Board TB-MBT-283+. See Characterization Test Circuit (Fig. 1) Electrical Specifications1 at 25°C, unless noted Parameter Frequency (MHz) Min. Typ. Max. Units Frequency Range 1500 28000 MHz Insertion Loss 1500 - 10000 0.7 1.3 dB 10000 - 20000 0.7 1.6 20000 - 25000 0.7 1.8 25000 - 28000 1.0 2.1 Isolation (RF Port to DC Port) 1500 - 10000 57 dB 10000 - 20000 47 20000 - 25000 48 25000 - 28000 47 Return Loss 1500 - 10000 19 dB 10000 - 20000 21 20000 - 25000 16 25000 - 28000 14 DC resistance from DC to RF & DC port 2.7 Ohm

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits MBT-283+ Product Marking MCL BT28 black body model family designation index over pin 1 Characterization Test & Application Circuit Fig 1. Block Diagram of Test Circuit used for characterization. Test Board TB-MBT-283+ Parameter to measure: Insertion Loss, Isolation, Return Loss Condition: Pin = 0 dBm Marking may contain other features or characters for internal lot control Component Size Value Part Number Manufacturer C1 0402 0.1uF GRM155R71H104KE14J Murata

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits MBT-283+ ESD Rating Human Body Model (HBM): Class 1B (500 V) in accordance with ANSI/ESD STM 5.1 - 2001 Performance Data Data Table Swept Graphs S-Parameter (S3P Files) Data Set (.zip file) Case Style JV2579 Plastic package, exposed paddle, lead finish: Matte-Tin Plate Tape & Reel F104 Standard quantities available on reel 7” reels with 2K devices Suggested Layout for PCB Design PL-692 Evaluation Board TB-MBT-283+ & TB-MBT-283C+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here MSL Test Flow Chart Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish