MBR0530T1 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

/C0083/C0117/C0114/C0102/C0097/C0099/C0101 /C0077/C0111/C0117/C0110/C0116 /C0083/C0099/C0104/C0111/C0116/C0116/C0107/C0121 /C0080/C0111/C0119/C0101/C0114 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114 Plastic SOD–123 Package . . . using the Schottky Barrier principle with a large area metal–to–silicon power diode. Ideally suited for low voltage, high frequency rectification or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. This package also provides an easy to work with alternative to leadless 34 package style. These state–of–the–art devices have the following features:

  • Guardring for Stress Protection
  • Low Forward Voltage
  • 125°C Operating Junction Temperature
  • Epoxy Meets UL94, VO at 1/8″
  • Package Designed for Optimal Automated Board Assembly Mechanical Characteristics
  • Reel Options: MBR0530T1 = 3,000 per 7″ reel/8 mm tape Reel Options: MBR0530T3 = 10,000 per 13″ reel/8 mm tape
  • Device Marking: B3
  • Polarity Designator: Cathode Band
  • Weight: 11.7 mg (approximately)
  • Case: Epoxy, Molded
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR

30 Volts

Average Rectified Forward Current (Rated VR ) TL = 100°C IF(AV) 0.5 Amps Non–repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 5.5 Amps Storage Temperature Tstg –65 to +125 °C Operating Junction Temperature TJ –65 to +125 °C Voltage Rate of Change (Rated VR ) dv/dt 1000 V/µs THERMAL CHARACTERISTICS Thermal Resistance — Junction to Ambient (1) R θJA 340 °C/W Thermal Resistance — Junction to Lead (1) R θJL 150 °C/W

ELECTRICAL CHARACTERISTICS

Maximum Instantaneous Forward Voltage (2) (iF = 0.1 Amps, TJ = 25°C) (iF = 0.5 Amps, TJ = 25°C) VF 0.375 0.43 Volts Maximum Instantaneous Reverse Current (2) (Rated dc Voltage, TC = 25°C) (VR = 15 V, TC = 25°C) IR 130 µA (1) FR–4 or FR–5 = 3.5 x 1.5 inches using the Motorola minimum recommended footprint. (2) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2%. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by MBR0530T1/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1996 Rev 1 /C0077/C0066/C0082/C0048/C0053/C0051/C0048/C0084/C0049 /C0077/C0066/C0082/C0048/C0053/C0051/C0048/C0084/C0051 SCHOTTKY BARRIER RECTIFIER

0.5 AMPERES

CASE 425–04 SOD–123 Motorola Preferred Devices

2 Rectifier Device Data

Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current Figure 3. Typical Capacitance Figure 4. Current Derating (Lead) Figure 5. Power Dissipation

/C0077/C0066/C0082/C0048/C0053/C0051/C0048/C0084/C0049 3Rectifier Device Data RECOMMENDED FOOTPRINT FOR SOD–123 SOD–123 ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ mm inches 0.91 0.036 1.22 0.048 2.36 0.093 4.19 0.165

/C0077/C0066/C0082/C0048/C0053/C0051/C0048/C0084/C0049

4 Rectifier Device Data

CASE 425–04 ISSUE C PLASTIC NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. STYLE 1: PIN 1. CATHODE 2. ANODE ÂÂÂÂ ÂÂÂÂ ÂÂÂÂ B D K A C E J H DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.055 0.071 1.40 1.80 B 0.100 0.112 2.55 2.85 C 0.037 0.053 0.95 1.35 D 0.020 0.028 0.50 0.70 H 0.000 0.004 0.00 0.10 K 0.140 0.152 3.55 3.85 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 MBR0530T1/D◊ CODELINE TO BE PLACED HERE