MBR0520PBF IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

SCHOTTKY DIODE 0.5 Amp MBR0520PbF Bulletin PD-21131 rev. A 08/06 1www.irf.com Major Ratings and Characteristics I F(AV)(DC) 0.5 A VRRM 20 V IFSM @ tp= 10 ms sine 6.5 A VF @ 0.5Apk, TJ= 100°C 0.36 V TJ range - 65 to 150 °C Characteristics Value Units Case Styles SOD123 IF(AV) = 0.5Amp VR = 20V This Schottky diode is ideally suited for low voltage, high frequency operation, as freewheeling and polarity protection. Small size of the package allows proper use in application where compact size is critical, fitting also the GSM and PCMCIA requirement. Surface mountable Very low forward voltage drop Extremely fast switching Negligible switching losses Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Description/ Features (A) (K)

Bulletin PD-21131 rev. A 08/06 2 www.irf.com Part number Value VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings IF Max. Average Forward Current 0.5 A DC, T L = 129°C IFSM Max. Peak One Cycle Non-Repetitive 55 A 5 μs Sine or 3μs Rect. pulse Surge Current, @ 25°C 6.5 A 10ms Sine or 6ms Rect. pulse Parameters Value Units Conditions Absolute Maximum Ratings Following any rated load condition and with rated V RRM applied TJ Max. Junction Temperature Range (*) - 65 to 150 °C Tstg Max. Storage Temperature Range - 65 to 150 °C RthJL Max. Thermal Resistance Junction 150 °C/W Mounted on PC board FR4 with minimum pad size to Lead RthJA Max. Thermal Resistance Junction 200 °C/W 1 inch square pad size (1 x 0.5 inch for each lead) on to Ambient FR4 board Wt Approximate Weight 0.012 g r Case Style SOD123 Device Marking A YWLC Thermal-Mechanical Specifications Parameters Value Units Conditions VFM Max. Forward Voltage Drop (1) 0.375 V @ 0.1A T J = 25°C 0.440 V @ 0.5A VFM Max. Forward Voltage Drop (1) 0.260 V @ 0.1A T J = 100°C 0.360 V @ 0.5A IRM Max. Reverse Leakage (1) 40 μAT J = 25°C V R = 10V Current 3 mA T J = 100°C 150 μAT J = 25°C V R = 20V 7m A T J = 100°C CT Max. Junction Capacitance 110 pF V R = 5VDC (test signal range 100KHz to 1Mhz), TJ = 25°C dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated VR) Electrical Specifications Parameters Value Units Conditions (1) Pulse Width < 300μs, Duty Cycle < 2% (*)dPtot 1 dTj Rth( j-a)< thermal runaway condition for a diode on its own heatsink

Bulletin PD-21131 rev. A 08/06 3www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 1 - Maximum Forward Voltage Drop Characteristics Instantaneous Forward Current - I F (A) Forward Voltage Drop - V FM (V) Reverse Voltage - V R (V) Reverse Current - I R (mA) Reverse Voltage - V R (V) Junction Capacitance - C T (pF) 0.01 0.1 Tj = 150˚C Tj = 100˚C Tj = 25˚C 100 1000 0 5 10 15 20 25 T = 25˚CJ 0.0001 0.001 0.01 0.1 100 0 5 10 15 20 2 5 125˚C 100˚C 75˚C 50˚C 25˚C Tj = 150˚C

Bulletin PD-21131 rev. A 08/06 4 www.irf.com Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current Allowable Lead Temperature (°C) Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Average Power Loss (Watts) Square Wave Pulse Duration - t p (microsec) Non-Repetitive Surge Current - I FSM (A) 100 110 120 130 140 150 160 0 0.2 0.4 0.6 0.8 DC D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Square Wave (D = 0.50) see note (2) 100 10 100 1000 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 0.1 0.2 0.3 0 0.2 0.4 0.6 0.8 DC RMS Limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D)

Bulletin PD-21131 rev. A 08/06 5www.irf.com Tape & Reel Information Outline Table SOT23 B L K H J A C α SOLDERING PAD DIM Millimeters Inches Min Max Min Max A 0.55 0.70 0.022 0.028 B 1.40 1.70 0.055 0.067 C 3.55 3.85 0.140 0.152 H 2.55 2.85 0.100 0.112 J - 0.10 - 0.004 K 0.95 1.35 0.037 0.053 L - 0.5 - 0.02 M - 0.15 - 0.006 α 8° 8° C 4.19 mm 0.165" 2.36 mm 0.093" 1.22 mm 0.048" 0.91 mm 0.036" Dimensions in millimeters and (inches) Ordering Information Table Device Package Marking Base qty Delivery mode MBR0520 SOD-123 A YWLC 3000 Tape & Reel

Bulletin PD-21131 rev. A 08/06 6 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site.