MBP250-2A13D13M MORNSUN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
- A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation 0W, 165 264VAC Input, Dual output AC/DC battery charging module power supply RoHS
FEATURES
consumption, Maximum instantaneous power up to 350W With charging function, the V output Lead-acid battery can be charged, when system connected with battery, it can be used as uninterrupted power supply With charge and discharge management, battery status display, battery activation, external communications and control functions Output over-current, over-voltage protection b attery reverse polarity protection .5K VAC h igh isolation voltage Industrial grade operating temperature: -40 to +70 Chassis mounting MBP250-2A13D13M is AC/DC battery charge power converter offered by Mornsun. It range, taking both DC and AC input voltage, output over-current, over-voltage protection, strong ability in adapting power grid. This product has power working status display and Intelligent charging function, it can used to charge the V lead-acid battery, when AC is power-off, the battery can supply power to the load; it has battery activations and over discharge protection function, the activation maintenance of battery can be done manual or automatic through external signals. Designed specifically for distribution automation terminal (DTU FTU). It is widely used in the power industry switch substations, power substation, RMU, Intelligent Package Substation, Intelligent Switch Controller and other industries which need uninterrupted power supply. Selection Guide Part No. Output Power N ominal Output Voltage and Current Maximum Output Power Efficiency (220VAC, o o B B MBP250-2A13D13M W 13.5 4.5 A 13.5 V/1.5A 350W (Po= Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Voltage Range AC input 165 220 264 VAC DC input 200 310 VDC Input frequency Hz Input current 220VAC, Typical load 2.0 A Inrush current 220VAC Hot Plug Unavailable Output Specifications Item Operating Conditions Min. Typ. Max. Unit Output Current Input voltage range, charge current lB (30S) A (1S) Output Voltage Accuracy Input voltage range Output voltage accuracy Charge current accuracy Line Regulation Full load do not connect the battery 0.5 Load Regulation 10%-100% load do not connect the battery Ripple Noise* 20MHz bandwidth peak-to-peak value 200 mV Battery charge current 1.5 A Battery discharge cut-off point Typical load 10.25 10.5 10.75 V Battery activation finished point Typical load 11.25 11.5 Battery under voltage alarm point Typical load 11.25 11.5 Battery discharge cut-off delay time Typical load s Remote control c ontact time Remote control activating function on/off 0.5 Remote control battery exit
- A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Stand-by Power Consumption Input voltage range Po= W VA Short Circuit Protection Input voltage range disconnect the battery Hiccup Continuous, self-recovery Over-current Protection A Over-voltage Protection Input voltage range, do not connect the battery V Battery Reverse Polarity Protection When there is no AC input and battery reverse connection, press the battery start button, power supply will not have output, and the indicator doesn't light. When battery is reverse connected, turn on the AC input, the under-voltage will light up. power supply have no output, but will not be damaged (No battery reverse connection, when there is AC input) Hold-up Time Input voltage range Po=1 W 500 m s Note: *Ripple and noise are measured by c ontact measuring method method, please see AC-DC Converter Application Notes for specific operation General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Voltage Input-output Test time: 1min 2500 VAC Input -Case 2500 output -Case 2500 Impulse Voltage Input-output Apply 5kV impulse test voltage between input and output. Add 1.2/50us impact waveform, including three positive impulse and three negative impulse whose time interval is no less than seconds. And there should not have disruptive discharge during the test. 5000 V Input -Case 5000 output -Case 5000 Isolation Resistance Input-output Room temperature M Ω Input -Case Room temperature output -Case Room temperature Operating Temperature* -40 +70 Storage Temperature -40 +105 Shell Operation temperature* +80 Storage Humidity %RH MTBF MIL-HDBK-217F@25 100,000 h Note: When the ambient temperature exceeds it should be taken the cooling method of force air cooling or post cooling to ensure that the module shield temperature is not more than Physical Specifications Casing Material Metal Package Dimensions 168.00*11 0*4 2.5 mm Weight Kg (Typ.) Cooling method Free air convection EMC Specifications EMS ESD IEC/EN61000-4-2 Contact KV Perf. Criteria B RS IEC/EN61000-4-3 V/m perf. Criteria A EFT IEC/EN61000-4-4 Power port 4KV perf. Criteria B IEC/EN61000-4-4 Signal port KV perf. Criteria B Surge IEC/EN61000-4-5 Power port line to line 2KV/ line to ground 4KV perf. Criteria B CS IEC/EN61000-4-6 10Vr.m.s perf. Criteria A PFM IEC/EN61000-4-8 100A/m perf. Criteria A Voltage dips, short interruptions and voltage variations immunity IEC/EN61000-4-11 70% perf. Criteria B
- A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Principle block diagram Fig1. Internal principle diagram Fig2. Internal isolation diagram P anel
description
1.Charging and operation indicator light 4.Battery under-voltage indicator light 7.Manual activation quit button 2.Battery discharge indicator light 5.Battery fault indicator light 8.Manual battery input button 3.Battery activation indicator light 6.Manual activation start button 9.Manual battery quit button 10.Terminal
- A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Wiring
1.Terminal Definition Terminal No. Terminal name Definition Terminal No. Terminal name Definition Terminal No. Terminal name Definition ACL AC input L phase VH Power supply fault alarm signal output terminal Vo+ Load output (+) PE Protective grounding HK Remote activation start contact terminal Vo+ Load output (+) ACN AC input N phase HG Remote activation quit contact terminal Battery input (+) NC No electrical connection BG Remote battery quit contact terminal Battery input (+) VC Power supply for alarm unit (+5v to +24V DC) RL Power supply for active discharge resistor (+) Battery input (-) POK Input loss alarm signal output terminal VG Remote public contact terminal Battery input (-) HOK Battery Activated state signal output terminal Vo- Load output (-) VL Battery under-voltage alarm signal output terminal Vo- Load output (-) Wiring diagram Wiring Description: are the contact points for the user s CPU and other control R is the battery activated discharge resistance, load is the user's normal load, the battery is V battery pack. Terminal capacity is 300V/15A. The specific use please refer to the Using Manual instructions FUSE
- A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Manual Instruction Power supply status indicator Charge, lights Green, Battery C harge indication, It lights when the battery is c harging and off when the battery is discharging or activat ed. Discharge, lights Red, Battery Disc harge indication, It lights when the battery is disc harging or activat ed. It goes off when the battery is charging or complete disc harging Activat lights Red, It lights when the battery is activat ed. If not, it goes off. Under Voltage lights Red, It lights when the battery or the output converter under-voltage output. If not, it goes off. Fault lights Red, In the fail case of over-voltage output, over-current, short circuit, It lights after the output is cut-off. If not, it goes off Button functions and use Activation Start, Press-button, Battery activation manually start. Activation Stop, Press-button, Battery activation manually quit. Battery Start, Press-button, Battery manually put into. Battery Stop, Press-button, Battery manually quit. Activated button, press the activated start-button then the converter will ge t into the battery activated state, and the discharged and activated indication lights on, and the battery discharge to the load and the discharged resistance. It is able to quit battery activated state when press the activated stop-button. If not, the converter will automatically finish battery activation Battery button, Press the battery start-button when project debugging or firstly connect the battery but no output, then the battery is used to supply power to the load. Now the disc harge indication lights. It is able to manually press the battery stop-button seconds to cut off the battery, or the battery will be automatically cut off after the battery discharge into the under-voltage breakpoint. Hold the battery start-button can urgently force the battery to output for the load when the battery voltage is lower than the under-voltage breakpoint. Note: The function of battery touch-button does not work when AC power. The time of forcing output should not be too long, so as not to damage the battery. Use of Power The power supply can work when input is AC the alternating current. The power input current to load is powered by power supply, meanwhile charge battery in constant current and voltage. After the battery is charged, power supply to floating charge state automatically, this moment, the power supply float voltage and current to normal self discharge of battery. When AC power down, the battery can also supply power, switch time. When the battery discharge to under voltage alarm, output battery under voltage signal point, at the same time under voltage indicator lamp light. When the battery discharge is lower than the under-voltage protection, the power shut off load output automatically. If need to shut off battery output in advance, can press the Manual battery quit button of the battery for manual operation in seconds or remote control the relay controlled by the CPU to make the battery remote pin BG and VG in short circuit (not less than seconds), then the battery shut off in advance. Activation of Battery When the battery is in floating charge state for a long time, the battery should to be activated to avoid battery plate passivation. It can use the relay controlled by the CPU to make the power activation pin HK and VG in short circuit (not less than 0.5 seconds), then the power into activation state, the battery discharge and supply power to the load. When the battery discharged to the battery activation, the power automatic starting work to supply the load and charge the battery. When need to withdraw from activation halfway, can press the Manual activation quit button to withdraw from activation, or use the relay controlled by the CPU to make the power pin HG and VG in short circuit (not less than 0.5 seconds), then withdraw from activation in advance. Note: The activation function does not work when the power supply is not connected to the battery or the battery voltage is lower than the battery activation. Application of activated discharge terminal RL Refer to the wiring diagram. The terminal is designed to accelerate the discharge of the battery when the battery is activated, please select the discharge resistance according to different battery capacity. When the power supply works normal, the resistance does not work, When the power source is in the activated state, the resistance is connected to the battery discharge. Choice of discharge current (recommended): Discharge current (A) 0.1 battery capacity (AH) regular load current (A). If the discharge current value is negative, then the discharge resistance can not be added. When the discharge resistance is hot, should be properly cooled down and away from the power module. Application of alarm terminal The alarm output terminal is the electronic node (see the internal diagram), and the +5V to +24V DC voltage is required to be input at the VC terminal. When an alarm occurs, the alarm node is on or off. Alarm node load capacity is mA, and the voltage derating is
- A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation 0.1 3V. This alarm node is not suitable for the load of a large power, The alarm node must be isolated from the power input, output, housing, and protection (see Figure 2), and the insulation strength is 2500VAC voltage, insulation resistance is Ω Alarm status is as follows: Alarm terminal The alarm Normal or non-active) Alarm (or activation) VC Positive input alarm POK Input loss alarm on off HOK Activated state off on VL Battery under voltage alarm off on VH Fault alarm(over-voltage) off on Use of Battery The power supply can be equipped with 30AH lead acid battery or colloidal maintenance-free battery, The battery is connected to the battery terminal(B+ B-) of the power supply. When the load current is less than the load is connected to the output terminal of the power supply. When the instantaneous load current exceeds the load can be directly connected to the battery, at this time, the power supply of discharge protection function is failure. Charge current selection of the power supply: Generally, The charge current of the battery is selected according to the battery capacity of 10% or parameters provided by battery manufacturers. The following table is for reference battery capacity (AH) charging current (A) 1.5 Battery anti-reverse connect protection (No battery reverse connection, when there is AC input.) When there is no AC input and battery reverse connection, press the battery start button, power supply will not have output, and the indicator doesn't light. When battery is reverse connected, turn on the AC input, the under-voltage will light up. In the above two cases, power supply have no output, but will not be damaged. After correct the battery's connection polarity, the power supply will work normally. Dimensions and Recommended Layout
- A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Attention Matters in Application Output please use wire that cross area is more than 2.5mm input terminal should add 10A/250VAC Fuse. Please correct connection according to the wiring diagram, do not connect wrongly, battery output terminal is strictly prohibited to connect reversely, AC input terminal is strictly prohibited connected with other terminals wrong, otherwise will cause permanent damage to power. The installation method is installed on the vertical direction with terminal down, and identification right. Connecting terminal capacity is 15A, the output and the battery terminal is applied to two terminals, otherwise it is easy to burn the connecting terminal. Alarm terminal is prohibited from overload and short-circuit, otherwise it will burn down the electronic alarm contact. To further reduce the output ripple noise, the user can parallel connection with one 220 u V electrolytic capacitor and u F multilayer Ceramic Capacitor. The output of this product is not allowed to work in parallel. The PE terminal of this product should be reliably connected to the earth, in order to improve the capability of anti-interference. Casing will distribute heat when the power is during operating, in order to ensure the power dissipation is good, please keep a certain gap around the power supply to ensure the air flow smoothly, the temperature sensitive device as far as possible from the power. Note: Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com Packing bag number: 58220034; If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 humidity<75% with nominal input voltage and rated output load; All index testing methods in this datasheet are based on our Company s corporate standards; We can provide product customization service, please contact our technicians directly for specific information; Products are related to laws and regulations: see "Features" and "EMC"; Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. Mornsun Guangzhou Science Technology Co., Ltd. Address: No. Kehui St. Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, China Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn