MB1S FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Low leakage
  • Surge overload rating: 35 amperes peak.
  • Ideal for printed circuit board. Parameter Device Units 1S 2S 4S 6S 8S Peak Repetitive Reverse Voltage 100 200 400 600 800 V Maximum RMS Bridge Input Voltage 70 140 280 420 560 V DC Reverse Voltage (Rated VR) 100 200 400 600 800 V Maximum Reverse Leakage, per leg @ rated VR TA = 25°C TA = 125°C 5.0 0.5 mA mA Maximum Forward Voltage Drop, per bridge @ 0.5 A 1.0 V I2t rating for fusing t < 8.3 ms 5.0 A2t Typical Junction Capacitance, per leg VR = 4.0 V, f = 1.0 MHz 13 pF Symbol Parameter Value Units IO Average Rectified Current @ TA = 50°C 0.5 A if(surge) Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) 35 A PD Total Device Dissipation Derate above 25°C 1.4 W mW/°C RqJA Thermal Resistance, Junction to Ambient, per leg 85 °C/W RqJL Thermal Resistance, Junction to Lead, per leg 20 °C/W Tstg Storage Tem perature Range -55 to +150 °C TJ Operating Junction Temperature -55 to +150 °C Dimensions are in: inches (mm) SOIC-4 Polarity symbols molded or marking on body 0.275(7)MAX 0.165(4.2) 0.150(3.8) 0.067(1.7) 0.057(1.3) 0.067(1.7) 0.057(1.3) 0.051(1.3) 0.035(0.9) 0.014(0.35) 0.006(0.15) 0.043(1.1) 0.027(0.7) C0.02(0.5) 0.008(0.2) 0.118(3.0) MAX 0.106(2.7) 0.09(2.3) 0.031(0.8) 0.0191(0.5) 0.106(2.7) 0.09(2.3) 0.193(4.9) 0.177(4.5) 4 3 1 2 –– + : ––

MB1S-MB8S, Rev. A Glass Passivated Bridge Rectifiers (continued) Typical Characteristics Reverse Characteristics 0 2 04 06 08 0 1 0 0 1 2 0 1 4 0 0.01 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) REVERSE CURRENT ( A) T = 100 C ºC T = 25 C ºA µ Non-Repetitive Surge Current 12 5 1 0 2 0 5 0 1 0 0 NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT (A) Forward Characteristics 0.01 0.1 FORWARD VOLTAGE (V) FORWARD CURRENT (A) T = 25 C ºA Pulse Width = 300µs 2% Duty Cycle Forward Current Derating Curve 0 25 50 75 100 125 150 175 0.25 0.5 0.75 AMBIENT TEMPERATURE ( C) FORWARD CURRENT (A) º

ACEx™ CoolFET™ CROSSVO LT™ E 2CMOS TM FACT™ FACT Quiet Series™ FAST ® FAS Tr™ G TO™ HiSeC™ The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPO RT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPRO VAL OF FAIRCHILD SEMICONDUC TOR CORPOR ATION. As used herein: ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT S TATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Formative or In Design First Production Full Production Not In Production DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILIT Y, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.