MB612-50802 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Page <1> V1.008/05/20 PCB Terminal Block Single Mold Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number Terminal Block Eurostyle, 14-26AWG MB612-50802 MB612-50803 MB612-50804 MB612-50805 MB612-50806 MB612-50807 MB612-50808 MB612-50809 MB612-50810 MB612-50811 MB612-50812 Dimensions : Millimetres (Inches) Specifications: Pitch : 5.08mm Poles : 2 to 16Poles Housing Material : PA 66 Cage Clamp : Brass, Ni Plated Contact : Brass, Tin Plated Screw Thread : M2.6, Steel, Zinc Plated Wire Size : 14AWG to 26AWG PCB Hole Diameter : 1.3mm Tightening Torque, Max. : 4.5Lb-in Operating Temperature : -40°C to +105°C Technical Data: Nominal Current lN : 16A Nominal Cross Section : 1.5mm2 Maximum Load Current : 16A Insulating Material : PA Nominal Voltage : 300V Nominal Current : 16A Note: Screw Plating: Changes are available upon request Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.