MB2505_07 RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Amperes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. MB2505 THRU MB2510 MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC = 55 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range SYMBOL VRRM VDC IO IFSM RqJA TJ, TSTG VRMS MB2505 MB251 MB252 MB254 MB256 MB258 MB2510 MB2505 MB251 MB252 MB254 MB256 MB258 MB2510 UNITS 50 200 600 Volts Volts Volts Amps 100 100 700 1000 140 200 420 600 1000 560 800 800 25.0 300 -55 to + 150 Amps OC/W RqJC 4 400 280 400 NOTES : 1. Suffix "W" for wire type. 2. Typical Thermal Resistance: Heat-sink case mounted. 2007-5 at Rated DC Blocking Voltage @TA = 25 o C @TA = 100 o C CHARACTERISTICS VF SYMBOL IR UNITS 1.1 5.0 500 uAmpsMaximum DC Reverse Current Maximum Instantaneous Forward Voltage at 12.5A DC Volts 3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
FEATURES
- Superior thermal desing * 300 amperes surge rating * 1/4" universal faston terminal * Hole thru for #8 screw * Epoxy * UL listed the recongnized component director, file #94233 : Device has UL flammability classification 94V-0 MECHANICA DISCONTINUED- L DATA "This series is replaced by the MP25 series that meets to the same fit and function parameters. The MP25 series is preferred for PCB assembly." MB-25 MB-25W Discontinued SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER
RATING AND CHARACTERISTICS CURVES ( MB2505 THRU MB2510 ) MB-25WMB-25 .480 (12.2) .425 (10.8) 1.181 (30.0) 1.102 (28.0) .673 (17.1) .633 (16.1) .673 (17.1) .633 (16.1) .033x.250 (0.8x6.4) 1.181 (30.0) 1.102 (28.0) .732 (18.6) .582 (14.8) .543 (13.8) .692 (17.6) .452 (11.5) MAX. HOLE FOR NO. 8 SCREW AC AC .042 (1.1) .080 (2.0) (11.5) DIA. TYP. .452 MAX. (15.0) .591 MAX. .732 (18.6) .692 (17.6) AC AC 1.181 (30.0) 1.102 (28.0) HOLE FOR NO.
8 SCREW
1.181 (30.0) 1.102 (28.0) .468 (11.9) .429 (10.9) .732 (18.6) .692 (17.6) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS FORWARD CURRENT, (uA) CASE TEMPERATURE, ( O 0.1 100 1000 AVERAGE FORWARD CURRENT, (A) 20 40 60 80 100 120 140150100500 100 500 3.01.5 4.5 FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE FIG.2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (A) NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT, (A) 250 300 100 200 150 2 5 10 20 50 100 FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Single Phase Half Wave 60Hz Inductive or Resistive Load 0.375" (9.5mm) Lead Length 8.3mS Single Half Sine-Wave JEDEC Method TJ = 25 O C Pulse width=300mS 1% Duty Cycle TA = 100 O C TA = 25 O C TA = 75 O C
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE