MB210-AU PANJIT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

 Plastic package has Underwriters Laboratory Flammability Classification 94V-O  For surface mounted applications in order to optimize board space  Low power loss,high efficiency  High surge capacity  Acquire quality system certificate : TS16949  AEC-Q101 qualified  Lead free in compliance with EU RoHS 2011/65/EU directives  Green molding compound as per IEC61249 Std. . (Halogen Free) Mechanical Data  Case : JEDEC DO-214AA molded plastic  Terminals : Solder plated, solderable per MIL-STD-750, Method 2026  Polarity : Color band denotes cathode end  Standard packaging : 12mm tape (EIA-481)  Approx. Weight : 0.0032 ounces, 0.092 grams Maximum Ratings and Thermal Characteristics (TA = 25 o C unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Maximum Repetitive Peak Reverse Voltage VRRM 100 V Maximum Rms Voltage VRMS 70 V Maximum Dc Blocking Voltage VDC 100 V Maximum Average Forward Current IF(AV) 2 A Peak Forward Surge Current: 8.3 ms Single Half Sine- Wave Superimposed On Rated Load IFSM 50 A Typical Junction Capacitance Measured at 1 MHZ And Applied VR = 4 V CJ 75 pF Typical Thermal Resistance (Note 3) (Note 3) (Note 2) RθJA RθJC RθJL 135 oC/W Operating Junction Temperature Range TJ -55~175 oC Storage Temperature Range TSTG -55~175 oC

June 17,2020 MB210-AU-REV.06 Page 2 Electrical Characteristics (TA = 25 o C unless otherwise noted) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNITS Forward Voltage(Note 1) VF IF = 0.5 A, TJ = 25 oC - 0.6 - V IF = 2 A, TJ = 25 oC - - 0.8 IF = 0.5 A, TJ = 125 oC - 0.49 - IF = 2 A, TJ = 125 oC - 0.62 - Reverse Current(Note 4) IR VR = 80 V, TJ = 25 oC - 0.1 - uA VR = 100 V, TJ = 25 oC - - 50 VR = 100 V, TJ = 100 oC - - 20 mA NOTES: 1. Pulse Test with PW =300µsec, 1% Duty Cycle. 3. Mounted on a FR4 PCB, single-sided copper, mini pad. 4. Short duration pulse test used to minimize self-heating effect.

June 17,2020 MB210-AU-REV.06 Page 3 RATING AND CHARACTERISTIC CURVES PEAK FORWARDSURGE CURRENT, AMPERES NO. OF CYCLE AT 60HZ 1 10 100 Fig.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Fig.3-TYPICAL REVERSE CHARACTERISTIC Fig.5-OPERATING TEMPERATURE DERATING CURVE 2010 40 60 80 100 T =25 CJ O PERCENT OF RATED PEAK REVERSE VOLTAGE ,% RE VE RS E C UR RE NT ,mA T =75 CJ O T =125 CJ O Fig.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC FORWARD VOLTAGE, VOLTS FORWARD CURRENT, AMPERES 0.01 0.1 1.0 T = 25 CA O 100 120 0 25 50 75 100 125 150 175 TJ, Junction Temperature (°C) Percent of Reverse Voltage (%) Fig.1-FORWARD CURRENT DERATING CURVEAverage Forward Rectified Current (A) oLead Temperature, C 2.0 1.0 0.5 1.5 0 75 100 125 150 17525 50 Single phase half wave 60Hz resistive or inductive load P.C.B mounted copper pad areas

June 17,2020 MB210-AU-REV.06 Page 4 Part No. Packing Code Version Packaging Information & Mounting Pad Layout SMB Dimension Unit: inch(mm) SMB Pad Layout Unit: inch(mm) Part No. Packing Code Package Type Packing Type Marking Version MB210-AU_R1_000A1 SMB 0.8K pcs / 7” reel MB210 Halogen free

June 17,2020 MB210-AU-REV.06 Page 5 Disclaimer

  • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
  • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document.
  • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
  • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
  • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
  • The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
  • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.