MB7 MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • Wide range of multipurpose boxes
  • Integral PCB guides (except MB6, MB6W and MB6G)
  • Lid retained by M3.5 screws into brass inserts
  • Employ high-performance ferrites with superior frequency characteristics
  • CMB4, MB6 and MB7 have matt finish
  • MB4 and MB6 lids retained by 6 × 4 BA screws into brass inserts

Description

These boxes are moulded in ABS to give maximum strength but can be easily punched or drilled for individual requirements and to produce a professional looking end product. They are available in black, white and light grey. MB1, MB2, MB3, MB5 and MB8 have polished finish. Printed circuit board slots are provided on certain types to allow ease of manufacture Diagram WD H Overall Dimensions Part Number & Colour Width (W) Depth (D) Height (H) Nominal Wall Thickness Rib Spacing Side (W) Rib Spacing Side (D) Black White Grey 79 61 40 1.5 20 20 MB1 MB1W MB1G 100 76 41 1.5 20 20 MB2 MB2W MB2G 118 98 45 1.5 23 33 MB3 MB3W MB3G 216 130 85 4 20 20 MB4 MB4W MB4G 150 100 60 2.5 20 32 MB5 MB5W MB5G 220 150 64 3 - - MB6 MB6W MB6G 177 120 83 2.5 23 40 MB7 MB7W MB7G 150 80 50 2.5 20 23 MB8 MB8W MB8G Dimensions : Millimetres

Page <2> V1.021/05/21 Multipurpose Boxes with Lids Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Material Data ABS material - Ronfalin 103 grade Properties Unit Test Methods ISO DIN Mechanical Properties kJ / m2 - - Charpy notched impact strength at +23 °C at -20 °C 179/2c 53453 - - - - Izod notched impact strength at +23 °C (thickness 6.4 mm) at -20 °C (thickness 6.4 mm) kJ / m2 180/3A - - - - - Tensile test Tensile strength at yield Elongation at yield N / mm2 R527/1C 53455-3-5 - - - - Flexural test Flexural strength Modulus in flexure N / mm2 2,400 178B - - 53452 - - Surface hardness Rockwell hardness Ball indention hardness R scale 110 - - 2039/2 - 2039/1 53456 Thermal Properties °C 75/A 53461/A HDT Unannealed Annealed Vicat softening temperature Flammability properties 94HB (1.5 mm) - - - - - - 306/B50 53460 UL94 - Physical Properties kg / m3 - - Density 1,050 1183/A 53479 Melt flow index 13 1133/19 53735/U Gloss 59 - 67530 Processing temperatures 200 to 230 °C - -