MB05S CITC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Dimensions in inches and (millimeters) Features■ ■ Mechanical data ■ Maximum ratings and electrical characteristics Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. O C Outline■ Save space on printed circuit board. Ideal for automated replacement. Reliable low cost construction utilizing molded plastic technology results in inexpensive product. Glass passivated chip junctions. Suffix "G" indicates Halogen-free part, ex.MB05SG. UL recognized file # E321971 Surge overload ratings to 30 amperes peak. MDS(TO-269AA)

  • Case : Molded plastic, MDS / TO-269AA
  • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026
  • Polarity : marked on body
  • Weight : 0.04 ounce, 1.0 gram
  • Epoxy:UL94-V0 rated flame retardant MB05S THRU MB10S 0.5 / 0.8A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers Operating temperatureO T ( C)J -55 ~ +150 Max. forward voltageO @0.4A, T = 25 CA V (V)F Max. DC blocking voltage V (V)R Max. RMS voltage V (V)RMS 140 280 420 560 Max. repetitive peak reverse voltage V (V)RRM 100 200 400 600 800 Marking code MB1S MB2S MB4S MB05S MB6S MB8S Symbol MB1S MB2S MB4S MB05S MB6S MB8S 100 200 400 600 800 1.0 7001000MB10S MB10S 1000 IO IFSM IR TSTG Forward rectified current Forward surge current Reverse current Storage temperature Parameter O at T = 30 CA 8.3ms single half sine-wave superimposed on rate load (JEDEC method) O V = V T = 25 CR RRM A O V = V T = 125 CR RRM A Conditions Symbol MIN. TYP. MAX. UNIT -55 +150 500 5.0 0.8 A A uA O C on glass-epoxy PCB 0.5 Document ID : DS-12B01 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C .157(4.0) .106(2.7) .276(7.0) .008(0.2) .043(1.1) .106(2.7) .193(4.9) .033(0.84) .142(3.6) .090(2.3) MAX .027(0.7) .090(2.3) .177(4.5) .022(0.56)

■ Rating and characteristic curves Document ID : DS-12B01 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C MB05S THRU MB10S 0.5 / 0.8A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers 0.1 1.0 .01 FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.1-TYPICAL FORWARD CURRENT AVERAGE FORWARD CURRENT,(A) PERCENTAGE OF PEAK REVERSE VOLTAGE, (%) 0.2 0.4 0.6 0.8 1.0 1.2 0 20 40 60 80 100 120 140 3.0 O AMBIENT TEMPERATURE ( C) DERATING CURVE REVERSE LEAKAGE CURRENT, (uA) 0 25 50 75 100 125 150 175 O T =25 CJ FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 O T =25 CJ 8.3ms Single Half Sine Wave JEDEC method Single Phase Half Wave 60Hz Resistive Or Inductive Load 0.1 1.0 .01 FIG.3-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle O T =25 CJ Aluminum Substrate Glass Epoxy PCB

http://www.citcorp.com.tw/ Tel:886-3-5600628 Fax:886-3-5600636 MB05S THRU MB10S 0.5 / 0.8A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers Document ID : DS-12B01 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C CITC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design. CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of CITC. CITC products are not authorized for use as critical components in life support devices or systems without express written approval of CITC. ■ MDS(TO-269AA) foot print Dimensions in inches and (millimeters) B 0.059 (1.50) A 0.030 (0.76) C 0.070 (1.78) B D C A D 0.226 (5.75)