MAXI SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

Description

  • Available in SAE Type 1 (cycling) and SAE Type 2 (non-cycling)
  • Multiple bimetallic resistivities available
  • Heater wire wrapped around the bimetal keeps the protector open until power is removed (Type 2 only) The MAXI BREAKER® series of circuit protectors are rated for use up to 125ºC. This patented device is available both as a cycling (SAE Type 1) and non-cycling (SAE Type 2) device. Typical placement of the MAXI BREAKER® is under the hood fuse blocks or other areas of the vehicle that house a MAXI™ Blade Fuse*. The MAXI BREAKER® protects against momentary overloads and eliminates the need for fuse replacement. Nominal Operating Voltage 14 Volts DC Typicale Voltage Drop at Operating Current 200 mV max Current Rating 10 to 50 amps @ 25ºC (in 5 amp increments) Typical Ambient Temperature Range -40ºC to 125ºC SPECIFICATIONS

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. Curves These curves are to be used only as a guide in selecting a protector for a particular application. Factors such as distance from the heat source and the method of mounting should be considered in selecting a protector. Final trip times are dependent upon terminal configuration and mounting in the application. * MAXI™ Blade Fuse is a trademark of Littelfuse® 10000 8000 6000 4000 2000 1000 800 600 400 200 100 Trip Time in Seconds 0 10 20 30 40 50 60 70 80 90 Current in Amperes Typical Maxi Breaker Trip Time Curves at 25ºC 20A 25A 30A 40A 160 150 140 130 120 110 100 -50 -30 -10 10 30 50 70 90 110 130 Temperature in ºCelsius Percent of Rated Current Typical Maxi Breaker Derating Curves All breakers will trip in this area All breakers hold in this area

www.sensata.comCopyright © 2018 Sensata Technologies, Inc Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. CONTACT US Revised 01/25/18 Americas +1 (508) 236-2551 electrical-protection-sales@ sensata.com Europe, Middle East & Africa +31743578156 info-sse@list.sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Dimensions in mm [Inch] DIMENSIONS 29.21 (1.150) 29.21 (1.150) 12.70 (.500) 8.9 (.350) 60.0º 21.60 (.850) .82 (.032) 2.54 (.100)