MAX3013EBP-T

MAX3013 STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 17

Technical content

Features

♦100Mbps Guaranteed Data Rate ♦Bidirectional Level Translation ♦VL Operation Down to +1.2V ♦Ultra-Low 0.1µA Supply Current in Shutdown ♦Low-Quiescent Current (0.1µA) ♦UCSP, QFN, and TSSOP Packages MAX3013 +1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators

Ordering Information

19-3156; Rev 2; 12/04 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. Pin Configurations continued at end of data sheet. Typical Operating Circuit appears at end of data sheet. PART TEMP RANGE PIN-PACKAGE N U M B ER O F VL → VC C T R A N SL A T O R S NUMBER OF VL ← VCC TRANSLATORS DATA RATE (Mbps) MAX3013EUP -40°C to +85°C

20 TSSOP

-40°C to +85°C 5 x 4 UCSP 100 MAX3013EGP -40°C to +85°C

20 QFN-EP*

*EP = Exposed paddle. UCSP is a trademark of Maxim Integrated Products, Inc. SPI is a trademark of Motorola, Inc. MICROWIRE is a trademark of National Semiconductor Corp.

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS

ues are at VCC = +3.3V, VL = +1.8V, TA = +25°C.) (Note 2) Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. (All voltages referenced to GND.) Continuous Power Dissipation (TA = +70°C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS POWER SUPPLIES VL Supply Range VL 1.2 VCC - 0.4 V VCC Supply Range VCC 1.65 3.6 V Supply Current from VCC IQVCC I/O V CC_ = 0, I/O V L _ = 0 or I/O V CC_ = VCC, I/O V L _ = VL 0.1 µA I/O V CC_ = 0, I/O V L _ = 0 or I/O V CC_ = VCC, I/O V L _ = VL 0.1 Supply Current from VL IQVL I/O V CC_ = 0, I/O V L _ = 0 or I/O V CC_ = VCC, I/O V L _ = VL, VL < VCC - 0.2V 0.1 100 µA VCC Tristate Output Mode Supply Current ITS-VCC TA = +25°C, EN = 0 0.03 µA TA = +25°C, EN = 0 0.1 0.2 VL Tristate Output Mode Supply Current ITS-VL TA = +25°C, EN = 0, VL = VCC - 0.2V µA TA = +25°C, EN = 0, 0.15 I/O Tristate Output Mode Leakage Current TA = +25°C, EN = 0, VL = VCC - 0.2V µA LOGIC-LEVEL THRESHOLDS I/O VL_ Input-Voltage High VIHL 2/3 x VL V I/O VL_ Input-Voltage Low VILL 1/3 x VL V I/O VCC_ Input-Voltage High VIHC 2/3 x VCC V I/O VCC_ Input-Voltage Low VILC 1/3 x VCC V EN Input-Voltage High VIH TA = +25°C 2/3 x VL V

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators ELECTRICAL CHARACTERISTICS (continued) ues are at VCC = +3.3V, VL = +1.8V, TA = +25°C.) (Note 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS EN Input-Voltage Low VIL TA = +25°C 1/3 x VL V EN Input Current TA = +25°C µA I/O VL_ Output-Voltage High VOHL I/O VL_ source current = 20µA 2/3 x VL V I/O VL_ Output-Voltage Low VOLL I/O VL_ sink current = 20µA 1/3 x VL V I/O VCC_ Output-Voltage High VOHC I/O VCC_ source current = 20µA 2/3 x VCC V I/O VCC_ Output-Voltage Low VOLC I/O VCC_ sink current = 20µA 1/3 x VCC V TIMING CHARACTERISTICS ues are at VCC = +3.3V, VL = +1.8V, TA = +25°C.) (Note 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS C IOV C C = 15p F, Fi g ur e 1 2.5 C IOV C C = 20p F, Fi g ur e 1 I/O VCC_ Rise Time tRVCC C IOV C C = 40p F, Fi g ur e 1 ns C IOV C C = 15p F, Fi g ur e 1 2.5 C IOV C C = 20p F, Fi g ur e 1 I/O VCC_ Fall Time tFVCC C IOV C C = 40p F, Fi g ur e 1 ns I/O VCC_ One-Shot Output 18.5 Ω I/O VL_ Rise Time tRVL CIOVL = 15pF, Figure 2 2.5 ns I/O VL_ Fall Time tFVL CIOVL = 15pF, Figure 2 2.5 ns I/O VL_ One-Shot Output Impedance 12.5 Ω Propagation Delay (Driving I/O VL_) I/OVL-VCC C IOV C C = 15p F, Fi g ur e 1 6.5 ns

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators Note 1: VL must be less than or equal to VCC - 0.4V during normal operation. However, VL can be greater than VCC - 0.4V during starting up and shutting down conditions. Note 2: All units are 100% production tested at TA = +25°C. Limits over the operating temperature range are guaranteed by design and not production tested. Note 3: Not production tested. Guaranteed by design. TIMING CHARACTERISTICS (continued) ues are at VCC = +3.3V, VL = +1.8V, TA = +25°C.) (Note 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Propagation Delay (Driving I/O VCC_) I/OVCC-VL C IOVL = 15p F, Fi g ur e 2 ns Part-to-Part Skew tPPSKEW C IOV C C = 15p F, C IOVL = 15p F, V C C = 2.5V , V L = 1.8V ( N ote 3) ns Propagation Delay from I/O VL_ to I/O VCC_ after EN tEN-VCC C IOV C C = 15p F, Fi g ur e 3 1000 ns Propagation Delay from I/O VCC_ to I/O VL_ after EN tEN-VL C IOVL = 15p F, Fi g ur e 4 1000 ns C IOV C C = 15p F, C IOVL = 15p F, V L > 1.8V 100 Maximum Data Rate C IOV C C = 15p F, C IOVL = 15p F, V L > 1.2V Mbps Typical Operating Characteristics (Data rate = 100Mbps, VCC = 3.3V, VL = 1.8V, TA = +25°C, unless otherwise noted.) 0.2 0.1 0.4 0.3 0.5 0.6 VL SUPPLY CURRENT vs. SUPPLY VOLTAGE MAX3013 toc02 VCC SUPPLY VOLTAGE (V) VL SUPPLY CURRENT (mA) 1.5 3.0 2.5 2.0 3.5 4.0 DRIVING I/O VL VL = 1.25V CIOVCC = 15pF 0.2 0.6 0.4 0.8 1.0 VL SUPPLY CURRENT vs. SUPPLY VOLTAGE MAX3013 toc01 VCC SUPPLY VOLTAGE (V) VL SUPPLY CURRENT (mA) 2.0 3.0 2.5 3.5 4.0 DRIVING I/O VL VL = 1.8V CIOVCC = 15pF VCC SUPPLY CURRENT vs. SUPPLY VOLTAGE MAX3013 toc03 VCC SUPPLY VOLTAGE (V) VCC SUPPLY CURRENT (mA) 2.0 3.0 2.5 3.5 4.0 DRIVING I/O VL VL = 1.8V CIOVCC = 15pF

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators Typical Operating Characteristics (continued) (Data rate = 100Mbps, VCC = 3.3V, VL = 1.8V, TA = +25°C, unless otherwise noted.) VCC SUPPLY CURRENT vs. SUPPLY VOLTAGE MAX3013 toc04 VCC SUPPLY VOLTAGE (V) VCC SUPPLY CURRENT (mA) 1.5 3.0 2.5 2.0 3.5 4.0 DRIVING I/O VL VL = 1.25V CIOVCC = 15pF 2.0 2.4 3.2 2.8 3.6 4.0 VL SUPPLY CURRENT vs. TEMPERATURE MAX3013 toc05 TEMPERATURE (°C) VL SUPPLY CURRENT (mA) -40 -15 DRIVING I/O VCC CIOVL = 15pF -40 -15 VCC SUPPLY CURRENT vs. TEMPERATURE MAX3013 toc06 TEMPERATURE (°C) VCC SUPPLY CURRENT (mA) DRIVING I/O VCC CIOVL = 15pF 0.2 0.6 0.4 0.8 1.0 VL SUPPLY CURRENT vs. CAPACITIVE LOAD ON I/O VCC MAX3013toc07 CAPACITIVE LOAD (pF) VL SUPPLY CURRENT (mA) DRIVING I/O VL VCC SUPPLY CURRENT vs. CAPACITIVE LOAD ON I/O VCC MAX3013 toc08 CAPACITIVE LOAD (pF) VCC SUPPLY CURRENT (mA) DRIVING I/O VL 0.3 0.9 0.6 1.2 1.5 RISE/FALL TIME vs. CAPACITIVE LOAD ON I/O VCC MAX3013 toc09 CAPACITIVE LOAD (pF) RISE/FALL TIME (ns) DRIVING I/O VL tFALL tRISE

Typical Operating Characteristics (continued) (Data rate = 100Mbps, VCC = 3.3V, VL = 1.8V, TA = +25°C, unless otherwise noted.) MAX3013 +1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators 0.2 0.6 0.4 0.8 1.0 RISE/FALL TIME vs. CAPACITIVE LOAD ON I/O VL MAX3013 toc10 CAPACITIVE LOAD (pF) RISE/FALL TIME (ns) DRIVING I/O VCC tFALL tRISE PROPAGATION DELAY vs. CAPACITIVE LOAD ON I/O VCC MAX3013 toc11 CAPACITIVE LOAD (pF) PROPAGATION DELAY (ns) DRIVING I/O VL tPHL tPLH PROPAGATION DELAY vs. CAPACITIVE LOAD ON I/O VL MAX3013 toc12 CAPACITIVE LOAD (pF) PROPAGATION DELAY (ns) DRIVING I/O VCC tPHL tPLH TYPICAL I/O VCC DRIVING MAX3013 toc13 I/O VCC 1V/div I/O VL 1V/div 4ns/div 150 160 180 170 190 200 tEN-VCC vs. TEMPERATURE (CIOVCC = 15pF) MAX3013 toc14 TEMPERATURE (°C) tEN-VCC (ns) -40 -15 100 tEN-VL vs. TEMPERATURE (CIOVL = 15pF) MAX3013 toc15 TEMPERATURE (°C) tEN-VL (ns) -40 -15

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators Pin Description PIN BUMP TSSOP QFN UCSP NAME FUNCTION I/O VL1 Input/Output 1, Referenced to VL I/O VL2 Input/Output 2, Referenced to VL I/O VL3 Input/Output 3, Referenced to VL I/O VL4 Input/Output 4, Referenced to VL VL EN Enable Input. If EN is pulled low, all inputs/outputs are in tristate. Drive EN high (VL) for normal operation. I/O VL5 Input/Output 5, Referenced to VL I/O VL6 Input/Output 6, Referenced to VL I/O VL7 Input/Output 7, Referenced to VL I/O VL8 Input/Output 7, Referenced to VL I/O VCC8 Input/Output 8, Referenced to VCC I/O VCC7 Input/Output 7, Referenced to VCC I/O VCC6 Input/Output 6, Referenced to VCC I/O VCC5 Input/Output 5, Referenced to VCC GND Ground VCC I/O VCC4 Input/Output 4, Referenced to VCC I/O VCC3 Input/Output 3, Referenced to VCC I/O VCC2 Input/Output 2, Referenced to VCC I/O VCC1 Input/Output 1, Referenced to VCC

Figure 1. Driving I/O VL Test Circuit and Timing

Figure 2. Driving I/O VCC Test Circuit and Timing

and VL, set the logic levels on either side of the device. data rate of 100Mbps for VL > +1.8V. load on the VL side, yet the device does not latch up. operating voltage range (see the Timing Characteristics). Typical Input Current vs. Input Voltage. The MAX3013 I/O was designed to drive CMOS inputs. MAX3379E/MAX3390E–MAX3393E data sheet. Figure 5. MAX3013 Simplified Diagram (1 I/O line)

the MAX3013 I/O on both sides in tristate output mode. Drive EN to logic high (VL) for normal operation. close to the power-supply input pins as possible. *RIN = 4kΩ WHEN DRIVING VL SIDE. RIN = 150Ω WHEN DRIVING VCC SIDE. Figure 6. Typical IIN vs. VIN

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators Chip Information TRANSISTOR COUNT: 1447 PROCESS: BiCMOS I/O VL3 I/O VL2 I/O VL1 I/O VCC1 I/O VCC2 I/O VL7 I/O VL8 I/O VCC8 I/O VCC7 I/O VCC6 I/O VCC5 GND VCC I/O VCC4 I/O VCC3 I/O VL6 I/O VL5 EN **EXPOSED PADDLE VL I/O VL4 MAX3013 5mm x 5mm QFN TOP VIEW MAX3013

20 UCSP

(BOTTOM VIEW) I/O VCC4 I/O VCC2 VCC GND I/O VCC3 I/O VCC1 I/O VCC5 I/O VCC7 I/O VL3 I/O VL1 I/O VL5 I/O VL7 I/O VL4 I/O VL2 VL EN I/O VCC6 I/O VCC8 I/O VL8 I/O VL6 B A C D Pin Configurations (continued)

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators

Package Information

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) TSSOP4.40mm.EPS

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) 5x4 UCSP.EPS I 21-0095 PACKAGE OUTLINE, 5x4 UCSP

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) 32L QFN.EPS

+1.2V to +3.6V, 0.1µA, 100Mbps, 8-Channel Level Translators Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 17 © 2004 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products, Inc. Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.)