DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Differential Remote-Voltage Sensing
  • 3V to 5.5V Input Supply Range
  • I2C-Controlled 0.5V to 1.5875V Output Voltage Range
  • 2.2MHz Operation
  • ±2% Output-Voltage Accuracy
  • Power-Good Output
  • Current-Mode, Forced-PWM, and Skip Operation
  • Proven PCB Layout
  • Fully Assembled and Tested Quick Start Recommended Equipment
  • MAX20010 EV kit
  • 6V, 3A DC power supply
  • Electronic load capable of 6A
  • Digital voltmeter (DVM) Procedure The EV kit is fully assembled and tested. Follow the steps below to verify board operation. Caution: Do not turn on supplies until all connections are completed. 1) Set the power supply to 5V. Disable the power supply. 2) Verify that jumper JU2 has a shunt across pins 1-2 and jumpers JU1 and JU3 are open. 3) Connect the power supply between the PVDD and nearest PGND test points. 4) Connect the electronic load between the SD0 and nearest PGND test points. 5) Connect the DVM between the SD0 and nearest PGND test points. 6) Turn on the power supply. 7) Enable the electronic load. 8) Verify that the voltage at the SDO output pad is approximately 1V. Disable the power supply. Detailed Description of Hardware Enable (EN) Place a shunt across pins 1-2 on jumper JU2 for normal operation. To place the device into shutdown mode, place the shunt across pins 2-3 on JU2. See Table 1 for jumper settings. 19-7588; Rev 4; 5/19 Ordering Information appears at end of data sheet.

Table 1. EN Configuration (JU1)

PVDD. See Table 2 for bit description. The EV kit provides jumper JU1 to set the ADDR register. IC data sheet for more details on I 2C slave address. voltage is outside the PG_UV/OV thresholds. Table 4 in the MAX20010C/MAX20010D IC data sheet. Table 2. SYNC Settings

Figure 1. MAX20010 EV Kit Schematic

7 PGND

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. © 2017 Maxim Integrated Products, Inc. │ 6 Evaluates: MAX20010C, MAX20010DMAX20010 Evaluation Kit REVISION NUMBER REVISION DATE DESCRIPTION PAGES CHANGED 0 4/15 Initial release — 1 6/15 Updated Figure 1 3 2 11/17 Updated the Component List (C1, C2, C3, C4, and U1) 2 3 3/19 Updated references to MAX20010 to indicate that EV kit evaluates MAX20010C and MAX20010D 1–5 4 5/19 Updated General Description and Quick Start 1

Revision History

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.