MAAVSS0005 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- 12-dB Attenuation at 1 GHz
- Low Intermodulation Products
- Low DC Power Consumption
- Single Voltage Control: 0 to -4 Volts
- Nanosecond Switching Speed
- Temperature Range: -40°C to + 85°C
- Lead-Free SOT-143 Package
- 100% Matte Tin Plating over Copper
- Halogen-Free “Green” Mold Compound
- 260°C Reflow Compatible
- RoHS* Compliant Version of AT-259
Description
M/A-COM’s MAAVSS0005 is a GaAs MMIC voltage variable absorptive attenuator in a lead-free SOT-143 4-lead surface mount plastic package. The MAAVSS0005 is ideally suited for use where attenuation fine tuning, fast switching and very low power consumption are required. Typical applications incl ude radio, cellular, GPS equipment and other automatic gain/level control circuits. The MAAVSS0005 is fabricated with a monolithic GaAs MMIC using a mature 1 micron process. The process features full chip passivation for increased performance and reliability. Functional Schematic
Ordering Information
MAVVSS0005TR-3000 3000 piece reel Note: Reference Application Note M513 for reel size information. Pin Configuration Pin No. Function Pin No. Function
1 Ground 3 RF2
2 VC 4 RF1
Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Input Power +21 dBm Control Voltage -8.5 V < VC < +5 V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combinatio n of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
Voltage Variable Absorptive Attenuator DC - 2.0 GHz MAAVSS0005 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions3 Frequency Units Min Typ Max Insertion Loss — DC - 0.1 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz dB dB dB dB 2.9 3.0 3.2 3.4 3.1 3.2 3.5 3.8 Flatness (Peak to Peak) 5 dB Attenuation 10 dB Attenuation 15 dB Attenuation DC - 2.0 GHz DC - 2.0 GHz DC - 2.0 GHz dB dB dB + 0.2 + 2.3 + 7.0 Output Impedance — — Ohms — 50 — VSWR — DC - 2.0 GHz Ratio — 2.1:1 — Trise, Tfall 10% to 90% RF, 90% to 10% RF — nS — 3 — Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF — nS — 5 — Transients In Band — mV — 10 — IP2 Measured Relative to Input Power (For two-tone Input Power Up to +5 dBm)
0.05 GHz
0.5 - 2.0 GHz dBm dBm IP3 Measured Relative to Input Power (For two-tone Input Power Up to +5 dBm) 0.5 - 2.0 GHz dBm dBm 3. Control voltage: 0 to -4 volts @ 20 µA typical. Lead-Free SOT-143† † Reference Application Note M538 for lead-free solder reflow recommendations. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
Voltage Variable Absorptive Attenuator DC - 2.0 GHz MAAVSS0005 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Typical Performance Curves Insertion Loss vs. Frequency Attenuation vs. Frequency VSWR vs. Frequency Attenuation vs. Control Voltage, F = 950 MHz 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) Control Voltage (V) +25°C -40°C +85°C Frequency (GHz) Frequency (GHz)