MA44700 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Surface Mount Packages (SOT-23,SC-79)
  • Low transition times
  • SPC Process for Superior C-V Repeatability
  • Tape and Reel Packaging
  • Designed for Commercial Wireless Applications

Description

The MA44700 series of Step Recovery diodes is designed for use in low power multipliers with output frequencies of up to 5 GHz. These Step Recovery diodes generate harmonics by storing a charge as the diode is driven to forward conductance by the positive voltage of the input signal. When the signal reverses polarity, this charge is extracted. The Step Recovery diode will appear as a low impedance cur- rentsource until all the charge is extracted, then it will “snap” to a higher impedance. This causes a voltage pulse to form in the impulse circuit of the multiplier. Step Recovery diodes make excellent high order multipliers such as comb gen- erators. They are also useful as efficient moderate power X2-X4 multipliers.

Applications

The MA44700 series step recovery are useful for surface mount low power applications. Absolute Maximum Ratings @ TA=+25 °C (Unless Otherwise Noted) 1 1. Operation of this device above any one of these parameters may cause permanent damage. 2. Please refer to application note M 538 for surface mounting instructions Parameter Absolute Maximum Operating Temperature -65 °C to +125 °C Storage Temperature -65 °C to +125 °C Reverse Voltage 30V Forward Bias Current 50 mA Power Dissipation 250 mW Part Number (non-RoHs) RoHs Compliant Available Part Numbers CT

2 Reverse Voltage Nominal

(pF) (V) (nS) (pS) (GHz) f=1 MHz, VR=6.0V Ir =10 uA Min. Max. Min. Typical Max MA44767-287T MAVR-044767-0287AT MA44768-287T MAVR-044768-0287AT MA44769-287T MA144769-287T MAVR-044769-12790T 0.8 1.2 30 20-50 150 0.1-1 1-5 (GHz) 1 The prefix defines package style, configuration and packaging information. Contact representative for complete part identification.

2 Capacitance @ 1 MHz

Typical Capacitance vs. Bias (V) freq=1MHz 0 5 10 15 20 25 30 Bias(V) Capacitance (pF) MA44768 MA44769 MA44767

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Also Offering RoHs Compliant Surface Mount Low Power Step Recovery Diodes V4 MA44700 Series Case Styles F D H J A G L C E B K N M SOT-23 (Case Style 287) INCHES MILLIMETERS A ⎯ 0.048 ⎯ 1.22 B ⎯ 0.008 ⎯ 0.20 C ⎯ 0.040 ⎯ 1.00 D 0.013 0.020 0.35 0.50 E 0.003 0.006 0.08 0.15 F 0.110 0.119 2.80 3.00 G 0.047 0.056 1.20 1.40 H 0.037 typical 0.95 typical J 0.075 typical 1.90 typical K ⎯ 0.103 ⎯ 2.60 L ⎯ 0.024 ⎯ 0.60 DIM. GRADIENT M 10° max.1 N 2° . . .30° SOT-23 Case Style 287 SC-79 Case Style 1279 INCHES MILLIMETERS A 0.020 0.028 0.50 0.71 B 0.003 0.008 0.08 0.20 C 0.006 0.010 0.15 0.25 D 0.010 0.014 0.25 0.36 E 0.059 0.067 0.08 0.15 F 0.043 0.051 1.50 1.30 G 0.011 0.012 0.28 0.30 H 0.037 typical 0.043 0.94 1.09 D E F Cathode Mark B C Seating Plane 10° Max A 10° Max G H Topview SC-79 (Case Style 1279)

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Also Offering RoHs Compliant Surface Mount Low Power Step Recovery Diodes V4 MA44700 Series Mounting Information The illustration indicates the recommended mounting pad configuration for the SOT-23 and SC-79 packages. Solder paste containing flux should be screened onto the pads to a thickness of 0.005- 0.007 inches. The plastic package is placed in position, firmly adhering to the solder paste. Permanent attachment is performed by a reflow soldering procedure during which the tab temperature does not exceed +275 °C and the body temperature does not exceed +250 °C, for standard models and +260 °C for the RoHS compliant devices. Please refer to Application Note M538 for surface mounting instructions. SC-79 0.020 0.50 0.053 1.35 inches mm Dimenstions: 0.020 0.50 0.75 1.9 .037 0.95 .035 0.90 .090 2.2 .030 0.80 inches mm Dimenstions: min. min. SOT-23 Package Configuration SOT-23 Case Style 287 SC-79 Case Style 1279