MAVR-0003 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

 Lead-Free Surface Mount Package (SOD-323)  High Capacitance Ratio at Low Voltages  High Q at Low Voltages  SPC Process for Superior C-V Repeatability  Tape and Reel Packaging  Designed for Commercial Wireless Applications  RoHS* Compliant with 260°C. Reflow Capability

Description

The MAVR -0003 series are ion -implanted, hyperabrupt junction, silicon tuning varactors offered in a SOD -323 surface mount packages This series of varactors is designed for high capacitance ratio and low voltage operation. Each varactor type has a better than 3:1 capacitance ratio between 0.5 V and 3.0 V. The MAVR -0003 series tuning varactors are useful for wide band tuning and low phase noise applications where the supply voltage is limited to 5 volts or less. These varactors have been specifically designed to cover wireless application bands up to the 2.4 GHz WLAN band. Applications include VCOs and voltage tuned filters. Ordering Information1 Part Number Package MAVR-000320-11410T SOD-323 MAVR-000340-11410T SOD-323 MAVR-000350-11410T SOD-323 *Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1. Reference Application Note M513 for reel size information. 2. The prefix defines package style, configuration and packaging information. Contact representative for complete part identification. Package Style Typical Device Selection by Frequency 350 FREQUENCY (GHz) JCT NMT AMPS TACS NMT IS-136/95 GSM PDC CT2 Active Pagers DECT PHP DCS1800 WLAN GPS PCS SMR 340 330 320

Varactor Diodes, Si Hyperabrupt Low-Voltage / Wide Band Rev. V2 MAVR-0003 Series 2 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Absolute Maximum Ratings3,4 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. MACOM does not recommend sustained operation near these survivability limits. Parameter Absolute Maximum Reverse Voltage 12 V Forward Current 50 mA Total Power Dissipation 250 mW Operating Temperature -65°C to +125°C Storage Temperature -65°C to +150°C Electrical Specifications: TA = +25 °C Breakdown Voltage @ IR = 10 mA, Vb = 12 V Minimum Reverse Leakage Current @ VR =10 V, IR = 100 nA Maximum Part Number CT @ 1 MHz Capacitance Ratio Q Factor @ 50 MHz VR = 0.5 V (pF) VR = 3.0 V (pF) CT 0.5 / CT 3.0 VR = 2.0 V Spice Model Part Number CJ0 (pF) VJ (V) M MAVR-000320 77.4 11.71 6.51 MAVR-000340 25.3 14.25 7.41 MAVR-000350 15.7 14.55 7.26 Ls Cp Cj Rs Package Parasitics Intrinsic Diode Model: N = 1.1 CJ0 = (see table below) VJ = (see table below) FC = 0.5 BV = 12.0 V M = (see table below) Parasitics: Cp = 0.15 pF Ls = 1.4 nH

Varactor Diodes, Si Hyperabrupt Low-Voltage / Wide Band Rev. V2 MAVR-0003 Series 3 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Typical Performance Curves Total Capacitance vs. Reverse Voltage at 1 MHz Nominal Q at 50 MHz vs. Reverse Voltage Nominal Change in Capacitance with temperature 200 400 600 800 1000 0 1 2 3 4 5 6 Reverse Voltage (V) 100 0.1 1 10 MAVR-000320 MAVR-000340 MAVR-000350 Reverse Voltage (V) 100 1000 0.1 1 10 MAVR-000320 MAVR-000340 MAVR-000350 Reverse Voltage (V)

Varactor Diodes, Si Hyperabrupt Low-Voltage / Wide Band Rev. V2 MAVR-0003 Series 4 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Mounting Information Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity These devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. The illustration indicates the recommended mounting pad configuration for the SOD -323 package. Solder paste containing flux should be screened onto the pads to a thickness of 0.005 - 0.007 inches. The plastic package is placed in position, firmly adhering to the solder paste. Please refer to Application Note M538 for surface mounting instructions. SOD-323 (Case Style 1141) 0.030 0.80 .090 2.2 0.030 0.80 inches mm D im enstions: 0.030

0.80 SOD-323 (Case Style 1141)

F D H G C E A B A — 0.043 — 1.1 B — 0.004 — 0.1 C — 0.008 — 0.2 D 0.010 0.016 0.25 0.41 E 0.003 0.006 0.07 0.15 F 0.063 0.075 1.6 1.9 G 0.045 0.057 1.14 1.45 H 0.091 0.106 2.3 2.7

Varactor Diodes, Si Hyperabrupt Low-Voltage / Wide Band Rev. V2 MAVR-0003 Series 5 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A -COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale.