MASY-007715-113000 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Low phase noise
- Fixed frequency applications
- Surface mount package
Description
The MASY-007715-11300 provides a 1300 MHz out- put phase locked to an external reference signal. The fully integrated design incorporates a VCO, PLL and loop filter. Frequency control is handled inter- nally by a microcontroller. This is all contained within a convenient surface mount package. Electrical Specification (Applies over the frequency range @ +25 °C, output and input load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values.) Parameter Min Typ Max Units Condition Frequency 1300 MHz Over TOP - See Note 1. RF Output power +9 +12 +15 dBm Output Return Loss 12 dB Output Harmonics -35 -20 dBc Spurious -70 -60 dBc Phase Noise (Noise <= 1kHz offset dependent upon external reference) -90 dBc/Hz Offset 1kHz -100 -95 dBc/Hz Offset 10kHz -125 -120 dBc/Hz Offset 100kHz -143 -135 dBc/Hz Offset 1MHz External Ref 100 MHz See Note 2. Alternative reference frequencies available, contact factory for details Lock Monitor DVCC - 0.4 DVCC Volt In Lock 0 0.4 Volt Out of Lock AVCC DC Supply voltage +4.75 +5 +5.25 Volt AVCC DC Current 70 85 mA AVcc = +5V DVCC DC Supply voltage +4.75 +5 +5.25 Volt DVCC DC Current 15 25 mA DVcc = +5V Note 1: TOP = -40°C ~ +85°C Case operating temperature Note 2: External Reference, 0dBm min input power, with stability of 20 ppm (max) over temperature. Reference phase noise: -98 dBc/Hz @ 10 Hz, -110 dBc/Hz @ 100 Hz, -120 dBc/Hz @ 1 kHz
Phase Locked Oscillator, SMT, 1300 MHz M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A -COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A -COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. MASY-007715-113000 Mechanical Pin Assignment Pin Number Assignment
1 DVCC
4 LD (Lock Detect)
8 REF_IN (Reference Input)
11 NC (No Connection)
14 RF_Out
16 AVCC
5,6,7,8 NC or GND All other pins GND Lid GND Parameter Min Max Units Case Operating Temperature (TOP) -40 +85 °C Storage Temperature -45 +120 °C Environmental