MASW-007074-000100 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Typical Isolation: 32 dB (2,000 MHz)
- Typical Insertion Loss: 2.0 dB (2,000 MHz)
- Integral ASIC TTL/CMOS Driver
- Low DC Power Consumption
- 50 Ohm Nominal Impedance
- Tape and Reel Packaging Available
- Test Boards Available
- Lead-Free SOW-24 Package
- 100% Matte Tin Plating over Copper
- Halogen-Free “Green” Mold Compound
- 260°C Reflow Compatible
- RoHS* Compliant Version of SW65-0214
Description
M/A-COM's MASW-007074-000100 is a GaAs MMIC absorptive SP3T switch with an integral silicon ASIC driver. This device is in a 24-lead plastic package. This switch offers excellent broadband performance and repeatability from DC to 3 GHz, while maintaining low DC power dissipation. The MASW- 007074-000100 is ideally suited for wireless infrastructure applications. Also available in ceramic package with improved performance.
Ordering Information
MASW-007074-000100 Bulk Packaging MASW-007074-0001TR 1000 piece reel MASW-007074-0001TB Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Block Diagram Pin Configuration Pin No. Function Pin No. Function
1 RFC 13 C1
2 GND 14 C3
3 GND 15 GND
4 GND 16 GND
5 GND 17 GND
6 RF2 18 GND
7 GND 19 RF1
8 VEE 20 GND
9 GND 21 GND
10 VCC 22 RF3
11 GND 23 GND
12 C2 24 GND
- Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. PIN 1 RFC GND GND GND GND RF2 GND VEE GND RF3 GND GND RF1 GND GND PIN 24 GND GND GND C1 PIN 13 GND VCC GND PIN 12 C2
GaAs SP3T Absorptive Switch with ASIC Driver, DC-3.0 GHz Rev. V4 MASW-007074-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Units Min Typ Max Insertion Loss DC - 3.0 GHz dB — 2.0 2.3 Isolation (All arms off) DC - 3.0 GHz dB 30 32 — VSWR DC - 3.0 GHz On Off 1.7:1 2.2:1 2.4:1 2.4:1 Trise Tfall Ton Toff Transients 10%/90%, 90%/10% 1 50% TTL to 90%/10% RF In-band (peak to peak) ns ns mV 150 150 1 dB Compression .05 GHz .5 - 3.0 GHz dBm dBm +20 +27 Input IP3 Two tone inputs 0.05 GHz up to +5 dBm 0.5 - 3.0 GHz dBm dBm +35 +46 VIL VIH LOW-level input voltage HIGH-level input voltage V V 0.0 2.0 0.8 5.0 lin (Input Leakage Current) Vin = VCC or GND uA -1.0 — 1.0 Icc (Quiescent Supply Current) Vcntrl = VCC or GND uA — 250 400 ΔIcc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V mA — — 1.0 IEE VEE min to max, Vin = VIL or VIH mA -1.0 -0.2 — 1. Decoupling capacitors (.01 µF) ar e required on the power supply lines. Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Max. Input Power
0.05 GHz
0.5 - 3.0 GHz +27 dBm +34 dBm VCC -0.5V ≤ VCC ≤ +7.0V VEE -8.5V ≤ VEE ≤ +0.5V VCC - VEE -0.5V ≤ VCC - VEE ≤ 14.5V Vin5 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. When the RF input is applied to the terminated port, the absolute maximum power is +30 dBm. 5. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electric ity. Proper ESD control techniques should be used when handling these devices. Truth Table TTL Control Input C1 C3 RF1 RF3 1 0 On Off 0 0 Off Off RF Common To: RF2 Off On 0 0 1 Off Off On 0 = TTL Low; 1 = TTL High
GaAs SP3T Absorptive Switch with ASIC Driver, DC-3.0 GHz Rev. V4 MASW-007074-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Isolation Loss vs. Frequency RFC VSWR vs. Frequency RF1-RF3 VSWR vs. Frequency Insertion Loss vs. Frequency 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) Insertion Loss (dB) -55C 25C 85C Frequency (GHz) Isolation (dB) 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Frequency (GHz) RFC VSWR 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Frequency (GHz) RF1 - RF3 VSWR ON OFF Typical Performance Curves
GaAs SP3T Absorptive Switch with ASIC Driver, DC-3.0 GHz Rev. V4 MASW-007074-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Lead-Free, SOW-24† † Reference Application Note M538 for lead-free solder reflow recommendations.