MASW-007071-000100

MASW-007071-000100 MA-COM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• Operates DC - 4 GHz on Single Supply
• ASIC TTL / CMOS Driver
• Low DC Power Consumption
• 50 Ohm Nominal Impedance
• Test Boards are Available
• Tape and Reel are Available
• Lead-Free 4 x 6 mm PQFN Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of SW90-0002

Description

M/A-COM's MASW-007071-000100 is a SPDT ab- sorptive pHEMT switch with integral TTL driver. This device is in an PQFN plastic surface mount package. This switch offers excellent broadband performance and repeatability from DC to 4 GHz, while maintaining low DC power dissipation. The MASW-007071-000100 is ideally suited for wireless infrastructure applications.

Ordering Information

MASW-007071-000100 Bulk Packaging MASW-007071-0001TR 1000 piece reel MASW-007071-0001TB Sample Test Board Note: Reference Application Note M513 for reel size information. Pin Configuration1,2,3,4 Pin No. Function Pin No. Function

1 NC 17 NC

2 GND 18 C1

3 RFC 19 NC

4 GND 20 VCC

5 NC 21 NC

6 NC 22 NC

7 GND 23 CP1

8 RF1 24 CP2

9 GND 25 NC

10 NC 26 VEE

11 NC 27 NC

12 VEE 28 NC

13 NC 29 NC

14 VCC 30 GND

15 NC 31 RF2

16 NC 32 GND

• Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1. NC = No Connection 2. VEE is internally generated and must remain isolated from external power supplies. Generated noise is typical of switching DC-DC Converters. 3. Connections and external co mponents shown in functional schematic are required. 0.1 µF Capacitors need to be located near pins 20 & 26. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) Truth Table (Switch) Control Input Condition of the Switch C1 RF1 RF2

0 Off On

1 On Off

“0” = TTL Low “1” = TTL High

• North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SPDT Switch, Absorptive, Single Supply, DC-4.0 GHz Rev. V4 MASW-007071-000100 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss RFC—RF1,RF2 (Logic per truth table) DC - 4.0 GHz dB — — 1.8 Isolation RF1—RF2 (All Logic “0”) DC - 4.0 GHz dB 30 — — VSWR On (RFC,RF1, RF2) (Logic per truth table) DC - 4.0 GHz Ratio — — 2.0:1 VSWR Off (RF1, RF2) (Logic per truth table) DC - 4.0 GHz Ratio — — 1.8:1 1 dB Compression —

50 MHz

0.5 - 4.0 GHz dBm dBm Input IP3 Two-tone inputs up to +5 dBm 50 MHz 0.5 - 4.0 GHz dBm dBm Ton (50% Control to 10% RF) — ns — 31 — Toff (50% Control to 90% RF) — ns — 19 — Trise (10% to 90% RF) — ns — 6 — Tfall (90% to 10% RF) — ns — 2 — Vcc — — V 4.5 5.0 5.5 VIL VIH LOW-level input voltage HIGH-level input voltage V V 0.0 2.0 0.8 5.0 lin (Input Leakage Current) Vin = VCC or GND — uA -1.0 — 1.0 Icc5 Vcc min to max, Logic “0” or “1” — mA — 5 8 Turn-on Current6 For guaranteed start-up — mA — — 125 Switching Noise Generated from DC-DC Converter with recommended capacitors

3.5 MHz dBm — -93 —

Thermal Resistance θjc — — °C/W — 15 — Switching Speed ∆Icc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V — mA — — 1.0 5. During turn-on, the device requires an initial start up current (Icc) specified as “Turn-on Current”. Once operational, Icc will drop to the specified levels. 6. The DC-DC converter is guaranteed to start in 100 µs as long as the power supplies have the maximum turn-on current available for start-up.

• North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SPDT Switch, Absorptive, Single Supply, DC-4.0 GHz Rev. V4 MASW-007071-000100 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Absolute Maximum Ratings7,8 Parameter Absolute Maximum Max. Input Power

0.05 GHz

0.5 - 4.0 GHz +27 dBm +34 dBm VCC -0.5V ≤ VCC ≤ +6.0V Vin10 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC 7. Exceeding any one or combination of these limits may cause permanent damage to this device. 8. M/A-COM does not recommend sustained operation near these survivability limits. 9. When the RF input is applied to the terminated port, the absolute maximum power is +30 dBm. 10.Standard CMOS TTL interface, latch-up will occur if logic sig- nal is applied prior to power supply. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electric ity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. Recommended PCB Configuration11 11. Application Note S2083 is av ailable on line at www.macom.com

• North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SPDT Switch, Absorptive, Single Supply, DC-4.0 GHz Rev. V4 MASW-007071-000100 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Functional Schematic12 12. Dual Supply Operation will eliminate the start-up current me ntioned in Note 5. It will also eliminate spurious signals caused by the DC-DC converter that are present in single supply operation. Isolation (dB) vs. Frequency Typical Performance Curves Insertion Loss vs. Frequency 0.0 0.4 0.8 1. 2 1. 6 2.0 0 1 000 2000 3000 4000 Fre qu e n cy (MHz ) Insertion Loss (dB) 0 1 000 2000 3000 4000 Fre qu e n cy (MHz ) Isolation (dB) Ou t-Ou tRFC-RFn

• North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SPDT Switch, Absorptive, Single Supply, DC-4.0 GHz Rev. V4 MASW-007071-000100 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. On VSWR vs. Frequency VSWR (Terminations) vs. Frequency 1. 0 0 1. 2 0 1. 4 0 1. 6 0 1. 8 0 2.00 0 1 000 2000 3000 4000 Fre qu e n cy (MHz ) VSWR RF1 , RF2 RFC 1. 0 0 1. 2 0 1. 4 0 1. 6 0 1. 8 0 2.00 0 1 000 2000 3000 4000 Fre qu e n cy (MHz ) VSWR RF1 ,RF2 Typical Performance Curves CSP-1, Lead-Free 4 x 6 mm, 32-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations.