MASW-004100-1193 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
♦ Ultra Broad Bandwidth: 50MHz to 26GHz ♦ 0.9 Insertion Loss , 34dB Isolation at 20GHz ♦ 50nS Switching Speed ♦ Reliable, Fully Monolithic, Glass Encapsulated Construction ♦ +33dBm Power Handling ♦ RoHS Compliant
Description
The MASW-004100-1193 is a SP4T, series-shunt, broad band, PIN diode, switch made with M/A-COM Tech’s unique HMICTM (Heterolithic Microwave Inte- grated Circuit) process, US Patent 5,268,310. This process allows for the incorporation of silicon pedes- tals that form the series and shunt diodes or vias by imbedding them in a low loss, low dispersion glass. This hybrid combination of silicon and glass gives HMIC switches exceptional low loss and remarkably high isolation through lo w millimeter-wave frequen- cies.
Applications
This high performance switch is suitable for use in multi-band ECM, radar, a nd instrumentation control circuits where high isolation to insertion loss ratios are required. With a standard +5V/-5V, TTL con- trolled PIN diode driver, 50nS switching speeds are achieved. Absolute Maximum Ratings TAMB = +25°C ( Unless Otherwise Specified ) Notes: Exceeding these limits may cause permanent damage. Parameter Value Operating Temperature -65°C to +125°C Storage Temperature -65°C to +150°C RF C.W. Incident Power (± 20mA) +33dBm Bias Current ( Forward ) ± 20mA Applied Voltage ( Reverse ) -25 Volts J3 J4 Maximum operating conditions for the combina- tion of RF Power, D.C. Bias, and temperature: +33dBm, @ 15mA/Diode @ +85°C
HMIC™ SP4T Silicon PIN Diode Switch ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Electrical Specifications TAMB = +25oC, ± 20mA Bias Current (On-Wafer Measurements) Control Level ( DC Current ) at Port Condition of RF Output Condition of RF Output Condition of RF Output Condition of RF Output J2 J3 J4 J5 J1-J2 J1-J3 J1-J4 J1-J5 -20mA +20mA +20mA +20mA Low Loss Isolation Isolation Isolation +20mA -20mA +20mA +20mA Isolation Low Loss Isolation Isolation +20mA +20mA -20mA +20mA Isolation Isolation Low Loss Isolation +20mA +20mA +20mA -20mA Isolation Isolation Isolation Low Loss Typical Driver Connections Parameter Frequency Minimum Nominal Maximum Units Insertion Loss 20 GHz 0.9 1.3 dB Isolation 20 GHz 28 34 dB Input Return Loss 20 GHz 15 dB Output Return Loss 20 GHz 15 dB Switching Speed1 10 GHz 50 nS Notes: Typical switching speed is measured from 10% to 90% of detected RF voltage driven by a TTL compatible driver. Driver output parallel RC network uses a capacitor between 390pF – 560pF and a resistor between 150Ω – 220Ω to achieve 50nS rise and fall times.
HMIC™ SP4T Silicon PIN Diode Switch ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 – 18 GHz Bias Network Schematic HMIC Switch Die 100 Ω 39 pF 22nH 22 pF 39 pF DC Bias 22nH 22 pF J2 J3 J4 Fig. 1 Operation of the MASW-004100-1193 Switch The simultaneous application of negative DC current to the low loss port and positive DC current to the remaining isolated ports as shown in Figure 1 will operate the MASW-004100-1193 PIN diode switch. The backside metalized area of the die is the RF and DC re turn ground plane. The DC return is achieved on common Port J1. A current source should be used to supply the DC control currents. The voltages at these points will not exceed ±1.5 vo lts and are typically 1.2 volts for supply currents up to ± 20 mA. For the port in low loss state, the series diode must be forward biased and the shunt diode reverse biased. For all the isolated ports, the shunt diode is forward biased and the series diode is reverse biased. A typi- cal bias network design which should provide >30 dB RF to DC isolation is shown in Figure 1. Best inser- tion loss, P1dB, IP3, and switching speed are achieved by using a voltage pull-up resistor in the DC return path, J1 (not shown). A minimum value of |-2V| is recommended at this return node and can be obtained using a standard, 65V, TTL controlled, PIN diode driver.
HMIC™ SP4T Silicon PIN Diode Switch ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Typical Microwave Performance MASW-004100-1193 INSERTION LOSS -2.0 -1.5 -1.0 -0.5 0.0 Frequency (GHz) Loss (dB) J1-J2 J1-J3 J1-J4 J1-J5 MASW-004100-1193 INPUT RETURN LOSS -60 -50 -40 -30 -20 -10 0 5 10 15 20 25 30 Frequency (GHz) R. Loss (dB) J1-J2 J1-J3 J1-J4 J1-J5
HMIC™ SP4T Silicon PIN Diode Switch ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Typical Microwave Performance MASW-004100-1193 OUTPUT RET URN LOSS -35 -30 -25 -20 -15 -10 0 5 10 15 20 25 30 Frequency (GHz) R. Loss(dB) MASW-004100-1193 ISOLATION -90 -80 -70 -60 -50 -40 -30 -20 -10 0 5 10 15 20 25 30 Frequency (GHz) Isolation (dB) J1-J2 J1-J3 J1-J4 J1-J5
HMIC™ SP4T Silicon PIN Diode Switch ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ASSEMBLY INSTRUCTIONS Cleanliness The chip should be handled in a clean environment free of organic contamination. Electro-Static Sensitivity The MASW-004100-1193 PIN switch is ESD, Class 1A se nsitive (HBM). The proper ESD handling procedures must be used. Wire Bonding Thermosonic wedge bonding using 0.003” x 0.00025” ribbon or 0.001” diameter gold wire is recommended. A stage temperature of 150°C and a force of 18 to 22 grams should be used. Ultrasonic energy, if necessary, should be adjusted to the minimum power required to achieve a good bond. RF wire and ribbon lengths should be kept as short as possible to minimize parasitic inductance. Mounting These chips have Ti-Pt-Au back metal and can be mounted using 80Au/20Sn eutectic solder or electrically con- ductive Ag epoxy. Mounting surface must be flat and clean of oils and contaminants. Eutectic Die Attachment An 80/20 gold-tin eutectic solder preform is recommended wi th a work surface temperature of 255°C and a tool tip temperature of 265°C. When hot gas is applied, the tool tip temperature should be 290°C. The chip should not be exposed to temperatures greater than 320°C for more than 10 seconds. No more than 3 seconds should be required for the die attachment. Silver Epoxy Die Attachment A controlled thickness of no more than 2 mils is recommended for the best electrical and thermal conductivity. A thin epoxy fillet should be visible around the perimeter of the chip after placement to ensure complete coverage. Cure epoxy per manufacturer’s recommended schedule. Typically +150°C for 1 hour.
HMIC™ SP4T Silicon PIN Diode Switch ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-004100-1193 Chip Dimensions
Ordering Information
MASW-004100-11930W Waffle Pack MASW-004100-11930G Gel Pack DIM INCHES MM NOMINAL NOMINAL A .066 1.67 B .047 1.19 C .054 1.37 D .012 0.31 E .043 1.08 F .009 0.22 G .004 0.11 H .004 0.11 I .033 0.84 J .061 1.56 Thickness .005 .120 Bond Pads .005X.005 0.120X.0120 A I J C D E B F G H All tolerances are ± .0005 inches Notes: 1. Topside and backside meta llization is gold, 2.5mm thick