MASW-000825-12770T

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

 Exceptional Broadband Performance, 0.05 - 6.0 GHz  Low Loss: Tx = 0.24 dB Avg @ 2025 MHz, 35mA  Tx = 0.38 dB Avg @ 3500 MHz, 35mA  High Isolation: Rx = 31.0 dB Avg @ 2025 MHz  Rx = 27 dB Avg @ 3500 MHz  High RF C.W. Input Power: 20 W C.W. (Tx-Ant Port)  Higher IIP3: > 64 dBm (Tx-Ant Port )  Suitable for High Power TD-SCDMA & WiMAX

Applications

 Surface Mount 3mm PQFN Package  RoHS* Compliant and 260°C Re-flow Compatible Description and Applications The MASW-000825-12770T is a compact SP2T PIN diode switch in a lead-free 3mm MLP plastic package that offers extraordinary performance with excellent isolation to loss ratio for both T X and R X states. The SP2T provides outstanding 20 W C.W. power handling coupled with 64 dBm IIP3 for maximum switch performance. The MASW-000825-12770T is a 0.05 - 6.0GHz SP2T High Peak and Average Power PIN diode switch used for T/R or LNA Protect Switch applications such as WiMAX and TD- SCDMA. This device incorporates a PIN diode die fabricated with M/A-COM Technology Solutions patented Silicon-Glass HMIC TM process. This chip feat ures two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage an d contamination during han- dling and assembly.

Ordering Information

MASW-000825-12770T 1000 piece reel MASW-000825-001SMB Sample Board MADR-008888-0002TB Sample Board with recommended external Driver & MASW-000825- 12770T Switch Pin Configuration: (Center Metal Area is RF, D.C., and Thermal Ground) PIN Function PIN Function

1 N/C 9 GND

2 GND 10 Rx

3 TX 11 GND

4 GND 12 N/C

5 N/C 13 GND

6 N/C 14 Ant

7 N/C 15 GND

8 N/C 16 N/C

Functional Diagram (TOP VIEW) PIN14 PIN10 PIN 3 Circuit Side View PIN1 PIN 16 PIN IDENTIFIER * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 MASW-000825-12770T Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications at +25°C, Characteristic Impedance Z0 = 50 Ω, 35mA/28V Parameter Symbol 35mA / 28V Conditions Units Min. Typ. Max. F = 2.0-2.7 GHz Insertion Loss, Rx Rx, IL Bias: See Table Below, Pinc= 0 dBm dB 0.42 0.55 Insertion Loss, Tx Tx, IL Bias: See Table Below, Pinc= 0 dBm dB 0.29 0.38 Isolation, Tx To Rx Rx, ISO Bias: See Table Below, Pinc= 0 dBm dB 24.5 28.6 Isolation, Rx To Tx Tx, ISO Bias: See Table Below, Pinc= 0 dBm dB 21.3 24.2 Tx Input Return Loss Tx, RL Bias: See Table Below, Pinc= 0 dBm dB - 28 Rx Input Return Loss Rx, RL Bias: See Table Below, Pinc= 0 dBm dB - 28 F = 3.3-3.8 GHz Insertion Loss, Rx Rx,IL Bias: See Table Below, Pinc= 0 dBm dB 0.56 0.71 Insertion Loss, Tx Tx, IL Bias: See Table Below, Pinc= 0 dBm dB 0.38 0.48 Isolation, Tx To Rx Rx, ISO Bias: S ee Table Below, Pinc= 0 dBm dB 22 26 Isolation, Rx To Tx Tx, ISO Bias: See Table Below, Pinc= 0 dBm dB 19.7 21.6 Tx Input Return Loss Tx, RL Bias: See Table Below, Pinc= 0 dBm dB - 28 Rx Input Return Loss Rx, RL Bias: See Table Below, Pinc= 0 dBm dB -28 F = 4.9-5.9 GHz Insertion Loss, Rx Rx, IL Bias: See Table Below, Pinc= 0 dBm dB 0.95 1.10 Insertion Loss, Tx Tx, IL Bias: See Table Below, Pinc= 0 dBm dB 0.59 0.71 Isolation, Tx To Rx Rx, ISO Bias: See Table Below, Pinc= 0 dBm dB 19.5 22.4 Isolation, Rx To Tx Tx, ISO Bias: See Table Below, Pinc= 0 dBm dB 16.5 18.5 Tx Input Return Loss Tx, RL Bias: See Table Below, Pinc= 0 dBm dB - 25 Rx Input Return Loss Rx, RL Bias: See Table Below, Pinc= 0 dBm dB - 24 Port Tx Rx ANT Pin Pin 3 Pin 10 Pin 14 Tx-ANT Isolation +28V @ 0 ma 0V + 5V @ 35 mA Tx-ANT Insertion Loss 0V +28V @ 0 ma + 5V @ 35 mA Rx-ANT Isolation 0V +28V @ 0 ma + 5V @ 35 mA Rx-ANT Insertion Loss +28V @ 0 ma 0V + 5V @ 35 mA

HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 MASW-000825-12770T Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications at +25°C, Characteristic Impedance, Z0 = 50 Ω Parameter Symbol Conditions Units Min Typ Max Tx 2nd Harmonic Tx 2Fo Fo=2.010 GHz, Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA Pin = + 30 dBm, Tx To Antenna dBc 70 Tx 3rd Harmonic Tx 3Fo Fo= 2.010 GHz, Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA Pin = + 30 dBm, Tx To Antenna dBc 86 Tx Input Third Order Inter- cept Point Tx IIP3 Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA Pi= +20 dBm, F1 = 2.010 GHz, F2 = 2.020 GHz, Tx To Antenna dBm 64 Tx C.W. Input Power2 Tx CW Pinc Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010, 3.500 GHz, Tx To Antenna dBm W 43 Tx Peak Input Power Tx Pk Pinc Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010 GHz, Tx To Antenna ( 5 μS RF Pulse Width, 1% Duty 1.10:1 Ant VSWR ) dBm W 53 200 Rx C.W. Input Power Rx CW Pinc Rx = +5.0 V@ +35mA, Tx =+28V @ 0mA F = 2.010 GHz, Antenna to Rx dBm W 39 Tx RF Switching Speed RF ( 10% - 90% RF Voltage) Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010 GHz, Tx To Antenna 1MHz Rep Rate in Modulating Mode ns 200 Tx Input P1dB Tx P1dB Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010, GHz, Tx To Antenna dBm >43 Absolute Maximum Ratings 1 @ TA = +25 °C (unless otherwise specified) Parameter Absolute Maximum Forward Current 100 mA Reverse Voltage ( RF & D.C. ) -140 V Operating Temperature -40 °C to +85 °C Storage Temperature -55 °C to +150 °C Junction Temperature +175 °C Tx Incident C.W. Power2 20 W C.W. Tx Peak Incident Power With 3.0:1 Maximum Ant VSWR 150 W, 5 uS P.W., 1% Duty 1. Exceeding these limits may cause permanent damage. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity These devices are rated Class 1B Human Body. Proper ESD control techniques should be used when handling these devices. 2. Refer to page 7 of the datasheet for power handling curves.

HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 MASW-000825-12770T Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. D.C. Bias to RF Truth Table RF State TTL & D.C. Bias Conditions Voltage at Common Anode Low Loss Tx-Ant & Isolation Tx-Rx TTL = 1 + 5V @ 35 mA ( Tx ), + 28V @ 0 mA ( Rx ) + 0.9 V Low Loss Ant-Rx & Isolation Rx-Tx TTL = 0 + 5V @ 35 mA ( Rx ), + 28V @ 0 mA ( Tx ) + 0.9 V Driver and SP2T Schematic with Positive Voltage DC BlockTX DC Block DC Block Bypass LBias Ant +5 V 180 Ω RX LBiasSP2TLBias Bypass Bypass MADR-008888-000100 DriverLogic Input Ground Notes: 1. Data is taken on M/A-COM evaluation board 1000029181-0000001 @ 25C by removing peripheral board losses ( connectors, transmission line, and bias elements ). 2. Typical PIN Diode Forward Voltage = + 0.9 V @ + 35 mA for Insertion Loss. Typical PIN Diode Reverse Voltage = 28 V – 1.0 V = 27 V for Isolation. 3. Switch is Asymmetrical, + 43 dBm RF C.W. Input Power Applies to Tx Port Only. 4. Center Ground Area of MLP 3mm Package must be Attached to Thermal Ground for Optimum RF Power Performance. 5. M/A-Com Recommends the usage of the MADR-008888-000100 driver with this switch. Assembly Note: A typical soldering process profile and handling instructions are provided in Application Notes, S2083 “Surface Mount Instructions for QFN / DFN Packages” on the M/A-Com website at www.macomtech.com

HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 MASW-000825-12770T Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Small Signal Performance at +25°C, Characteristic Impedance, Z0 = 50 Ω -40.0 -35.0 -30.0 -25.0 -20.0 -15.0 -10.0 -5.0 0.0 MASW-000825-1277OT, TX/RX Return Loss Bias:+5V @ 35mA TX RX Return Loss (dB) Frequency (GHz) -55.0 -50.0 -45.0 -40.0 -35.0 -30.0 -25.0 -20.0 -15.0 MASW-000825-1277OT, TX/RX Isolation Bias:+28V @ 0mA TX RX Isolation (dB) Frequency (GHz) -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 MASW-000825-1277OT, TX/RX Insertion Loss Bias:+5V @ 35mA TX RX Insertion Loss (dB) Frequency (GHz)

HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 MASW-000825-12770T Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Small Signal Performance over Temperature Characteristic Impedance, Z0 = 50 Ω 0.0 25.0 50.0 75.0 100.0 125.0 150.0 175.0 200.0 MASW-000825-1277OT, TX to Antenna TX Diode Tj Vs. Bias Current Bias: TX= +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz PCB Temperature is +25 ºC 20mA 35mA Tj (ºC) Pin (dBm) 40.0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 44.0 MASW-000825-1277OT, TX to Antenna Maximum Pin Vs. PCB/Heatsink Temperature Vs. Bias Current Bias: +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz 20mA 35mA Pin (dBm) PCB/Heatsink Temperature (ºC) -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 MASW-000825-1277OT, RX Insertion Loss Vs. Temperature Bias:+5V @ 35mA +25ºC -40ºC +85ºC Insertion Loss (dB) Frequency (GHz) -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 MASW-000825-1277OT, TX Insertion Loss Vs. Temperature Bias:+5V @ 35mA +25ºC -40ºC +85ºC Insertion Loss (dB) Frequency (GHz)

HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 MASW-000825-12770T Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Small Signal Performance over temperature Characteristic Impedance, Z0 = 50 Ω -55.0 -50.0 -45.0 -40.0 -35.0 -30.0 -25.0 -20.0 -15.0 MASW-000825-1277OT, RX Isolation Vs. Temperature Bias:+28V @ 0mA +25ºC -40ºC +85ºC Isolation (dB) Frequency (GHz) -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 MASW-000825-1277OT, TX Insertion Loss Vs. Temperature Bias:+5V @ 35mA +25ºC -40ºC +85ºC Insertion Loss (dB) Frequency (GHz) -40.0 -35.0 -30.0 -25.0 -20.0 MASW-000825-1277OT, RX Return Loss Vs. Temperature Bias:+5V @ 35mA +25ºC -40ºC +85ºC Return Loss (dB) Frequency (GHz) -40.0 -35.0 -30.0 -25.0 -20.0 MASW-000825-1277OT, TX Return Loss Vs. Temperature Bias:+5V @ 35mA +25ºC -40ºC +85ºC Return Loss (dB) Frequency (GHz)

HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 MASW-000825-12770T Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. TX Port PIN 3 MASW-000825-12770T Outline† – Lead Free 3mm PQFP-N 16 Lead Saw Singulated RX Port PIN 10 TX Port PIN 3 ANT Port PIN 14 ANT Port PIN 14 † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements.