MASW-000105 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Dual- / tri- / quad-band GSM / GPRS / EDGE
  • 2.5V Operation
  • Harmonics: -70 dBc @ +34.5 dBm & 1 GHz
  • Insertion Loss: 0.5 dB @ 1 GHz
  • TX - RX Isolation: 41 dB @ 2 GHz
  • Lead-Free 4 mm 20-Lead PQFN Package
  • RoHS Compliant* and 260°C Reflow Compatible

Description

M/A-COM’s MASW-000105 is a GaAs PHEMT MMIC single pole six throw (SP6T) high power switch in a 4 mm PQFN package. Designed for dual-, tri-, or quad-band GSM/GPRS/EDGE mobile devices, the MASW-000105 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. This part can be used in all systems operating up to 2.5 GHz requiring high power at low control voltage. The MASW-000105 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. The MASW-000105 can also be purchased in die form as the MASWSS0091. Pin Configuration Function Description GND Ground GND Ground VRx1 Rx1 Control GND Ground Rx1 Rx1 Port Rx2 Rx2 Port VRx2 Rx2 Control VRxC Rx Common Control VRx3 Rx3 Control Rx3 Rx3 Port Rx4 Rx4 Port GND Ground VRx4 Rx4 Control GND Ground GND Ground Tx2 Tx2 Port VTx2 Tx2 Control ANT ANT Pad VTx1 Tx1 Control Tx1 Tx1 Port Pin No.

21 Paddle3 RF and DC Ground

Ordering Information 1,2 Part Number Package MASW-000105-TR3000 3000 piece reel MASW-000105-001SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Functional Block Diagram * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 3. The exposed pad centered on the package bottom must be connected to RF and DC ground.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SP6T 2.5 V High Power Switch Dual- / Tri- / Quad-Band GSM Applications Rev. V1 MASW-000105 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, VC = 0V/2.5V, Z0 = 50 Ω 4 4. External DC blocking capacitors are required on all RF ports. Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 5 Ant - TX 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB - 0.5 0.7 0.7 Ant - RX 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB - 1.0 1.3 1.2 Isolation TX to RX, TX On 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB 40 TX to TX, TX On 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB 20 RX to TX, RX On 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB - RX to RX, RX On 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB - Return Loss 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB - TX P0.1dB VC = 0 V / 2.5 V dBm - 36 - RX P1dB VC = 0 V / 2.5 V dBm - 24 - IP3 TX to ANT ANT to RX dBm - 2nd Harmonic 0.5 - 1.0 GHz 1.0 - 2.0 GHz dBc - 3rd Harmonic 0.5 - 1.0 GHz 1.0 - 2.0 GHz dBc - Trise, Tfall 10% to 90% RF, 90% to 10% RF µs - 0.5 - Ton, Toff 50% control to 90% RF, 50% control to 10% RF µs - 0.9 - Transients In Band mV - 30 - Control Current |VC| = 2.5 V µA - 20 50
  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SP6T 2.5 V High Power Switch Dual- / Tri- / Quad-Band GSM Applications Rev. V1 MASW-000105 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Functional Schematic VTx1 VTx2 VRxC VRx1 VRx2 VRx3 VRx4 ANT- Tx1 ANT- Tx2 ANT- Rx1 ANT- Rx2 ANT- Rx3 ANT- Rx4 1 0 0 0 0 0 0 On Off Off Off Off Off 0 1 0 0 0 0 0 Off On Off Off Off Off 0 0 1 1 0 0 0 Off Off On Off Off Off 0 0 1 0 1 0 0 Off Off Off On Off Off 0 0 1 0 0 1 0 Off Off Off Off On Off 0 0 1 0 0 0 1 Off Off Off Off Off On Truth Table 8,9 8. Differential voltage, V (state 1) -V (state 0), must be 2.5 V minimum. 9. State 0 = 0 V to +0.2 V, State 1 = 2.5 V to 5 V. Parameter Absolute Maximum Input Power (0.5 - 2.5 GHz, 2.5V Control) +38 dBm Voltage +8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Absolute Maximum Ratings 6,7 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits.
  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SP6T 2.5 V High Power Switch Dual- / Tri- / Quad-Band GSM Applications Rev. V1 MASW-000105 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves TX Insertion Loss TX - RX Isolation RX Insertion Loss TX - TX Isolation RX - TX Isolation RX - RX Isolation -2.0 -1.5 -1.0 -0.5 0.0 +25°C -40°C +85°C Frequency (GHz) -2.0 -1.5 -1.0 -0.5 0.0 +25°C -40°C +85°C Frequency (GHz) -55 -50 -45 -40 -35 -30 -25 -20 -15 +25°C -40°C +85°C Frequency (GHz) -55 -50 -45 -40 -35 -30 -25 -20 -15 -40°C +85°C Frequency (GHz) -55 -50 -45 -40 -35 -30 -25 -20 -15 +25°C -40°C +85°C Frequency (GHz) -55 -50 -45 -40 -35 -30 -25 -20 -15 +25°C -40°C +85°C Frequency (GHz)
  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. GaAs SP6T 2.5 V High Power Switch Dual- / Tri- / Quad-Band GSM Applications Rev. V1 MASW-000105 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. Lead Free 4 mm 20-lead PQFN † 3rd Harmonic vs. Vctrl @ 1 GHz, Pin = +35 dBm, 100% Duty Cycle -90.0 -82.5 -75.0 -67.5 -60.0 +25°C -40°C +85°C Vctrl (V) Typical Performance Curves Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.