MASF1A JUXING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Glass passivated chip junctions Ideal for automated placement Ultrafast reverse recovery time for high efficiency Low profile package High forward surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Major Ratings and Characteristics Mechanical Date Case: JEDEC MSMA molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarit y : Laser band denotes cathode end I F(AV) 1.0 A V RRM
50 V to 600 V
I FSM 30 A t rr 35 nS V F 0.95 V, 1.25 V, 1.7 V T j max. 150 °C y Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Note 2: Pulse test:300μs pulse width,1% duty cycle. j Items Symbol MASF MASF MASF MASF MASF MASF MASF 1J UNIT Maximum repetitive peak reverse voltage V RRM 50 100 150 200 300 400 600 V Maximum RMS voltage V RMS 35 70 105 140 210 280 420 V Maximum DC blocking voltage V DC 50 100 150 200 300 400 600 V Maximum average forward rectified current I F(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 30 A 35 ℃/WThermal resistance from junction to lead (1) R θJL Operating junction and storage temperature range T T STG –55 to +150 ℃ Items Test conditions Symbol MASF1A ~ MASF1D MASF1E~ MASF1G MASF1J UNIT Instantaneous forward voltage I F =1.0A (2) V F 0.95 1.25 1.70 V Reverse current V R DC T A =25℃ T A =120℃ I R 100 μA Reverse recovery time I F = 0.5 A , I R = 1.0 A , I rr = 0.25 A t rr 35 nS Typical junction capacitance 4.0V,1.0MHz C J 15 pF http://www.trr-jx.com Surface Mount Super Fast Recovery Rectifiers
A =25 ℃ unless otherwise noted) http://www.trr-jx.com MASF1A~MASF1J Surface Mount Super Fast Recovery Rectifiers
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . I FSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general during the lifespan of the device. T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 125°C. TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this specification to improve reliability,functional characteristics,or design without notice. Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification. Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the required information is current. http://www.trr-jx.com MASF1A~MASF1J Surface Mount Super Fast Recovery Rectifiers