MAPDCC0005 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Small Size and Low Profile
  • Excellent Insertion Loss 0.6 dB Typical
  • Superior Repeatability
  • Low Cost
  • CSM, AMPS, CDPD, ARDIS, RAM Frequency Coverage
  • Lead-Free SOIC-8 Package
  • 100% Matte Tin Plating over Copper
  • Halogen-Free “Green” Mold Compound
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of DS53-0001

Description

M/A-COM’s MAPDCC0005 is an IC-based mono- lithic power divider in a low cost SOIC-8 plastic package. This 3-way power divider is ideally suited for applications where small size, low profile, and low cost without sacrificing Performance, are re- quired. Typical applications include Base Stations, portables and PCMCIA cards for cellular applica- tions. Available in Tape and Reel. The MAPDCC0005 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reli- ability.

Ordering Information

MAPDCC0005TR 1000 piece reel MAPDCC0005-TB Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Block Diagram1 Pin Configuration Pin No. Function Pin No. Function

1 GND 5 RF OUT

2 RF IN 6 GND

3 GND 7 RF OUT

4 GND 8 RF OUT

  • Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1. All unused pins must be RF and DC grounded.

Low Cost Three Way Power Splitter/Combiner 824 – 960 MHz Rev. V3 MAPDCC0005 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss above 4.78 dB dB — 0.6 0.7 Isolation dB 15 18 — Amplitude Balance dB — 0.6 0.8 Phase Balance Deg — 2 4 Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power4 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W Maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.

Low Cost Three Way Power Splitter/Combiner 824 – 960 MHz Rev. V3 MAPDCC0005 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. VSWR Input vs. Frequency Isolation vs. Frequency VSWR Output vs. Frequency Typical Performance Curves Insertion Loss vs. Frequency

Low Cost Three Way Power Splitter/Combiner 824 – 960 MHz Rev. V3 MAPDCC0005 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Lead-Free, SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations.