MAPDCC0003 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Small Size and Low Profile
  • Industry Standard SOIC-8 SMT Plastic Package
  • Excellent Amplitude and Phase Balance
  • Superior Repeatability
  • Typical Insertion Loss 0.4 dB
  • Typical Isolation 20 dB
  • 1 Watt Power Handling
  • Frequency Coverage for GPS and LEO Pro- grams
  • Lead-Free SOIC-8 Package
  • 100% Matte Tin Plating over Copper
  • Halogen-Free “Green” Mold Compound
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of DS52-0004

Description

M/A-COM’s MAPDCC0003 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other communication applications where size and PCB real estate are a premium. Available in tape and reel. The MAPDCC0003 is fabricated using a passive- integrated circuit process. The process features full-chip passivation for increased performance and reliability.

Ordering Information

MAPDCC0003-TR 1000 Piece Reel MAPDCC0003-TB Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Diagram * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Pin Configuration Pin No. Function

1 GND

2 RF-IN

3 GND

4 GND

5 RF-1 (out)

6 GND

7 GND

8 RF-2 (out)

Low Cost Two-Way SMT Power Divider 1510-1660 MHz Rev. V4 MAPDCC0003 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications1: TA = +25°C Parameter Units Min Typ Max Insertion Loss Above 3.0dB dB — 0.4 0.6 Isolation dB 15 20 — VSWR Input RL — — 1.3:1 1.5:1 VSWR Output RL — — 1.4:1 1.6:1 Amplitude Balance dB — 0.1 0.2 Phase Balance Deg — 1.0 3.0 Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power4 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With Internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1. All specifications apply with a 50-Ohm source and load impedance.

Low Cost Two-Way SMT Power Divider 1510-1660 MHz Rev. V4 MAPDCC0003 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Isolation vs. Frequency VSWR vs. Frequency Phase Balance vs. Frequency Typical Performance @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency 1.00 1.25 1.50 1.75 2.00 1400 1450 1500 1550 1600 1650 1700 Frequency (MHz) VSWR RFIN RF1 RF2 Insertion Loss vs. Frequency 0.00 0.25 0.50 0.75 1.00 1400 1450 1500 1550 1600 1650 1700 Frequency (MHz) Insertion Loss (dB) RF1 RF2 Isolation vs. Frequency 1400 1450 1500 1550 1600 1650 1700 Frequency (MHz) Isolation (dB) RF1-RF2 Phase Balance vs. Frequency 0.00 0.05 0.10 0.15 0.20 1400 1450 1500 1550 1600 1650 1700 Frequency (MHz) Phase Balance Phase In-Balance

Low Cost Two-Way SMT Power Divider 1510-1660 MHz Rev. V4 MAPDCC0003 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Lead-Free, SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations.