MAPDCC0001 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Small Size and Low Profile
  • Excellent Amplitude and Phase Balance
  • Superior Repeatability
  • Typical Insertion Loss 0.5 dB
  • Typical Isolation 23 dB
  • 1 Watt Power Handling
  • Lead-Free SOIC-8 Package
  • 100% Matte Tin Plating over Copper
  • Halogen-Free “Green” Mold Compound
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of DS52-0001

Description

M/A-COM’s MAPDCC0001 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other communication applications where size and PCB real estate are a premium. Available in tape and reel. The MAPDCC0001 is fabricated using a passive- integrated circuit process. The process features full-chip passivation for increased performance and reliability.

Ordering Information

MAPDCC0001TR 1000 piece reel MAPDCC0001-TB Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Block Diagram * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Pin Configuration Pin No. Function

1 GND

2 RF-IN

3 GND

4 GND

5 RF-1 (out)

6 GND

7 GND

8 RF-2 (out)

Low Cost Two-Way SMT Power Divider 824-960 MHz Rev. V4 MAPDCC0001 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications1: TA = +25°C Parameter Units Min Typ Max Insertion Loss Above 3.0dB dB — 0.5 0.6 Isolation dB 15 23 — VSWR Input Output 1.35:1 1.25:1 1.5:1 1.4:1 Amplitude Balance dB — 0.05 0.15 Phase Balance Deg. — 0.5 1.5 Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power4 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With Internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1. All specifications apply with a 50-Ohm source and load impedance.

Low Cost Two-Way SMT Power Divider 824-960 MHz Rev. V4 MAPDCC0001 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Isolation vs. Frequency VSWR vs. Frequency Phase Balance vs. Frequency Relative to RF1 Typical Performance @ +25ºC Insertion Loss vs. Frequency 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 824 858 892 926 960 F requency (MHz) Insertion Loss (dB) 0 824 858 892 926 960 Fre qu e n cy (MHz ) Isolation (dB) 0.00 0.05 0.1 0 0.1 5 0.20 824 858 892 926 960 F requency (MHz) Phase Balance (Deg) 1. 0 1. 1 1. 2 1. 3 1. 4 1. 5 824 858 892 926 960 Fre qu e n cy (MHz ) VSWR Output Input

Low Cost Two-Way SMT Power Divider 824-960 MHz Rev. V4 MAPDCC0001 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Lead-Free, SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations.