MAPD-007249-ESML21 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Surface mount
  • Wide frequency range
  • 2-Way—0°
  • Lead Free
  • RoHS* Compliant and is 2600C reflow compatible.
  • Available on Tape and Reel.

Description

M/A-COM’s MAPD-007249-ESML21 is a RoHS com- pliant 2 Way 0° Power Divider in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel.

Ordering Information

MAPD-007249-ESML21 500 piece reel Note: Reference Application Note M513 for reel size information. Pin Configuration Pin No. Function

1 Ground

2 Not Connected

3 Port 2

4 Port 1

5 Not Connected

6 Input

This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. SM-24 package Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Maximum Power Rating 1 Watt Internal Load Dissipation 0.125 Watt Pin Temperature (10 Sec) 250°C Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits.

E-Series 2-Way 0° Power Divider 5 – 500 MHz MAPD-007249-ESML21 V1P RoHS Compliant Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 5 - 500 MHz — — — Insertion Loss FL—f U 5 - 500 50 –250 250 - 500 dB dB dB 0.25 0.3 0.5 0.5 0.5 1.0 Isolation FL—f U 5 - 500 50 –250 250 - 500 dB dB dB Amplitude Unbalance FL—f U 5 - 500 50 –250 250 - 500 dB dB dB 0.15 0.3 0.6 Phase Unbalance FL—f U 5 - 500 50 –250 250 - 500 Degrees Degrees Degrees