MAP9000 MGCHIP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

 Triac dimming (110Vac/120Vac only)  Flicker-free  EMI improvement  Power variation: ±15%  Constant output power control  Higher power factor : > 0.95  Lower total harmonic distortion : < 20%  Higher current drive capability Up to 240mA  6X6mm QFN 12Leads

Applications

 AC LED Driver  Lighting equipment  LED Driver Power Supplies MAP9000 High Voltage AC LED Driver

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver Simplified Application Circuit - AC Direct MAP9000 4 5 6 101112 - Triac Dimming (110Vac/120Vac only) MAP9000 4 5 6 101112100nF 1KΩ - Flicker-free MAP9000 4 5 6 101112 3.3uF

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver Pin Configuration & Description - Pin Configuration 11 1012 5 64 MAP9000 Rhold VIN HOLD EMI CS MODE OUT1 OUT2 OUT3 VCC GND N.C - Pin Description Pin Descriptions

1 VCC VCC

2 GND Ground

3 N.C No Connection

4 EMI EMI improvement

5 CS Current sensing

6 MODE Flicker-free mode

7 OUT3 Output – 3

8 OUT2 Output – 2

9 OUT1 Output – 1

10 HOLD Holding-up current

11 VIN VCC charging

12 Rhold HOLD turn-on voltage

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver Functional Block Diagram AC Bandgap Ref. 79 810 Analog Logic & Current Control Bridge Diode 1uF 42 3 Line Shape HOLD OUT1 OUT2 OUT3 VCC Rhold GND N.C EMI CS VIN MODE

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver Absolute Maximum Ratings PARAMETER VALUE UNIT VIN 700 V HOLD, OUT1, OUT2, OUT3 -0.3 ~ 700 V EMI -0.3 ~ 6 V VCC, Rhold, MODE 20 V Operating Temperature Range -40 ~ 125 ℃ Junction Temperature Range -40 ~ 150 ℃ Storage Temperature Range -65 ~ 150 ℃ Lead Temperature(soldering, 10sec ) 260 ℃ ESD Susceptibility HBM All Pins (Note 1) ±2000 V MM All Pins (Note 2) ±200 V CDM All Pins (Note 3) ±1000 V Note 1: ESD tested per JESD22A-114. Note 2: ESD tested per JESD22A-115. Note 3: ESD tested per JESD22C-101E Thermal Resistance PARAMETER VALUE UNIT Thermal Resistance (θJA) , (Note4) 6X6mm QFN 12Leads 63 ℃/W Thermal Resistance (θJT) , (Note5) 8.7 ℃/W Note 4: Multi-layer PCB based on JEDEC standard (JESD51-7) Note 5: The Metal PCB’ diameter is 70mm and height is 1.6t.

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver

Electrical Characteristics

Ta = 25℃, CS Resistance = 6.8Ω unless otherwise specified SYMBOL PARAMETER TEST CONDITION MIN TYP MAX UNIT Supply VVIN Input voltage range Note 6 50 700 V VVCC Operating voltage - 15 - V IVCC Input current 300 600 900 uA VUVLO Under voltage lockout UVLO_H - 12 - V UVLO_L - 10 - V Driver Section Rhold Rhold reference voltage VVIN = 200V, VGND = 0V 5.2 V ID Leak Driver Leakage current VVIN = 200V, VGND = 0V, HOLD & OUT1 ~ 3 = 400V - - 10 uA IHOLD HOLD current VVIN =200V, HOLD = 40V MODE = 0V, Rhold = 0V 78.3 86.3 94.2 mA IOUT1 Driver 1 current VVIN =200V, OUT1 = 40V Rhold = 0V 119.3 128.0 136.7 mA IOUT2 Driver 2 current VVIN =200V, OUT2 = 40V Rhold = 0V 146.0 155.2 164.3 mA IOUT3 Driver 3 current VVIN =200V, OUT3 = 40V Rhold = 0V 178.7 186.2 193.6 mA IOUT_SUM - IHOLD + IOUT1 + IOUT2 + IOUT3 531.0 556.0 581.0 mA Note 6: Stress beyond the maximum ratings listed above may incur permanent damage to the device. Operating above the recommended conditions for extended time may stress the device and affect device reliability. Also the device may not operate normally above the recommended operating conditions. These are stress ratings only.

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver Typical Operating Characteristics 0 50 100 150 200 0.0 0.1 0.2 0.3 0.4 0.5 0.6 Iop (mA) VIN (V) Iop 0 20 40 60 80 100 120 140 160 180 200 100 120 140 160 180 LED Drive Current (mA) VIN (V) IHOLD IOUT1 IOUT2 IOUT3 Operate Current Vs. Input Voltage LED Drive current Vs. Input Voltage -40 -20 0 20 40 60 80 100 120 140 100 110 120 130 140 150 160 170 180 190 200 IHOLD IOUT1 IOUT2 IOUT3 LED Drive Current (mA) Temperature (C o -20 0 20 40 60 80 100 120 140 100 200 300 400 500 600 700 800 Iop (uA) Temperature (C o Iop LED Drive current Vs. temperature Operate Current Vs. temperature

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver Recommended Surge Protection Circuit 1. Circuit Diagram The surge test using our demo-board and pass 0.5KV surge voltage at input wattage 16W MAP9000 1uF 4 5 6 101112 Varistor 330VDC/250VAC 10KΩ 2012 2. Demo-board layout

Datasheet Version 2.0 AUG 2015 Page 10 MAP9000 – High Voltage AC LED Driver Physical Dimensions 1) QFN 6x6 12LD MagnaChip Semiconductor Ltd. doesn’t not recommend the use of its products in hostile environments, including, without limitation, aircraft, nuclear power generation, medical appliances, and devices or systems in which malfunction of any product can reasonably be expected to result in a personal injury. Seller’s customers using or selling Seller’s products for use in such application s do so at their own risk and agree to fully defend and indemnify Seller. MagnaChip reserves the right to change the specifications and circuitry without notice at any time. MagnaChip does not consider responsibility for use of any circuitry other than circuitry entirely included in a MagnaChip product. is a registered trademark of MagnaChip Semiconductor Ltd. MagnaChip Semiconductor Ltd. 891, Daechi-Dong, Kangnam-Gu, Seoul, 135-738 Korea Tel : 82-2-6903-3451 / Fax : 82-2-6903-3668 ~9 www.magnachip.com