MAP200ARDEA MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Catalog 1654857 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 6-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 © 2004 by Tyco Electronics Corporation. All Rights Reserved. KILOVAC, AMP, LOUVERTAC and TYCO are trademarks. Other products and company names mentioned herein may be trademarks of their respective owners. MAP200 Series Contactor With 1 Form A (SPST-NO) Contacts Rated up to 500 Amps, 12-900VDC Product Facts I Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating. I Built-in coil economizer (models requiring external economizer also available). I Optional auxiliary contact for easy monitoring of power contact position. I Hermetically sealed – intrinsically safe, operates in explosive/harsh environments with no oxidation or contamination of coils or contacts, including long periods of non-operation. I Versatile coil and power connections. I MIL-PRF-32085 versions in development Performance Data Parameter Units Value for MAP200 Series Contact Arrangement, power contacts 1 Form A (SPST-NO) Rated Operating Voltage VDC 12 - 900 Continuous (Carry) Current, Typical A 500 @ 85°C, 400 mcm conductors Consult Factory for required conductors for higher currents Make/Break Current at Various Voltages 1/ A See next page Break Current at 320VDC 1/ A 2,000, 1 cycle Contact Resistance, Typ. (@200A) mohms 0.2 Load Life Cycles See next page Mechanical Life Cycles 1 million Contact Arrangement, auxiliary contacts 1 Form A (SPST-NO) Aux. Contact Current, Max. A 2A @ 30VDC / 3A @ 125VAC Aux. Contact Current, Min. mA 100mA @ 8V Aux. Contact Resistance, Max. ohms 0.417@ 30VDC / .150 @ 125VAC Dielectric Withstanding Voltage Vrms 2,200 @ sea level Insulation Resistance @ 500VDC megohms 100 2/ Shock, 11ms 1/2 sine, peak, operating G 20 Vibration, sine, 80-2000Hz., peak G 20 Operating Temperature °C -55 to +85 Weight, Nominal lb.(kg) .95 (.43) 1/ Main power contacts 2/ 50 at end of life 3/ Use with AMP LOUVERTAC 5-192013-9. Consult factory for threaded mount socket. Part Numbering System Typical Part Number MAP200 A R D E A Series: MAP200 = 500 Amp, 12-900VDC Contactor Contact Form: A = Normally Open H = Normally Open with Aux. Contacts Coil Voltage: R = 18-32VDC Coil Wire Length: A = 15.3 in (390 mm) B = 6.0 in (152 mm) D = Coil connector on relay (requires option “E” or “X” in next step). Coil Terminal Connector: N = No connector E = 9-pin subminiature “D” plug mounted on contactor housing F = 9-pin subminiature “D” plug mounted on 15.3 in (390 mm) flying leads. X = Special configuration (consult factory) Mounting & Power Terminals: A = Bottom Mount & Male M8 x 1.25 Thread Terminals B = Bottom Mount & Female 1/4-20 Thread Terminals C = Bottom Mount & Plug-in Terminals D = Bottom Mount & Female M6 x 1 Thread Terminals Coil Operating Voltage (valid over temperature range) Voltage (will operate) 18-32VDC Voltage (Max.) 32VDC Pickup (close) Voltage Max. 18VDC Hold Voltage (Min.) 10VDC Dropout (open) Voltage (Min.) 2VDC Inrush Current (Max.) 4.5A Holding Current (Avg.) 0.5A Inrush Time (Max.) 100ms For factory-direct application assistance, dial 800-253-4560, ext. 2053, or 805-220-2053.

Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 MAP200 Series (Continued)

500 Amp, 12-900VDC Contactor with

1 Form A (SPST-NO) Contacts

1.65 ± .01 (42.0 ± .26) 2.688 ± .01 (68.28 ± .26) 1.05 ± .01 (26.67 ± .26)LABEL

2 X 10-32 THREAD THRU

TORQUE: 15 TO 30 IN-LB (1.7 TO 3.3 NM)

2 X M6 x 1 THREAD

.45 (11.43) MIN DEPTH (11 THREADS) TORQUE VS THREAD ENGAGEMENT 8 TO 11 THREADS: 80 TO 100 IN-LB (9.1 TO 11.3 NM) 7 TO 8 THREADS: 70 TO 80 IN-LB (7.9 TO 9.1 NM) 5 TO 7 THREADS: 60 TO 70 IN-LB (6.8 TO 7.9) .800 ± .01 (20.3 ± .26) 3.289 ± .025 (83.54 ± .635) 3.17 ± .01 (80.48 ± .26) 2.20 ± .025 (55.81 ± .63) 2.523 ± .025 (64.08 ± .635) 2.245 ± .025 (57.02 ± .635) 1.431 ± .025 (36.35 ± .635) .546 ± .01 (13.87 ± .26) WIRE VIEW REMOVED FOR CLARITY Estimated Make & Break Power Switching Ratings Electrical Load Life Ratings for Typical Applications NOTES: 1) FOR RESISTIVE LOADS WITH 300µH MAXIMUM INDUCTANCE. 2) ESTIMATES BASED ON EXTRAPOLATED DATA. USER IS ENCOURAGED TO VERIFY RATING IN ACTUAL APPLICATION. 3) END OF LIFE WHEN DIELECTRIC STRENGTH BETWEEN TERMINALS FALLS BELOW 50MEGOHMS @ 500VDC. 4) THE MAXIMUM CONTACT MAKE AND BREAK POWER IS ESTIMATED AT 208KW. BREAK ONLY ABOVE 208KW TO AVOILD CONTACT WELDING. 100,000 10,000 1,000 100 1,000 10,000100101 Continuous Current Carry Region Non-continuous Current Carry Region200A Estimated Life (Cycles) Load Current (Amps)

1800 VDC

900 VDC

600 VDC

400 VDC

270 VDC

120 VDC

28 VDC

80% Minimum Pre Charge 90% Nominal Pre Charge mS Amps MAP200 CAPACITIVE MAKE TEST CURVES700 650 600 550 500 450 400 350 300 250 200 150 100 Make/Break Life Capacitive & Resistive Loads at 320VDC (1) (2) @90% capacitive pre-charge (make only) see chart below Cycles 50,000 @80% capacitive pre-charge (make only) see chart below Cycles 50 @200A make/break (2 consecutive, reverse polarity) (1) Cycles 12 2,000A (break only) (1) Cycles 1* (1) Resistive load includes inductance L = 25µH. Load @ 2500A tested @ 200µH. (2) Life based on projected Weibull Life with 95% teliability. * Does not meet dielectric and IR after test. For factory-direct application assistance, dial 800-253-4560, ext. 2053, or 805-220-2053. 1654857 – 2.5M – KRG – FP – 6-04 Printed in U.S.A.