DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

7–1 0 KILO VAC H igh Voltage D C Contactors For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Catalog 5-1 773450-5 D im ensions are show n for D im ensions are in m illim eters U SA: +1 800 522 6752 For additional support num bers R evised 3-1 3 reference purposes only. unless otherw ise specified. Asia Pacific: +86 0 400 820 601 5 please visit w w w .te.com Specifications subject U K: +44 800 267 666 w w w .te.com to change. KILOVAC M AP 200 Series Contactor w ith 1 Form A (SP ST-NO) Contacts Rated up to 500 Am ps, 12-900 Vdc P erform ance D ata Contact Arrangem ent, P ow er Contacts — 1 Form A (SPST-NO) Rated Operating Voltage — 12 - 9 00 VD C Continuous (Carry) Current, Typical — 500 A @ 85°C , 400 m cm conductors C onsult Factory for required conductors for higher currents M ake/B reak Current at Various Voltages 1 — See graph next page B reak Current at 320VD C 1 — 2,000 A, 1 cycle Contact Resistance, Typ. (@ 200A) — 0.2 m ohm s Load Life — See graph next page M echanical Life — 1 m illion cycles Contact Arrangem ent, Auxiliary Contacts — 1 Form A (SPST-NO) Aux. Contact Current, M ax. — 2A @ 30VD C / 3A @ 125VAC Aux. Contact Current, M in. — 100m A @ 8V Aux. Contact Resistance, M ax. — 0.417 ohm s @ 30VD C / .150 ohm s @ 125VAC D ielectric W ithstanding Voltage — 2,200 Vrm s @ sea level Insulation Resistance @ 500VD C — 100 m egohm s 2 Shock, 11m s 1/2 Sine, P eak, Operating — 20 G Vibration, Sine, 50-2000H z., P eak — 20 G Operating Tem perature — -55°C to +85°C W eight, Nom inal — .9 5 lb. (.43 kg) N otes:

1 M ain pow er contacts

C oil O perating Voltage (Valid O ver Tem perature R ange) V oltage (Will Operate) 18-32V D C V oltage (M ax.) 32V D C P ickup (C lose) V oltage M ax. 18V D C H old V oltage (M in.) 10V D C D ropout (Open) V oltage (M in.) 2V D C Inrush C urrent (M ax.) 4.5A H olding C urrent (A vg.) 0.5A Inrush Tim e (M ax.) 100m s P roduct Facts n D esigned to be the sm allest, lightest w eight, low est cost sealed contactor in the industry w ith its current rating for m ilitary aerospace, ground vehicle and naval, high current

applications

n B uilt-in coil econom izer (m odels requiring external econom izer also available) n Optional auxiliary contact for easy m onitoring of pow er contact position n H erm etically sealed — intrinsically safe, operates in explosive/harsh environm ents w ith no oxidation or contam ination of coil or contacts, including long periods of non- operation n Versatile coil and pow er connections n RoH S versions available Ordering Inform ation Typical Part N um ber /H17075M A P200 ARDEA Series: M AP20 0 = 50 0 Am p, 12-9 0 0 VD C C ontactor C ontact Form : A = Norm ally O pen H = Norm ally O pen w ith Aux. C ontacts C oil Voltage: R = 28 Vdc, M echanical Econom izer S = 28 Vdc, Electrical C ut-throat Econom izer C oil W ire Length: A = 15.3 in (39 0 m m ) D = C oil connector on relay (requires option “E” or “X” in next step). C oil Term inal C onnector: N = No connector E = 9 -pin subm iniature “D ” plug m ounted on contactor housing X = Special configuration (consult factory) M ounting & Pow er Term inals: A = B ottom M ount & M ale M 8 x 1.25 Thread Term inals B = B ottom M ount & Fem ale 1/4-20 Thread Term inals D = B ottom M ount & Fem ale M 6 x 1 Thread Term inals

7–1 1 KILOVAC M AP 200 Series (Continued) KILO VAC H igh Voltage D C Contactors KILOVAC High Voltage DC Contactors For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Catalog 5-1 773450-5 D im ensions are show n for D im ensions are in m illim eters U SA: +1 800 522 6752 For additional support num bers R evised 3-1 3 reference purposes only. unless otherw ise specified. Asia Pacific: +86 0 400 820 601 5 please visit w w w .te.com Specifications subject U K: +44 800 267 666 w w w .te.com to change. Outline D im ensions 1.65 ± .01□ (42.0 ± .26) 2.688 ± .01□ (68.28 ± .26) 1.05 ± .01□ (26.67 ± .26)LABEL

2 X 10-32 THREAD THRU□

TORQUE: 15 TO 30 IN-LB (1.7 TO 3.3 NM)

2 X M6 x 1 THREAD□

.45 (11.43) MIN DEPTH (11 THREADS)□ TORQUE VS THREAD ENGAGEMENT□ 8 TO 11 THREADS: 80 TO 100 IN-LB (9.1 TO 11.3 NM)□ 7 TO 8 THREADS: 70 TO 80 IN-LB (7.9 TO 9.1 NM)□ 5 TO 7 THREADS: 60 TO 70 IN-LB (6.8 TO 7.9) .800 ± .01□ (20.3 ± .26) 3.289 ± .025□ (83.54 ± .635) 3.17 ± .01□ (80.48 ± .26) 2.20 ± .025□ (55.81 ± .63) 2.523 ± .025□ (64.08 ± .635) 2.245 ± .025□ (57.02 ± .635) 1.431 ± .025□ (36.35 ± .635) .546 ± .01□ (13.87 ± .26) WIRE VIEW REMOVED□ FOR CLARITY Estim ated M ake & B reak P ow er Sw itching Ratings NOTES: 1) For resistive loads with 300µH maximum inductance. Consult factory for inductive loads. 2) Estimates based on extrapolated data. User is encouraged to confirm performance in application. 3) End of life when dielectric strength between terminals falls below 50 megohms @ 500VDC. 4) The maximum make current is 650A to avoid contact welding. 100,000 10,000 1,000 100 1,000 10,00010010 1 Make and Break Power Switching Region Break Only Above 650A 650A Estimated Life (Cycles) Load Current (A)

1800 VDC

900 VDC

600 VDC

400 VDC

270 VDC

120 VDC

28 VDC

C oil+ = P in 2 C oil - = P in 6 A ux. C OM = P in 8 A ux. N O = P in 4 M A P200A R C oil+ = P in 2 C oil - = P in 6