MAN6900 QT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

TrOTerCTANHICS SEVEN SEGMENT DISPLAYS SS HIGH EFFICIENCY RED MAN6900 SERIES renee te Sea ee ® High Efficiency Red nitrogen-doped GaAsP on GaP ig ce F z= = Large, easy to read, digits ~~ & nag = Common anode or common cathode models ca boss = Fast switching — excellent for multiplexing ~~ Bs a § Low power consumption , = Bold solid segments that are highly legible = Solid state reliability — long operation life = Rugged plastic construction ® Directly compatible with integrated circuits ™ High brightness with high contrast ™ Categorized for Luminous Intensity (See Note 6) DESCRIPTION ‘= Wide angle viewing. ..150° = Low forward voltage ‘The MAN6900 Series is a family of large digits which = Two-digit package simplifies alignment and assembly includes double and single digits. The series features the sculptured font which minimizes “gappiness” at the segment intersections. Available models include two- digit, one and one-hatf digits with polarity sign, and single ; digits. All models have right hand decimal points and are Forindustial and consumer applications such as; available in common anode or common cathode a cn al vent out i jays configuration. This device has a Red face and Red parument panels = Point of sale equipment segments.

1 Digital clocks

= TVand radios NUMBER coLoR DESCRIPTION DRAWING SPECIFICATION MAN6910 High Eff. Red 2 Digit; Common Anode; Rt. Hand Decimal A A MAN6930 High Eff.Red 1% Digit; Common Anode; Overflow +1.8; Rt. Hand Decimal B 8 MAN6940 High Eff.Red 2 Digit; Common Cathode; Rt. Hand Decimal A c MAN6950_ High Eff.Red 11 Digit; Common Cathode; Overflow +1.8; Rt. Hand Decimal B D MAN6960 High Eff. Red Single Digit; Common Anode; Rt. Hand Decimal c E MAN6980_High Eff, Red _Single Digit; Common Cathode; Rt. Hand Decimal c F RECOMMENDED OPTICAL FILTERS For optimum ON and OFF contrast, one of the following filters or equivalents should be used over the display: DEVICE TYPE FILTER Panelgraphic Scarlet 65 MAN6900 Series Homalite 100-1670

QT 0.560-INCH DPTOTLECTRONICS SEVEN SEGMENT DISPLAYS I ELECTRO-OPTICAL CHARACTERISTICS (Per Diode at 25°C Free Air Temperature Unless Otherwise Specified) MIN. Te. MAX. UNITS TEST CONDITIONS Luminous intensity, digit average 510 2200 wed =10mA (See Note 1) Peak emission wavelength 635 am Spectral line half width 40 am Forward voltage ‘Segment 25 v |=20 mA Decimal point 25 v l=20 mA Dynamic resistance ‘Segment 26 2 1=20 mA Decimal point 26 2 _b=20mA Capacitance ‘Segment 35 pF V=0 Decimal point 35 pF V=0 Reverse current Segment 100 HA Vn=5.0V Decimal point 100 HA __Vn=5.0V ABSOLUTE MAXIMUM RATINGS MAN6340 MAN6950 MAN6980 Continuous forward current Total... eeeeceeeee vee eeeee en teeee 480 mA 420 mA 240 mA Decimal point .... cette 30 mA 30 mA 30 mA Reverse voltage Soldering time at 260°C (See Notes 3 and 4) 5 sec. 5 sec. 5 sec, TYPICAL THERMAL CHARACTERISTICS 1. The digit average Luminous intensity is obtained by summing the Luminous Intensity of each segment and dividing by the total number of segments. Intensity will not vary more than +33.3% between all segments within a digit. 2. The curve in Figure 3 is normalized to the brightness at 25°C to indicate the relative efficiency over the operating temperature range. 3. Leads of the device immersed to 1/16 inch from the body. Maximum device surface temperature is 140°C. 4. For flux removal, Freon TF, Freon TE, Isoproponal or water may be used up to their boiling points. 5. All displays are categorized for Luminous Intensity. The Intensity category is marked on each part as a suffix letter to the part number.

‘QT 0.560-INCH OPTOELECTRONICS SEVEN SEGMENT DISPLAYS eel PACKAGE DIMENSIONS ray ala i, me | ae te a” lo Loft Ueto U2do6 1 Looe tins1—fioo oo oo oo orn oo ain pines -_ ee aren | sorrom view L peel Flt. ‘Ledbe aM —

SPTOELECTRONICS SEVEN SEGMENT DISPLAYS EEE ELECTRICAL CONNECTIONS ra

1 Cathode E 1 Cathode C 1 Anode E 1 Anode C1 Cathode E Anode E

2 Cathode D1 Cathode D1 Anode D1 Anode D1 Cathode D Anode D

3 Cathode C1 Cathode B 1 Anode C1 Anode B1 Com. Anode Com. Cathode 5 Cathode E 2 Cathode E 2 Anode E 2 Anode E 2 Cathode D.P. Anode D.P.

6 Cathode D 2 Cathode D 2 Anode D2 Anode D 2 Cathode B Anode B

7 Cathode G2 Cathode G 2 Anode G2 Anode G2 Cathode A Anode A

8 Cathode C 2 Cathode C 2 Anode C2 Anode C 2 Com. Anode Com. Cathode

10 Cathode B 2 Cathode B 2 Anode B2 Anode B 2 Cathode G Anode G

Ww Cathode A2 Cathode A2 Anode A2 Anode A2

12 Cathode F 2 Cathode F 2 Anode F 2 Anode F 2

13, Anode Digit 2 Anode Digit 2 Cathode Digit 2 Cathode Digit 2

14 Anode Digit 1 Anode Digit 1 Cathode Digit 1 Cathode Digit 1

15 Cathode B 1 Cathode A1 Anode B 1 Anode A1

16 Cathode A1 No Connection Anode A1 No Connection

17 Cathode G1 No Connection Anode G1 No Connection

18 Cathode F 1 No Connection Anode F 1 No Connection

a a Se NN TT) eo SO a 2 PSCC Ee a SS 2 cn ‘c ‘0 soCL aT a DS Sd Sa se Ee A A wt ETT ET #1 | TT} ey, 1 NI * See eanenee a a a oe oe Forward Voltage Forward Current Temperature (See Note 2) 1000 49 a a ’ ~ > if oo TT A FT NORMALIZED Ay ie 10.mA FREQUENCY = 200 pps [XPT TT 2, | Nain CX TTT 2 | | SoU] op Ne eros |_| é N E> RLCT 32 } 1 a a pe g is F—-+4 NI eC TTN TY 3 {| i” XK) oF Se Neri gL LEN EHR x ‘q Z a ttt} [| eee ores atil 188 1 e080 100 see 0C FORWARO CURRENT — ir ma PUTVEYOLE=% orig rem eink ANGE Crea cree Duty Cycle Duty Cycle Forward Current

QT | 0.560-INCH OPTOELECTRONICS SEVEN SEGMENT DISPLAYS Mma evecare SHH dinaen| ainae aa