MAMXSS0010 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Low Conversion Loss
  • Input Power @ 1 dB Compression: +21 dBm
  • Typical Two-Tone IM Ratio: > 50 dBc
  • LO Drive Level: +11 to +23 dBm
  • DC - 200 MHz IF Bandwidth
  • Lead-Free SOIC-8 Package
  • 100% Matte Tin Plating over Copper
  • Halogen-Free “Green” Mold Compound
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of MD54-0003

Description

M/A-COM’s MAMXSS0010 is a passive mixer that achieves the performance of a double balanced diode mixer in a lead-free surface mount plastic SOIC-8 package. The MAMXSS0010 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/down conversion, modulation, demodulation in systems such as base station receivers and transmitters for DCS1800, PCS and PHS applications. The MAMXSS0010 uses FETs as mixing elements to achieve very wide dynamic range in a low cost plastic package. The mixer operates with LO drive levels of +11 dBm to +23 dBm. No DC bias is required. M/A-COM’s MAMXSS0010 is fabricated using a mature 1-micron GaAs process. The process features full IC passivation for increased performance and reliability. Part Number Package MAMXSS0010 Bulk Packaging MAMXSS0010TR 1000 piece reel MAMXSS0010SMB Designer’s Kit

Ordering Information

  1. Reference Application Note M513 for reel size information. Functional Diagram External matching network on LO Port: R = 330 ohms, L = 3 nH, C = 3.3 pF 8 7 6 5 1 2 3 4 R C L Pin Configuration Pin No. Function Pin No. Function

1 Ground 5 Ground

2 RF Port 6 LO Port

3 Ground 7 IF Port

4 Ground 8 Ground

  • Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V2 MAMXSS0010 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: Test Conditions: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (13 dBm), IF = 140 MHz, TA = +25°C Parameter Test Conditions Units Min Typ Max Conversion Loss — dB — 8.5 9.5 Isolation LO to RF LO to IF RF to IF dB dB dB VSWR LO Port RF Port IF Port Ratio Ratio Ratio 2.5:1 2.0:1 2.0:1 Input 1 dB Compression RF Freq. = 1800 MHz, LO = +13 dBm dBm — +21 — Two-Tone IM Ratio2 Two tones at –10 dBm each, Tone spacing 100 kHz, IF = 140 MHz dBc 50 65 — 2. IMR vs RF drive level can be calculated by the formula: IMR = 50 - (1.5 x P IN ) 4x 17 6.9 48.2 47.2 62.3 61.1 71.7 61.7 73.4 63.4 3x 10.3 0.3 28.9 28.9 63.0 61.3 71.3 63.5 70.6 61.6 2x -8.8 -18.8 -25.7 25.9 52.1 61.3 71.5 61.5 72.1 62.1 1x -13.1 -23.1 67.5 61.1 71.3 61.9 72.6 62.6 0x X X 2.1 2.1 56.8 61.7 72.3 62.3 69.3 59.8 0x 1x 2x 3x 4x Harmonic of RF Spurious Table Harmonic of LO The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated by the number of dB below the conversion loss. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of -5 dBm, the lower number is for -15 dBm. |mF RF - nFLO |, RF = -5 dBm |mFRF - nFLO |, RF = -15 dBm RF Frequency = 1850 MHz LO Frequency = 1710 MHz Parameter Absolute Maximum RF Input Power5 +22 dBm LO Drive Power5 +23 dBm Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Absolute Maximum Ratings 3,4 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. Total combined power for RF and LO ports should not exceed +23 dBm. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V2 MAMXSS0010 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves Conversion Loss Input P1dB Isolation RF, LO and IF VSWR Lead-Free SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 15.0 17.5 20.0 22.5 25.0 1700 1750 1800 1850 1900 1950 2000 RF Frequency (MHz) 1700 1750 1800 1850 1900 1950 2000 RF Frequency (MHz) 1700 1750 1800 1850 1900 1950 2000 RF TO IF LO TO IF LO TO RF RF Frequency (MHz) 1700 1750 1800 1850 1900 1950 2000 0 50 100 150 200 250 300 LO RF IF RF Frequency (MHz) IF Frequency (MHz)