MAMX-007674-LCM1MH MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • LO Power +13 dBm
  • Up to +9 dBm RF
  • Surface Mount
  • Tape and reel packaging available
  • 260°C Reflow Compatible
  • RoHS* compliant version of the ELCM-1MH

Description

M/A-COM’s MAMX-007674-LCM1MH is a RoHS Com- pliant Low Cost, Broadband, high performance Double Balanced Mixer designed for use in high volume wireless applications. The device has been optimised by careful selection of the Schottky Diode and Balun Transformer for excellent performance. MAMX- 007674-LCM1MH is available in an SM-89 surface mount package and is designed to be utilized in both standard reflow and high temperature soldering reflow profiles. Parts are packaged in tape & reel.

Ordering Information

MAMX-007674-LCM1MH Tape and Reel (900 piece Reel) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. Pin Configuration Pin No. Function 1 LO

2 Ground

3 Ground

6 Ground

Absolute Maximum Ratings 1 Parameter Absolute Maximum RF Power 50 mW Peak IF Current 40 mA Operating Temperature -55°C to +85°C Storage Temperature -55°C to +125°C Pin Temperature (10 seconds) +260°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device.

E-Series Surface Mount Mixer 2 – 500 MHz MAMX-007674-LCM1MH V1 P RoHS Compliant Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1, LO = +13 dBm Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 2 - 500 MHz — — — LO Frequency — 2 - 500 MHz — — — IF Frequency — DC - 500 MHz — — — Conversion Loss — 2 - 250 250 - 500 dB dB 5.5 6.0 7.0 8.0 Isolation LO to RF 2 - 20 20 - 250 250 – 500 dB dB dB Isolation LO to IF 2 - 20 20 - 250 250 – 500 dB dB dB Input 1 dB Compression — 0.5 - 500 dBm — — 9 Typical Performance Curves LO - RF Isolation Conversion Loss LO - IF Isolation 0 100 200 300 400 500 Frequency (MHz) dB -70 -60 -50 -40 -30 -20 -10 0 100 200 300 400 500 Frequency (MHz) dB -70 -60 -50 -40 -30 -20 -10 0 100 200 300 400 500 Frequency (MHz) dB